Print

[Knasen]

I thought I would try to help you out getting the numbers, but I can't find any rows with a 7 byte difference in the previous posts, so sorry I dont know what to do. Either you have more info that you haven't posted here or your sata controllers are special and perhaps not supported.

[dummy333]

QUOTE(Knasen @ Feb 5 2007, 06:11 PM)

I thought I would try to help you out getting the numbers, but I can't find any rows with a 7 byte difference in the previous posts, so sorry I dont know what to do. Either you have more info that you haven't posted here or your sata controllers are special and perhaps not supported.

hi knasen,

thanks for the reply..

hm.. the controller is a vt6421 as you can read in the list above,
and i dont know what other infos you need. so many people have also this chipset on a sata card and everthing goes right.. but for me it does not work... i made a right boot disk with bootmaker. bootmaker includes automaticly the values from the chipset... but the chipset isnt there after samread starts...

[montana64]

hi there is nothing in SCSI but in IDE there is

Nom   Intel® 82801FB Ultra ATA Storage Controllers - 2651
Fabricant   Intel
Statut   OK
ID du périphérique Plug-and-Play   PCI\VEN_8086&DEV_2651&SUBSYS_26511458&REV_03\3&13C0B0C5&0&FA
Port E/S   0x0000F000-0x0000F00F
Pilote   c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3,25 Ko (3 328 Octets), 12/02/2007 11:38)
   
Nom   Canal IDE principal
Fabricant   (Contrôleurs ATA/ATAPI IDE standard)
Statut   OK
ID du périphérique Plug-and-Play   PCIIDE\IDECHANNEL\4&79A9285&0&0
Port E/S   0x000001F0-0x000001F7
Port E/S   0x000003F6-0x000003F6
Canal IRQ   IRQ 14
Pilote   c:\windows\system32\drivers\atapi.sys (5.1.2600.1106 (xpsp1.020828-1920), 84,88 Ko (86 912 Octets), 12/02/2007 11:38)
   
Nom   Canal IDE secondaire
Fabricant   (Contrôleurs ATA/ATAPI IDE standard)
Statut   OK
ID du périphérique Plug-and-Play   PCIIDE\IDECHANNEL\4&79A9285&0&1
Port E/S   0x00000170-0x00000177
Port E/S   0x00000376-0x00000376
Canal IRQ   IRQ 15
Pilote   c:\windows\system32\drivers\atapi.sys (5.1.2600.1106 (xpsp1.020828-1920), 84,88 Ko (86 912 Octets), 12/02/2007 11:38)

what have I to do ?
the first code is 86805126 but then ??
thank you in advance

[montana64]

Is this code 8680512670017603 right ?

[Grim187]

QUOTE(boxxa @ Feb 1 2007, 07:53 PM)

I have been reading tutorials all night and since the xtreme bootmaker wont detect my drive and neither will MTKflash, I need to hex edit it.

The only problem is that I dont have more than one line on my SATA controller. This is my output.

MSINFO32> Components> Storage> SCSI:

Name   SCSI/RAID Host Controller
Manufacturer   (Standard mass storage controllers)
Status   OK
PNP Device ID   ACPI\PNPA000\4&76CE2C95&0
I/O Port   0x0000FFE0-0x0000FFEF
IRQ Channel   IRQ 9
MSINFO32> Components> Storage> IDE:

Name   Intel® 82801EB Ultra ATA Storage Controllers - 24DB
Manufacturer   Intel
Status   OK
PNP Device ID   PCI\VEN_8086&DEV_24DB&SUBSYS_02851014&REV_02\3&61AAA01&0&F9
I/O Port   0x00001880-0x0000188F
Memory Address   0xFEBFFC00-0xFEBFFFFF
Driver   c:\windows\system32\drivers\intelide.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 5.38 KB (5,504 bytes), 12/22/2006 6:17 PM)
   
Name   Primary IDE Channel
Manufacturer   (Standard IDE ATA/ATAPI controllers)
Status   OK
PNP Device ID   PCIIDE\IDECHANNEL\4&331F0F20&0&0
I/O Port   0x000001F0-0x000001F7
I/O Port   0x000003F6-0x000003F6
IRQ Channel   IRQ 14
Driver   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/3/2004 9:07 PM)
   
Name   Secondary IDE Channel
Manufacturer   (Standard IDE ATA/ATAPI controllers)
Status   OK
PNP Device ID   PCIIDE\IDECHANNEL\4&331F0F20&0&1
I/O Port   0x00000170-0x00000177
I/O Port   0x00000376-0x00000376
IRQ Channel   IRQ 15
Driver   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/3/2004 9:07 PM)
Its an integrated intel sata controller with 2 ports. Any idea?

Install Your Driver and try agian

QUOTE(montana64 @ Feb 12 2007, 02:45 AM)

hi there is nothing in SCSI but in IDE there is

Nom   Intel® 82801FB Ultra ATA Storage Controllers - 2651
Fabricant   Intel
Statut   OK
ID du périphérique Plug-and-Play   PCI\VEN_8086&DEV_2651&SUBSYS_26511458&REV_03\3&13C0B0C5&0&FA
Port E/S   0x0000F000-0x0000F00F
Pilote   c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3,25 Ko (3 328 Octets), 12/02/2007 11:38)
   
Nom   Canal IDE principal
Fabricant   (Contrôleurs ATA/ATAPI IDE standard)
Statut   OK
ID du périphérique Plug-and-Play   PCIIDE\IDECHANNEL\4&79A9285&0&0
Port E/S   0x000001F0-0x000001F7
Port E/S   0x000003F6-0x000003F6
Canal IRQ   IRQ 14
Pilote   c:\windows\system32\drivers\atapi.sys (5.1.2600.1106 (xpsp1.020828-1920), 84,88 Ko (86 912 Octets), 12/02/2007 11:38)
   
Nom   Canal IDE secondaire
Fabricant   (Contrôleurs ATA/ATAPI IDE standard)
Statut   OK
ID du périphérique Plug-and-Play   PCIIDE\IDECHANNEL\4&79A9285&0&1
Port E/S   0x00000170-0x00000177
Port E/S   0x00000376-0x00000376
Canal IRQ   IRQ 15
Pilote   c:\windows\system32\drivers\atapi.sys (5.1.2600.1106 (xpsp1.020828-1920), 84,88 Ko (86 912 Octets), 12/02/2007 11:38)

what have I to do ?
the first code is 86805126 but then ??
thank you in advance

Same as Above, Install the Driver and Get Back to me

QUOTE(dummy333 @ Feb 5 2007, 08:46 AM)

hi grimm,

please could you help me??!!

this is my list:

Name   VIA VT6421 RAID Controller
Hersteller   VIA Technologies, Inc.
Status   OK
PNP-Gerätekennung   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&22775069&0&4070
E/A-Port   0x0000BC00-0x0000BC0F
E/A-Port   0x0000B800-0x0000B80F
E/A-Port   0x0000B400-0x0000B40F
E/A-Port   0x0000B000-0x0000B00F
E/A-Port   0x0000AC00-0x0000AC1F
E/A-Port   0x0000A800-0x0000A8FF
IRQ-Kanal   IRQ 19
Treiber   d:\windows\system32\drivers\viamraid.sys (5.1.2600.530, 98,63 KB (100.992 Bytes), 05.02.2007 16:29)
   
Name   SCSI/RAID Host Controller
Hersteller   (Standard mass storage controllers)
Status   OK
PNP-Gerätekennung   ACPI\PNPA000\4&5F4478B1&0
E/A-Port   0x0000FFE0-0x0000FFEF
IRQ-Kanal   IRQ 9

my problem is that when i boot to dos and type in samread + the serial number, my via vt is not showing in the mtkflash menue? what is the problem?

L Revision: 0611 4932 f001 7001
A Revision: 0611 4932 00bc 00b4

QUOTE(re4de2ye0 @ Jan 27 2007, 06:53 AM)

Okay I have read this tutorial a few time but I cannot make any sense of my I/O information.  I am using the SYBA VIA VT6421.  Got the first number no problem but I am not seeing a difference of 7 anywhere.

Item   Value   
Name   VIA VT6421 RAID Controller   
Manufacturer   VIA Technologies, Inc.   
Status   OK   
PNP Device ID   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&3B8BE48B&0&2830   
I/O Port   0x0000DC00-0x0000DC0F   
I/O Port   0x0000D880-0x0000D88F   
I/O Port   0x0000D800-0x0000D80F   
I/O Port   0x0000D480-0x0000D48F   
I/O Port   0x0000D400-0x0000D41F   
I/O Port   0x0000D000-0x0000D0FF   
IRQ Channel   IRQ 20   
Driver   c:\windows\system32\drivers\viamraid.sys (5.1.2600.410, 59.25 KB (60,672 bytes)

Any help would be greatly appreciated.  Thanks in advance.

L Revision: 0611 4932 f001 7001
R Revision: 0611 4932 00DC 00D8

QUOTE(mshack102 @ Jan 15 2007, 08:21 AM)

PNP Device ID   PCI\VEN_8086&DEV_27C3&SUBSYS_26041043&REV_01\3&11583659&0&FA
I/O Port   0x0000E400-0x0000E407
I/O Port   0x0000E080-0x0000E083
I/O Port   0x0000E000-0x0000E007
I/O Port   0x0000DC00-0x0000DC03
I/O Port   0x0000D880-0x0000D88F
Here is my info from my 82801GB/GR/GH ICH7

can someone figure this out.

8680C327

and?? lost on the 2nd part

8680 C327 00e4 00e0

QUOTE(KeyserSosex @ Jan 16 2007, 04:36 AM)

Nombre NVIDIA nForce 590/570/550 Serial ATA Controller
Fabricante NVIDIA Corporation
Estado OK
Id. de dispositivo PNP PCI\VEN_10DE&DEV_037F&SUBSYS_72501462&REV_A2\3&267A616A&0&28
Puerto E/S 0x0000C480-0x0000C487
Puerto E/S 0x0000C400-0x0000C403
Puerto E/S 0x0000C080-0x0000C087
Puerto E/S 0x0000C000-0x0000C003
Puerto E/S 0x0000BC00-0x0000BC0F
Dirección de memoria 0xFE9F9000-0xFE9F9FFF
Canal IRQ IRQ 22
Controlador c:\windows\system32\drivers\nvata.sys (5.10.2600.0666 built by: WinDDK, 98,38 KB (100.736 Bytes), 24/04/2006 17:52)
 
Nombre NVIDIA nForce 590/570/550 Serial ATA Controller
Fabricante NVIDIA Corporation
Estado OK
Id. de dispositivo PNP PCI\VEN_10DE&DEV_037F&SUBSYS_72501462&REV_A2\3&267A616A&0&29
Puerto E/S 0x0000B880-0x0000B887
Puerto E/S 0x0000B800-0x0000B803
Puerto E/S 0x0000B480-0x0000B487
Puerto E/S 0x0000B400-0x0000B403
Puerto E/S 0x0000B080-0x0000B08F
Dirección de memoria 0xFE9F8000-0xFE9F8FFF
Canal IRQ IRQ 23
Controlador c:\windows\system32\drivers\nvata.sys (5.10.2600.0666 built by: WinDDK, 98,38 KB (100.736 Bytes), 24/04/2006 17:52)
 
Nombre NVIDIA nForce 590/570/550 Serial ATA Controller
Fabricante NVIDIA Corporation
Estado OK
Id. de dispositivo PNP PCI\VEN_10DE&DEV_037F&SUBSYS_72501462&REV_A2\3&267A616A&0&2A
Puerto E/S 0x0000B000-0x0000B007
Puerto E/S 0x0000AC00-0x0000AC03
Puerto E/S 0x0000A880-0x0000A887
Puerto E/S 0x0000A800-0x0000A803
Puerto E/S 0x0000A480-0x0000A48F
Dirección de memoria 0xFE9F7000-0xFE9F7FFF
Canal IRQ IRQ 20
DE10 7F03 80C4 80C0.
is the string correct? the bios detect the xbox drive but mtkflash is blind...

yes now do the other 2 so all 5-6 ports can have the drive connected to them

QUOTE(Brighteyes @ Jan 17 2007, 07:36 PM)

if anyone could help me get mtkflash to work i'd appreciate it. I had one that worked great before but the disk has disappeared.

Name   Intel® 82801G (ICH7 Family) Ultra ATA Storage Controllers - 27DF
Manufacturer   Intel
Status   OK
PNP Device ID   PCI\VEN_8086&DEV_27DF&SUBSYS_01A91028&REV_01\3&172E68DD&0&F9
I/O Port   0x0000FFA0-0x0000FFAF
Driver   c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3.25 KB (3,328 bytes), 8/4/2004 7:00 AM)
   
Name   Primary IDE Channel
Manufacturer   (Standard IDE ATA/ATAPI controllers)
Status   OK
PNP Device ID   PCIIDE\IDECHANNEL\4&2D061C90&0&0
I/O Port   0x000001F0-0x000001F7
I/O Port   0x000003F6-0x000003F6
IRQ Channel   IRQ 14
Driver   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/4/2004 7:00 AM)
   
Name   Intel® 82801GR/GH SATA AHCI Controller
Manufacturer   Intel
Status   OK
PNP Device ID   PCI\VEN_8086&DEV_27C1&SUBSYS_01A91028&REV_01\3&172E68DD&0&FA
I/O Port   0x0000FE00-0x0000FE07
I/O Port   0x0000FE10-0x0000FE13
I/O Port   0x0000FE20-0x0000FE27
I/O Port   0x0000FE30-0x0000FE33
I/O Port   0x0000FEA0-0x0000FEAF
Memory Address   0xEFFFFC00-0xEFFFFFFF
IRQ Channel   IRQ 20
Driver   c:\windows\system32\drivers\iastor.sys (6.1.0.1002, 242.00 KB (247,808 bytes), 3/9/2005 10:09 AM)

8680 c127 00fe 20fe

QUOTE(exstazi @ Jan 20 2007, 02:46 PM)

Name   VIA VT6421 RAID Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&1C88B56&0&08A4
I/O Port   0x0000DF00-0x0000DF0F
I/O Port   0x0000DE00-0x0000DE0F
I/O Port   0x0000DD00-0x0000DD0F
I/O Port   0x0000DC00-0x0000DC0F
I/O Port   0x0000DB00-0x0000DB1F
I/O Port   0x0000DA00-0x0000DAFF
IRQ Channel   IRQ 21
Driver   d:\windows\system32\drivers\viamraid.sys (5.1.2600.540, 100,50 KB (102 912 bytes), 2007-01-20 22:40)
   
Ive been reading this thread to make my custom and still have problem..could someone kind just give me the right i/o prt numbers pls

L Revision: 0611 4932 f001 7001
A Revision: 0611 4932 00df 00dd

QUOTE(Spanker_bf @ Jan 22 2007, 12:04 PM)

Hi,

anyone can make the mtkflash to me??
my drive is the TS-H943A ms28 August 2006 and my motherboard is A8N-e.

Waiting for halp...!

Thanks,
Guilherme - Spanker

you gonna have to get a via card or do the vcc trick
your info is missing a digit
try copy and paste

QUOTE(lavos @ Jan 23 2007, 09:19 AM)

please anyone help me...
I can´t do a mktflash modified

Asus K9V-X

Name   VIA Serial ATA RAID Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_3149&SUBSYS_80ED1043&REV_80\3&267A616A&0&78
I/O Port   0x0000E800-0x0000E807
I/O Port   0x0000E400-0x0000E403
I/O Port   0x0000E000-0x0000E007
I/O Port   0x0000D800-0x0000D803
I/O Port   0x0000D400-0x0000D40F
I/O Port   0x0000D000-0x0000D0FF
IRQ Channel   IRQ 20
Driver   d:\windows\system32\drivers\viasraid.sys (5.1.2600.220, 75,50 KB (77.312 bytes), 23/1/2007 12:21)
Anyone can do for me, please??

you have a 8327 you dont need to edit mtkflash, if you want you can edit in the ports for fun
0611 4931 00e8 00e0

QUOTE(noomski @ Jan 25 2007, 09:31 AM)

360 Drive: Samsung m28
PC Motherboard: Asus P5N32 SLi Deluxe
PC Motherboard chipset: nforce

not without the vcc trick

[xtc.sanchez]

Hey,

I cant help myself and dont really know what VIA chipset I have... and xtreme boot maker cant help me with this.

Can you tell me with what values I should fill the boxes "Device ID" and "I/O Port"?

My MSINFO32:

QUOTE

 Name VIA SATA RAID Controller
 Hersteller VIA Technologies, Inc.
 Status OK
 PNP-Gerätekennung PCI\VEN_1106&DEV_3149&SUBSYS_31491849&REV_80\3&267A616A&0&78
 E/A-Port 0x0000EC00-0x0000EC07
 E/A-Port 0x0000E800-0x0000E803
 E/A-Port 0x0000E400-0x0000E407
 E/A-Port 0x0000E000-0x0000E003
 E/A-Port 0x0000DC00-0x0000DC0F
 E/A-Port 0x0000D800-0x0000D8FF
 IRQ-Kanal IRQ 20
 Treiber c:\windows\system32\drivers\viamraid.sys (5.1.2600.300, 71,88 KB (73.600 Bytes), 20.04.2005 09:38)

I dont get it with the 7bytes difference. ^^

greets, san~

[Grim187]

QUOTE(xtc.sanchez @ Feb 18 2007, 04:48 AM)

Hey,

I cant help myself and dont really know what VIA chipset I have... and xtreme boot maker cant help me with this.

Can you tell me with what values I should fill the boxes "Device ID" and "I/O Port"?

My MSINFO32:
I dont get it with the 7bytes difference. ^^

greets, san~

look on the chip, 00ec 00e4

[PlayStation3Br]

I have a motherboard ASUS A7N8X Deluxe, and no have a SATA connector, but i buy a PCI to SATA adaptor and hacking a Hitachi using this adaptor.

Now i have a Samsung MS28 to hacking and this adaptor not see the drive in DOS or Windows.

Using Xtreme Boot Maker, in DOS i see the message:

No Drives found.

I update BIOS of motherboard, turn on Xbox 360 and PC at same time, and others :S

Have a tip?

[mikearama]

Hey Grim, et al... I sure could use a second opinion on what's ailing me.  Been at this for two days (read hundreds of posts)... these ms28's are killing me.

I've installed a via vt6421 pci card into my pc, and added the latest drivers from viaarena.  I have the ms28 setup as expected... power from the console, and long sata cable to pci card.

I've tinkered with xtremebootmaker (both 0.3.6 and 0.5.3), but cannot get a working boot disc.  I can boot to the menu and launch mtkflash (or xread in 0.5.3), and I even get the option of: 2. xtreme, but inevitably stall at the dreaded: "port A400 master/secondary a0" point.

Please peruse my numbers in xtremebootmaker and see if you can find my error.

From msinfo_dump:

[SCSI]

Item   Value   
Name   VIA VT6421 RAID Controller   
Manufacturer   VIA Technologies, Inc.   
Status   OK   
PNP Device ID   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\3&61AAA01&0&58   
I/O Port   0x0000A400-0x0000A40F   
I/O Port   0x0000A800-0x0000A80F   
I/O Port   0x0000AC00-0x0000AC0F   
I/O Port   0x0000B000-0x0000B00F   
I/O Port   0x0000B400-0x0000B41F   
I/O Port   0x0000B800-0x0000B8FF   
IRQ Channel   IRQ 11   
Driver   c:\windows\system32\drivers\viamraid.sys (5.1.2600.540, 100.50 KB (102,912 bytes), 2/23/2007 3:53 PM)   

Xtremebootmaker provides the obvious 11063249 for device ID, and A400AC00 for port.  Like I mentioned, this allows 2. Xtreme to show up in the launch list, but no further.  

I note the difference of 16 in port ranges, but do not fully understand the implications.  I also tried all manner of combinations of all drives plugged in... no drives plugged in... just a dvd drive.

I would appreciate (you have no idea) any thoughts on the port deal.  
Mike

This post has been edited by mikearama: Feb 24 2007, 03:10 PM

[Grim187]

QUOTE(mikearama @ Feb 24 2007, 06:13 AM)

Hey Grim, et al... I sure could use a second opinion on what's ailing me.  Been at this for two days (read hundreds of posts)... these ms28's are killing me.

I've installed a via vt6421 pci card into my pc, and added the latest drivers from viaarena.  I have the ms28 setup as expected... power from the console, and long sata cable to pci card.

I've tinkered with xtremebootmaker (both 0.3.6 and 0.5.3), but cannot get a working boot disc.  I can boot to the menu and launch mtkflash (or xread in 0.5.3), and I even get the option of: 2. xtreme, but inevitably stall at the dreaded: "port A400 master/secondary a0" point.

Please peruse my numbers in xtremebootmaker and see if you can find my error.

From msinfo_dump:

[SCSI]

Item   Value   
Name   VIA VT6421 RAID Controller   
Manufacturer   VIA Technologies, Inc.   
Status   OK   
PNP Device ID   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\3&61AAA01&0&58   
I/O Port   0x0000A400-0x0000A40F   
I/O Port   0x0000A800-0x0000A80F   
I/O Port   0x0000AC00-0x0000AC0F   
I/O Port   0x0000B000-0x0000B00F   
I/O Port   0x0000B400-0x0000B41F   
I/O Port   0x0000B800-0x0000B8FF   
IRQ Channel   IRQ 11   
Driver   c:\windows\system32\drivers\viamraid.sys (5.1.2600.540, 100.50 KB (102,912 bytes), 2/23/2007 3:53 PM)   

Xtremebootmaker provides the obvious 11063249 for device ID, and A400AC00 for port.  Like I mentioned, this allows 2. Xtreme to show up in the launch list, but no further.  

I note the difference of 16 in port ranges, but do not fully understand the implications.  I also tried all manner of combinations of all drives plugged in... no drives plugged in... just a dvd drive.

I would appreciate (you have no idea) any thoughts on the port deal.  
Mike

you have a ms28, use the ms25 bad flash recovery method

[nim001]

hey man i am using asus motherboard P4P800, i think this is one of my sata controllers i was wondering if u could help me out with the code to feed and hex edit mtkflash, u can pm me if u like. Would it be possible that u can make the mtkflash for this?

Thanks in advance man:)

Name   Intel® 82801EB Ultra ATA Storage Controllers
Manufacturer   Intel
Status   OK
PNP Device ID   PCI\VEN_8086&DEV_24D1&SUBSYS_80A61043&REV_02\3&267A616A&0&FA
I/O Port   0x0000EFE0-0x0000EFE7
I/O Port   0x0000EFAC-0x0000EFAF
I/O Port   0x0000EFA0-0x0000EFA7
I/O Port   0x0000EFA8-0x0000EFAB
I/O Port   0x0000EF90-0x0000EF9F
IRQ Channel   IRQ 18
Driver   c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3,25 KB (3.328 bytes), 23-8-2001 14:00)

[KeyserSosex]

Thanx Grimm....buy a sata/pci controller and not have more dramas...

[Grim187]

QUOTE(nim001 @ Feb 28 2007, 01:01 PM)

hey man i am using asus motherboard P4P800, i think this is one of my sata controllers i was wondering if u could help me out with the code to feed and hex edit mtkflash, u can pm me if u like. Would it be possible that u can make the mtkflash for this?

Thanks in advance man:)

Name   Intel® 82801EB Ultra ATA Storage Controllers
Manufacturer   Intel
Status   OK
PNP Device ID   PCI\VEN_8086&DEV_24D1&SUBSYS_80A61043&REV_02\3&267A616A&0&FA
I/O Port   0x0000EFE0-0x0000EFE7
I/O Port   0x0000EFAC-0x0000EFAF
I/O Port   0x0000EFA0-0x0000EFA7
I/O Port   0x0000EFA8-0x0000EFAB
I/O Port   0x0000EF90-0x0000EF9F
IRQ Channel   IRQ 18
Driver   c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3,25 KB (3.328 bytes), 23-8-2001 14:00)

yes, E-mail that info to me and you will get an edited mtkflash back

ps have you tried using xtreme boot maker?

[nierealny]

Hello, he only is visible after the use of extreme boot maker in dos

1 : Pri Master

After the use of mtk183c _ VIA chucks out me the error of

port: 1f0, Master / Slave:b0
Status = 72, should baa 70
ERR: user break.

When I disconnect the drive DVD chuck out that he can not find the device in both cases.

i have this controler http://www.allegro.p...6421_f_vat.html
mobo DFI Lan Party NF4 Ultra-D, LITE-ON DVDRW LH-18A1H and XBOX360 PREMIUM MS28

Nazwa   VIA VT6421 RAID Controller
Producent   VIA Technologies, Inc.
Stan   OK
Identyfikator urządzenia PNP   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&13699180&0&3848
Port We/Wy   0x0000CC00-0x0000CC0F
Port We/Wy   0x0000C800-0x0000C80F
Port We/Wy   0x0000C400-0x0000C40F
Port We/Wy   0x0000C000-0x0000C00F
Port We/Wy   0x0000BC00-0x0000BC1F
Port We/Wy   0x0000B800-0x0000B8FF
Kanał IRQ   IRQ 19
Sterownik   c:\windows\system32\drivers\viamraid.sys (5.1.2600.530, 98,63 KB (100 992 bajtów), 2007-04-15 19:13)
   
Nazwa   SCSI/RAID Host Controller
Producent   (Standard mass storage controllers)
Stan   OK
Identyfikator urządzenia PNP   ACPI\PNPA000\4&3C09E8A2&0
Port We/Wy   0x0000FFE0-0x0000FFEF
Kanał IRQ   IRQ 9
   
Nazwa   SCSI/RAID Host Controller
Producent   (Standard mass storage controllers)
Stan   OK
Identyfikator urządzenia PNP   ACPI\PNPA000\4&3C09E8A2&1
Port We/Wy   0x0000FFA0-0x0000FFAF
Kanał IRQ   IRQ 9

I want flash original bios on modified xtreme 5.1
this the weirdest is that I already installed xtreme and the whole operation ran easily.

PLS send me modifed mktflash.
[email protected]

I apologize for cutting English  

[hecz]

hi I want to know if my sata is compatible ive flashed a lot of hitachis never a samsung Im trying to flash a ms25 and can I power up the drive with the x360 usb to sata? (xecuter)


Name   Intel® 82801EB Ultra ATA Storage Controllers
Manufacturer   Intel
Status   OK
PNP Device ID   PCI\VEN_8086&DEV_24DB&SUBSYS_24D01849&REV_02\3&267A616A&0&F9
I/O Port   0x0000FC00-0x0000FC0F
Memory Address   0xFF37FC00-0xFF37FFFF
Driver   c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3.25 KB (3,328 bytes), 8/23/2001 3:00 AM)
   



Name   D347PRT SCSI Controller
Manufacturer   (Standard mass storage controllers)
Status   OK
PNP Device ID   PCI\D347PRT\0000
Driver   c:\windows\system32\drivers\d347prt.sys (3.47.0.0 built by: WinDDK, 5.13 KB (5,248 bytes), 2/1/2007 2:33 PM)
   
Name   XMASSCSI SCSI Controller
Manufacturer   (Standard mass storage controllers)
Status   OK
PNP Device ID   PCI\XMASSCSI\0000
Driver   c:\windows\system32\drivers\xmasscsi.sys (3.44.0.0 built by: WinDDK, 5.38 KB (5,504 bytes), 4/12/2007 3:26 PM)