Topic: Toshiba-Samsung 360 Auto Flasher v1.0 (Read 658 times)

geebee · « **Reply #30 on:** July 04, 2006, 02:46:00 AM »

Hammer is a collection of tools...this one is just for flashing the samsung.

Feel free to replace the version in Hammer with this improved one!

KRiSX · « **Reply #31 on:** July 04, 2006, 02:55:00 AM »

mmm nice... just noticed i have a toshiba-samsung drive (IMG:style_emoticons/default/biggrin.gif)

now... do i open my less then a month old 360 to do this or not... lol

sicknasty413 · « **Reply #32 on:** July 04, 2006, 04:15:00 AM »

This is awesome..only if i had a damn samsung (IMG:style_emoticons/default/grr.gif)

nino · « **Reply #33 on:** July 04, 2006, 07:38:00 AM »

I want to get the
PPA 1301 with the VIA6421A chip set at Fry's for 29.99 SKU#3812387
Manufacturer: PPA Int'l: Parts, Peripherals & Accessories
UPC: 33250 00130
Fry's PLU: 3812387

http://shop3.outpost.com/product/3812387?s...CH:MAIN_RSLT_PG

if i use the MTKFLASHvia.zip for this card with this Toshiba-Samsung 360 Auto Flasher v1.0.

http://rapidshare.de/files/20676748/MTKFLASHvia.zip.html

do i rename the MTKFLASHvia.EXE to MTKFLASH.EXE and replace the MTKFLASH.EXE that is in

Toshiba-Samsung_360_Auto_Flasher_v1.0\Firmware\Via

thanx.

lucho · « **Reply #34 on:** July 04, 2006, 09:29:00 AM »

I finally got to test this on a spare sammy today.

I get the following errors:

When performing the Backup, patch and create xtreme fw step (step 1)

It backs up fine 100%, then on the second step I get "Load error: No DPMI Get csdpmi*.zip
C:\Firmware\VIA
Press any key to continue

(when trying to create xtreme.bin with the new patch utility.)

Then continues to step 3 - Creates xtrm0800 fine with ppf patcher fine.

Then I try to use the restore original fw (option D) and I get Updating 00% Error Input File Mismatched.

The drive goes dead until I use another spare sammy to hotswap and then recover.

If any one has any inputs or wants me to try something else let me know. I got a couple sammys to screw with.

Lucho

fozey · « **Reply #35 on:** July 04, 2006, 09:40:00 AM »

Alright, got a few questions..

I have a 512mb MP3 USB Mp3 player.. If i format it the way it tells me to, will the mp3 player still work, heh..

I havnt botherd to buy a sata card, but my other computer i *think* has a via chipset, is that all i need to know?

thanks

geebee · « **Reply #36 on:** July 04, 2006, 09:53:00 AM »

go and buy a 32mb stick for about $1...they are free in cereal boxes lol.

If you "Think" its worth not checking your motherboard manual or website...then flash away (IMG:style_emoticons/default/smile.gif)

fozey · « **Reply #37 on:** July 04, 2006, 09:54:00 AM »

well i was mainly wandering theres certain type of via chipset, some code numbers or so what i could of missed, if its via i can just flash away?

antz1970 · « **Reply #38 on:** July 04, 2006, 09:58:00 AM »

QUOTE(lucho @ Jul 4 2006, 05:44 PM)

I finally got to test this on a spare sammy today.

I get the following errors:

When performing the Backup, patch and create xtreme fw step (step 1)

It backs up fine 100%, then on the second step I get "Load error: No DPMI Get csdpmi*.zip
C:\Firmware\VIA
Press any key to continue

(when trying to create xtreme.bin with the new patch utility.)
Then continues to step 3 - Creates xtrm0800 fine with ppf patcher fine.

Then I try to use the restore original fw (option D) and I get Updating 00% Error Input File Mismatched.

The drive goes dead until I use another spare sammy to hotswap and then recover.

If any one has any inputs or wants me to try something else let me know. I got a couple sammys to screw with.

Lucho

i got this error too ,i chose option "a" cant remember what it was now, backed firmware up fine , then i got that error , but after it had finished all steps it told me "done" i tried a backup but it wouldnt work , originals were fine , i then patched the firmware manually , and reflashed with mtkflash , everything worked fine.

Takenover83 · « **Reply #39 on:** July 04, 2006, 11:19:00 AM »

I get a "cant run in dos" error with the patch command from Option "A", creating Extreme Firmware. Along with the same error mentioned above about needing some zip file.

CODE

Load error: no DPMI - Get csdpmi*.zip

CODE

patch -p orig.bin xtreme.bin

So I ran that command in windows, and sure enough, it worked. So how do we get the patch.exe to run in dos?

Hmm found out some info.

QUOTE

5.5. What is CSDPMI*B.ZIP and why do I need it?
If you use MS-DOS outside of Windows and try to use GNU sed v1.18 or 3.02, you may encounter the following error message:

no DPMI - Get csdpmi*b.zip
"DPMI" stands for DOS Protected Mode Interface; it's basically a means of running DOS in Protected Mode (as opposed to Real Mode), which allows programs to share resources in extended memory without conflicting with one another. Running HIMEM.SYS and EMM386.EXE is not enough. The "CSDPMI*B.ZIP" refers to files written by Charles Sandmann to provide DPMI services for 32-bit computers (i.e., 386SX, 386DX, 486SX, etc.). Download the binary file (the source code is also available):

http://www.delorie.com/djgpp/dl/ofc/simtel...sc/csdpmi5b.zip # binaries
http://www.delorie.com/djgpp/dl/ofc/simtel...sc/csdpmi5s.zip # source
ftp://ftp.cdrom.com/pub/simtelnet/gnu/djg...sc/csdpmi5b.zip # binaries
ftp://ftp.cdrom.com/pub/simtelnet/gnu/djg...sc/csdpmi5s.zip # source
and extract CWSDPMI.EXE, CWSDPR0.EXE and CWSPARAM.EXE from the ZIP file. Put all 3 CWS*.EXE files in the same directory as GSED.EXE and you're all set.

Edit: I tested it, still got the "Cant run in Dos Error", so the extreme firmware was not created in dos.

This post has been edited by Takenover83: Jul 4 2006, 06:30 PM

Manzzon · « **Reply #40 on:** July 04, 2006, 11:36:00 AM »

Got the same problem, I put the files in the zip file in the same dir as the program and booted the usb again. It made a extreme.bin file this time (was asking for some .swp file but doesnt seem to be needed). Choosed 3 and it flashed the samsung with no problems after that. (IMG:style_emoticons/default/smile.gif)

Update..

CWSPARAM "" disables the .swp file...

QUOTE(Takenover83 @ Jul 4 2006, 08:34 PM)

I get a "cant run in dos" error with the patch command from Option "A", creating Extreme Firmware. Along with the same error mentioned above about needing some zip file.

CODE

Load error: no DPMI - Get csdpmi*.zip

CODE

patch -p orig.bin xtreme.bin

So I ran that command in windows, and sure enough, it worked. So how do we get the patch.exe to run in dos?

Hmm found out some info.
Edit: I tested it, still got the "Cant run in Dos Error", so the extreme firmware was not created in dos.

This post has been edited by Manzzon: Jul 4 2006, 06:44 PM

lucho · « **Reply #41 on:** July 04, 2006, 01:23:00 PM »

Good find on that zip file info.

Thanks guys

I ended doing it manually.

Lucho

geebee · « **Reply #42 on:** July 04, 2006, 01:37:00 PM »

yup my bad...go back to my Autoflash v4 which uses KDX for DOS (IMG:style_emoticons/default/sad.gif)

bar-code · « **Reply #43 on:** July 04, 2006, 02:54:00 PM »

QUOTE(geebee @ Jul 5 2006, 06:52 AM)

yup my bad...go back to my Autoflash v4 which uses KDX for DOS (IMG:style_emoticons/default/sad.gif)

Don't mean to be rude where can i find this v4 the geebee version.

Thanks

lucho · « **Reply #44 on:** July 04, 2006, 06:43:00 PM »

The Hammer package has v5.

Thought I would share. That worked the first time.

Thanks geebee!

Lucho

Author Topic: Toshiba-Samsung 360 Auto Flasher v1.0 (Read 658 times)