xboxscene.org forums

Pages: 1 ... 38 39 [40]

Author Topic: Editing Mtkflash To Work With Your Sata Chipset  (Read 1951 times)

dbarwi1

  • Archived User
  • Newbie
  • *
  • Posts: 3
Editing Mtkflash To Work With Your Sata Chipset
« Reply #585 on: November 19, 2007, 09:42:00 PM »
Can anyone help here?


-  Daniel
Logged

fits79

  • Archived User
  • Jr. Member
  • *
  • Posts: 61
Editing Mtkflash To Work With Your Sata Chipset
« Reply #586 on: November 20, 2007, 02:47:00 AM »
Hi. Can i do anything to work with my intel ich5 sata chipset controller the dosflash 1.4beta at the benq drives?

A lot of thanks
Logged

fits79

  • Archived User
  • Jr. Member
  • *
  • Posts: 61
Editing Mtkflash To Work With Your Sata Chipset
« Reply #587 on: November 20, 2007, 04:44:00 AM »
Ok i'm sorry i don't see it(And cypher21 can you be more polite...).
So i refrase the question.

Is there any way that i can flash with mtkflash the benq drives and i can do that with intel ich5 sata controller?

Finally is there any other way so i can flash the benq drive with my intel ich5 onboard controller???

A lot of thanks.
Logged

antiochos

  • Archived User
  • Newbie
  • *
  • Posts: 16
Editing Mtkflash To Work With Your Sata Chipset
« Reply #588 on: December 19, 2007, 06:44:00 PM »
Adı   ATI SATA Controller IDE mode
Üretici   ATI Technologies Inc
STATUS OK
PNP Aygıt Kimliği   PCI\VEN_1002&DEV_4380&SUBSYS_73271462&REV_00\3&267A616A&0&90
G/Ç Bağlantı Noktası   0x0000B000-0x0000B007
G/Ç Bağlantı Noktası   0x0000A000-0x0000A003
G/Ç Bağlantı Noktası   0x00009000-0x00009007
G/Ç Bağlantı Noktası   0x00008000-0x00008003
G/Ç Bağlantı Noktası   0x00007000-0x0000700F
Bellek Adresi   0xFE7FF800-0xFE7FFBFF
IRQ Kanalı   IRQ 22
Sürücü   c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3,25 KBayt (3.328 Bayt), 04.08.2004 15:00)
   
Adı   Birincil IDE Kanalı
Üretici   (Standart IDE ATA/ATAPI denetleyiciler)
Durum   Tamam
PNP Aygıt Kimliği   PCIIDE\IDECHANNEL\4&1F2585B7&0&0
Sürücü   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93,13 KBayt (95.360 Bayt), 04.08.2004 15:00)
   
Adı   İkincil IDE Kanalı
Üretici   (Standart IDE ATA/ATAPI denetleyiciler)
Durum   Tamam
PNP Aygıt Kimliği   PCIIDE\IDECHANNEL\4&1F2585B7&0&1
Sürücü   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93,13 KBayt (95.360 Bayt), 04.08.2004 15:00)
   
Adı   ATI IDE Controller
Üretici   ATI Technologies Inc
Durum   Tamam
PNP Aygıt Kimliği   PCI\VEN_1002&DEV_438C&SUBSYS_73671462&REV_00\3&267A616A&0&A1
G/Ç Bağlantı Noktası   0x0000FF00-0x0000FF0F
Sürücü   c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3,25 KBayt (3.328 Bayt), 04.08.2004 15:00)
   
Adı   Birincil IDE Kanalı
Üretici   (Standart IDE ATA/ATAPI denetleyiciler)
Durum   Tamam
PNP Aygıt Kimliği   PCIIDE\IDECHANNEL\4&146CABAB&0&0
G/Ç Bağlantı Noktası   0x000001F0-0x000001F7
G/Ç Bağlantı Noktası   0x000003F6-0x000003F6
IRQ Kanalı   IRQ 14
Sürücü   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93,13 KBayt (95.360 Bayt), 04.08.2004 15:00)
   
Adı   İkincil IDE Kanalı
Üretici   (Standart IDE ATA/ATAPI denetleyiciler)
Durum   Tamam
PNP Aygıt Kimliği   PCIIDE\IDECHANNEL\4&146CABAB&0&1
G/Ç Bağlantı Noktası   0x00000170-0x00000177
G/Ç Bağlantı Noktası   0x00000376-0x00000376
IRQ Kanalı   IRQ 15
Sürücü   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93,13 KBayt (95.360 Bayt), 04.08.2004 15:00)


CAN YOU HELP ME?
Logged

djekl

  • Archived User
  • Newbie
  • *
  • Posts: 6
Editing Mtkflash To Work With Your Sata Chipset
« Reply #589 on: January 16, 2008, 04:52:00 PM »
help me with mine plz

IPB Image
Logged

podger

  • Archived User
  • Hero Member
  • *
  • Posts: 501
Editing Mtkflash To Work With Your Sata Chipset
« Reply #590 on: January 16, 2008, 05:04:00 PM »
@djekl.....
It would help if you told us what you need help with.....

check out this tutorial

http://www.360mods.n...al/Textbook.pdf
Logged

gmerk

  • Archived User
  • Newbie
  • *
  • Posts: 2
Editing Mtkflash To Work With Your Sata Chipset
« Reply #591 on: August 24, 2008, 02:08:00 AM »
Hi everybody... I spent too much time trying to figure this out but can someone help... Well GRIM you are a Saint helping people out like this.
Name   VIA RAID Controller - 3249
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&BB7B4AE&0&38F0
I/O Port   0x0000ECF0-0x0000ECFF
I/O Port   0x0000ECD0-0x0000ECDF
I/O Port   0x0000ECB0-0x0000ECBF
I/O Port   0x0000EC90-0x0000EC9F
I/O Port   0x0000EC60-0x0000EC7F
I/O Port   0x0000E800-0x0000E8FF
IRQ Channel   IRQ 10
Driver   e:\windows\system32\drivers\viamraid.sys (5.1.6000.574, 114.50 KB (117,248 bytes), 7/31/2008 11:17 AM)



Can anyone give me any advice on how i should edit HDDHACKR so my 120GB original drive gets recognized so i can copy onto a new WD 120BEV.  I think that my head is about to burst looking at all the hexing.  If I am correct it is the port=MPRT strong that must be changed.  I have tried that but maybe it is just me.  Help please.
Logged

tacitakar

  • Archived User
  • Newbie
  • *
  • Posts: 1
Editing Mtkflash To Work With Your Sata Chipset
« Reply #592 on: November 05, 2008, 02:55:00 PM »
QUOTE
Adı   Standart Çift Kanallı PCI IDE Denetleyici
Üretici   (Standart IDE ATA/ATAPI denetleyiciler)
Durum   Tamam
PNP Aygıt Kimliği   PCI\VEN_10DE&DEV_03EC&SUBSYS_82341043&REV_A2\3&267A616A&0&30
G/Ç Bağlantı Noktası   0x0000FFA0-0x0000FFAF
Sürücü   c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3,25 KBayt (3.328 Bayt), 15.04.2008 15:00)
   
Adı   Birincil IDE Kanalı
Üretici   (Standart IDE ATA/ATAPI denetleyiciler)
Durum   Tamam
PNP Aygıt Kimliği   PCIIDE\IDECHANNEL\4&2A835932&0&0
G/Ç Bağlantı Noktası   0x000001F0-0x000001F7
G/Ç Bağlantı Noktası   0x000003F6-0x000003F6
Sürücü   c:\windows\system32\drivers\atapi.sys (5.1.2600.5512 (xpsp.080413-2108), 94,25 KBayt (96.512 Bayt), 15.04.2008 15:00)
   
Adı   İkincil IDE Kanalı
Üretici   (Standart IDE ATA/ATAPI denetleyiciler)
Durum   Tamam
PNP Aygıt Kimliği   PCIIDE\IDECHANNEL\4&2A835932&0&1
G/Ç Bağlantı Noktası   0x00000170-0x00000177
G/Ç Bağlantı Noktası   0x00000376-0x00000376
Sürücü   c:\windows\system32\drivers\atapi.sys (5.1.2600.5512 (xpsp.080413-2108), 94,25 KBayt (96.512 Bayt), 15.04.2008 15:00)
   
Adı   NVIDIA MCP61 Serial ATA Controller
Üretici   NVIDIA Corporation
Durum   Tamam
PNP Aygıt Kimliği   PCI\VEN_10DE&DEV_03F6&SUBSYS_82341043&REV_A2\3&267A616A&0&40
G/Ç Bağlantı Noktası   0x0000D400-0x0000D407
G/Ç Bağlantı Noktası   0x0000D080-0x0000D083
G/Ç Bağlantı Noktası   0x0000D000-0x0000D007
G/Ç Bağlantı Noktası   0x0000CC00-0x0000CC03
G/Ç Bağlantı Noktası   0x0000C880-0x0000C88F
Bellek Adresi   0xDBFFC000-0xDBFFCFFF
IRQ Kanalı   IRQ 21
Sürücü   c:\windows\system32\drivers\nvata.sys (5.10.2600.0686 built by: WinDDK, 102,88 KBayt (105.344 Bayt), 01.09.2008 19:53)
   
Adı   NVIDIA MCP61 Serial ATA Controller
Üretici   NVIDIA Corporation
Durum   Tamam
PNP Aygıt Kimliği   PCI\VEN_10DE&DEV_03F6&SUBSYS_82341043&REV_A2\3&267A616A&0&41
G/Ç Bağlantı Noktası   0x0000C800-0x0000C807
G/Ç Bağlantı Noktası   0x0000C480-0x0000C483
G/Ç Bağlantı Noktası   0x0000C400-0x0000C407
G/Ç Bağlantı Noktası   0x0000C080-0x0000C083
G/Ç Bağlantı Noktası   0x0000C000-0x0000C00F
Bellek Adresi   0xDBFF7000-0xDBFF7FFF
IRQ Kanalı   IRQ 22
Sürücü   c:\windows\system32\drivers\nvata.sys (5.10.2600.0686 built by: WinDDK, 102,88 KBayt (105.344 Bayt), 01.09.2008 19:53)




what is my correct values? please help me...  sad.gif  thanks!!!
Logged

hakzo

  • Archived User
  • Newbie
  • *
  • Posts: 26
Editing Mtkflash To Work With Your Sata Chipset
« Reply #593 on: June 30, 2009, 06:13:00 AM »
I saw some people on the first page having trouble with the hex numerical system.

Its this basically,

0 1 2 3 4 5 6 7 8 9 A B C D E F

probably won't come to use for anyone and probably been answered already, but meh
Logged
Pages: 1 ... 38 39 [40]
« previous next »