Print

[hecz]

Ive tried iPrep and dont detect my drive

Name   VIA VT6421 RAID Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&2E98101C&0&00F0
I/O Port   0x0000BC00-0x0000BC0F
I/O Port   0x0000B800-0x0000B80F
I/O Port   0x0000B400-0x0000B40F
I/O Port   0x0000B000-0x0000B00F
I/O Port   0x0000AC00-0x0000AC1F
I/O Port   0x0000A800-0x0000A8FF
IRQ Channel   IRQ 21
Driver   c:\windows\system32\drivers\viamraid.sys (5.1.2600.310, 72.38 KB (74,112 bytes), 6/23/2007 6:05 PM)

Name   SCSI/RAID Host Controller
Manufacturer   Unknown Manufacturer
Status   OK
PNP Device ID   PCI\XMASSCSI\0000
Driver   c:\windows\system32\drivers\xmasscsi.sys (3.44.0.0 built by: WinDDK, 5.38 KB (5,504 bytes), 4/12/2007 3:26 PM)

[Grim187]

QUOTE(hecz @ Jun 25 2007, 04:30 AM)

Ive tried iPrep and dont detect my drive

Name   VIA VT6421 RAID Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&2E98101C&0&00F0
I/O Port   0x0000BC00-0x0000BC0F
I/O Port   0x0000B800-0x0000B80F
I/O Port   0x0000B400-0x0000B40F
I/O Port   0x0000B000-0x0000B00F
I/O Port   0x0000AC00-0x0000AC1F
I/O Port   0x0000A800-0x0000A8FF
IRQ Channel   IRQ 21
Driver   c:\windows\system32\drivers\viamraid.sys (5.1.2600.310, 72.38 KB (74,112 bytes), 6/23/2007 6:05 PM)

Name   SCSI/RAID Host Controller
Manufacturer   Unknown Manufacturer
Status   OK
PNP Device ID   PCI\XMASSCSI\0000
Driver   c:\windows\system32\drivers\xmasscsi.sys (3.44.0.0 built by: WinDDK, 5.38 KB (5,504 bytes), 4/12/2007 3:26 PM)

0611 4932 00BC 00B4

[Corrupted]

does anyone have a link to an edited mtkflash for ich7? i have tryed editing it myself but in system information mine only has one i/o port line

[acie24]

its not working for me  

[maciokoki]

SCSI:

Name   D347PRT SCSI Controller
Producent   (Standard mass storage controllers)
Status   OK
PNP devices   PCI\D347PRT\0000
Driver   c:\windows\system32\drivers\d347prt.sys (3.47.0.0 built by: WinDDK, 5,13 KB (5 248 bytes), 2007-06-19 08:47)


IDE:
Name   Controler ALi M5229 PCI Bus Master IDE
Producent   Acer Labs Inc
Status   OK
PNP devices   PCI\VEN_10B9&DEV_5229&SUBSYS_52291849&REV_C7\3&267A616A&0&90
I/O Port   0x0000FF00-0x0000FF0F
Driver   c:\windows\system32\drivers\aliide.sys (1.20, 5,13 KB (5 248 bytes), 2001-08-17 23:51)


What now? (IMG:style_emoticons/default/huh.gif) my board it 939 dual stata2 with chip Uli 1695 / Uli 1567

This post has been edited by maciokoki: Jul 18 2007, 09:59 AM

[bobinsset]

Nom   NVIDIA nForce 430/410 Serial ATA Controller
Fabricant   NVIDIA Corporation
Statut   OK
ID du périphérique Plug-and-Play   PCI\VEN_10DE&DEV_0266&SUBSYS_81C01043&REV_A1\3&2411E6FE&0&70
Port E/S   0x000009F0-0x000009F7
Port E/S   0x00000BF0-0x00000BF3
Port E/S   0x00000970-0x00000977
Port E/S   0x00000B70-0x00000B73
Port E/S   0x0000E000-0x0000E00F
Adresse mémoire   0xFE02D000-0xFE02DFFF
Canal IRQ   IRQ 22
Pilote   c:\windows\system32\drivers\nvata.sys (5.10.2600.0650 built by: WinDDK, 97,25 Ko (99 584 Octets), 13/12/2006 13:14)

tanks you

[NathanJC]

I need some help obtaining hex values:

Name   Initio inic1620 S-ATA Adapter
Manufacturer   INITIO Corp.
Status   OK
PNP Device ID   PCI\VEN_1101&DEV_1622&SUBSYS_16221101&REV_02\4&25296D99&0&58F0
I/O Port   0x00003400-0x000034FF
I/O Port   0x00003000-0x000030FF
I/O Port   0x00002C00-0x00002CFF
I/O Port   0x00002800-0x000028FF
I/O Port   0x00002400-0x000024FF
Memory Address   0xE8110000-0xE8110FFF
IRQ Channel   IRQ 23
Driver   c:\windows\system32\drivers\inic1620.sys (4.06.05.0830 built by: WinDDK, 19.13 KB (19,584 bytes), 8/18/2007 5:14 PM)

Any help is greatly appreciated. Thanks!

[NS91]

I'm completely lost here. Can anyone tell me what values to use from my SATA Controller (although I don't think it's possible with mine):

Name - Intel® 82801FBM Ultra ATA Storage Controllers - 2653
Manufacturer - Intel
Status - OK
PNP Device ID - PCI\VEN_8086&DEV_2653&SUBSYS_01891028&REV_03\3&61AAA01&0&FA
I/O Port - 0x0000BFA0-0x0000BFAF
Driver - c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3.25 KB (3,328 bytes), 8/10/2004 7:00 AM)

Thanks in advance!

[Grim187]

QUOTE(maciokoki @ Jul 18 2007, 02:26 AM)

SCSI:

Name   D347PRT SCSI Controller
Producent   (Standard mass storage controllers)
Status   OK
PNP devices   PCI\D347PRT\0000
Driver   c:\windows\system32\drivers\d347prt.sys (3.47.0.0 built by: WinDDK, 5,13 KB (5 248 bytes), 2007-06-19 08:47)
IDE:
Name   Controler ALi M5229 PCI Bus Master IDE
Producent   Acer Labs Inc
Status   OK
PNP devices   PCI\VEN_10B9&DEV_5229&SUBSYS_52291849&REV_C7\3&267A616A&0&90
I/O Port   0x0000FF00-0x0000FF0F
Driver   c:\windows\system32\drivers\aliide.sys (1.20, 5,13 KB (5 248 bytes), 2001-08-17 23:51)
What now? my board it 939 dual stata2 with chip Uli 1695 / Uli 1567

install the driver for your sata controller

QUOTE(bobinsset @ Jul 22 2007, 11:01 AM)

Nom   NVIDIA nForce 430/410 Serial ATA Controller
Fabricant   NVIDIA Corporation
Statut   OK
ID du périphérique Plug-and-Play   PCI\VEN_10DE&DEV_0266&SUBSYS_81C01043&REV_A1\3&2411E6FE&0&70
Port E/S   0x000009F0-0x000009F7
Port E/S   0x00000BF0-0x00000BF3
Port E/S   0x00000970-0x00000977
Port E/S   0x00000B70-0x00000B73
Port E/S   0x0000E000-0x0000E00F
Adresse mémoire   0xFE02D000-0xFE02DFFF
Canal IRQ   IRQ 22
Pilote   c:\windows\system32\drivers\nvata.sys (5.10.2600.0650 built by: WinDDK, 97,25 Ko (99 584 Octets), 13/12/2006 13:14)

tanks you

de10 6602 f009 7009

QUOTE(NathanJC @ Aug 18 2007, 03:42 AM)

I need some help obtaining hex values:

Name   Initio inic1620 S-ATA Adapter
Manufacturer   INITIO Corp.
Status   OK
PNP Device ID   PCI\VEN_1101&DEV_1622&SUBSYS_16221101&REV_02\4&25296D99&0&58F0
I/O Port   0x00003400-0x000034FF
I/O Port   0x00003000-0x000030FF
I/O Port   0x00002C00-0x00002CFF
I/O Port   0x00002800-0x000028FF
I/O Port   0x00002400-0x000024FF
Memory Address   0xE8110000-0xE8110FFF
IRQ Channel   IRQ 23
Driver   c:\windows\system32\drivers\inic1620.sys (4.06.05.0830 built by: WinDDK, 19.13 KB (19,584 bytes), 8/18/2007 5:14 PM)

Any help is greatly appreciated. Thanks!

0111 2216 0034 002c

QUOTE(NS91 @ Aug 20 2007, 03:51 PM)

I'm completely lost here. Can anyone tell me what values to use from my SATA Controller (although I don't think it's possible with mine):

Name - Intel® 82801FBM Ultra ATA Storage Controllers - 2653
Manufacturer - Intel
Status - OK
PNP Device ID - PCI\VEN_8086&DEV_2653&SUBSYS_01891028&REV_03\3&61AAA01&0&FA
I/O Port - 0x0000BFA0-0x0000BFAF
Driver - c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3.25 KB (3,328 bytes), 8/10/2004 7:00 AM)

Thanks in advance!

thats an ide controller, try installing your sata chipset's driver.

[NS91]

QUOTE

thats an ide controller, try installing your sata chipset's driver.

Where can I find those at? And is it a definite that I have a SATA controller in my computer?

[NathanJC]

Now that I have my hex value (0111 2216 0034 002c), where do I inject it into mtkflash using Hex Workshop? Every tutorial I have found is no help to me as they only edit values for chipsets listed that they own (mine's a Initio inic1620 S-ATA Adapter).  

[NathanJC]

QUOTE(NathanJC @ Aug 21 2007, 10:30 PM)

Now that I have my hex value (0111 2216 0034 002c), where do I inject it into mtkflash using Hex Workshop? Every tutorial I have found is no help to me as they only edit values for chipsets listed that they own (mine's a Initio inic1620 S-ATA Adapter).  

C'mon guys, I know someone out there has an answer!

[dalink36]

whats good people!! can i get a little help here please im trying to flash my sammy/tos m28 dive but im running into mad problems...i have a vt6421 pci card but its not reconizing my drive...heres the specs:::


Name   VIA VT6421 RAID Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&5C2F873&0&10F0
I/O Port   0x0000EF00-0x0000EF0F
I/O Port   0x0000EE00-0x0000EE0F
I/O Port   0x0000ED00-0x0000ED0F
I/O Port   0x0000EC00-0x0000EC0F
I/O Port   0x0000EB00-0x0000EB1F
I/O Port   0x0000E800-0x0000E8FF
IRQ Channel   IRQ 19
Driver   c:\windows\system32\drivers\viamraid.sys (6.0.6000.6142, 110.50 KB (113,152 bytes), 6/26/2007 10:59 PM)
   
Name   SCSI/RAID Host Controller
Manufacturer   (Standard mass storage controllers)
Status   OK
PNP Device ID   ACPI\PNPA000\4&5D18F2DF&0
I/O Port   0x0000FFE0-0x0000FFEF
IRQ Channel   IRQ 9
   
Name   Microsoft iSCSI Initiator
Manufacturer   Microsoft
Status   OK
PNP Device ID   ROOT\ISCSIPRT\0000
Driver   c:\windows\system32\drivers\msiscsi.sys (6.0.6000.16386, 164.60 KB (168,552 bytes), 11/2/2006 4:52 AM)






so since that didnt work i tried my onboard sata controller.. it reconize my drive but when i select it i get a fail to initial ide port error...can someone help me out pleeeaase? heres is the specs to my onboard on..



Name   Intel® 82801G (ICH7 Family) Ultra ATA Storage Controllers - 27DF
Manufacturer   Intel
Status   OK
PNP Device ID   PCI\VEN_8086&DEV_27DF&SUBSYS_1B761019&REV_01\3&2411E6FE&0&F9
I/O Port   0x0000FA00-0x0000FA0F
Driver   c:\windows\system32\drivers\pciide.sys (6.0.6000.16386, 13.10 KB (13,416 bytes), 11/2/2006 4:51 AM)
   
Name   ATA Channel 0
Manufacturer   (Standard IDE ATA/ATAPI controllers)
Status   OK
PNP Device ID   PCIIDE\IDECHANNEL\4&1F89409C&0&0
I/O Port   0x000001F0-0x000001F7
I/O Port   0x000003F6-0x000003F6
IRQ Channel   IRQ 14
Driver   c:\windows\system32\drivers\atapi.sys (6.0.6000.16386, 18.60 KB (19,048 bytes), 11/2/2006 4:51 AM)
   
Name   Intel® 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller - 27C0
Manufacturer   Intel
Status   OK
PNP Device ID   PCI\VEN_8086&DEV_27C0&SUBSYS_1B761019&REV_01\3&2411E6FE&0&FA
I/O Port   0x0000F900-0x0000F907
I/O Port   0x0000F800-0x0000F803
I/O Port   0x0000F700-0x0000F707
I/O Port   0x0000F600-0x0000F603
I/O Port   0x0000F500-0x0000F50F
IRQ Channel   IRQ 19
Driver   c:\windows\system32\drivers\pciide.sys (6.0.6000.16386, 13.10 KB (13,416 bytes), 11/2/2006 4:51 AM)
   
Name   ATA Channel 0
Manufacturer   (Standard IDE ATA/ATAPI controllers)
Status   OK
PNP Device ID   PCIIDE\IDECHANNEL\4&10F07810&0&0
Driver   c:\windows\system32\drivers\atapi.sys (6.0.6000.16386, 18.60 KB (19,048 bytes), 11/2/2006 4:51 AM)
   
Name   ATA Channel 1
Manufacturer   (Standard IDE ATA/ATAPI controllers)
Status   OK
PNP Device ID   PCIIDE\IDECHANNEL\4&10F07810&0&1
Driver   c:\windows\system32\drivers\atapi.sys (6.0.6000.16386, 18.60 KB (19,048 bytes), 11/2/2006 4:51 AM)

[abrasmateus]

OK. This is the first time i try to manual edit mtkflash. Ive flashed a lot of drives but was using VIA Chipset. The thing is, can i edit it since my chipset is INTEL now?I mean, if i edit, will it work?
thanks a lot.

This is my info:

Name                    Intel® ICH8 4 port Serial ATA Storage Controller - 2820
Manufacturer   Intel
Status                   OK
PNP Device ID   PCI\VEN_8086&DEV_2820&SUBSYS_514D8086&REV_02\3&18D45AA6&0&FA
I/O Port                   0x00003138-0x0000313F
I/O Port                   0x0000314C-0x0000314F
I/O Port                   0x00003130-0x00003137
I/O Port                   0x00003148-0x0000314B
I/O Port                   0x00003110-0x0000311F
I/O Port                   0x00003100-0x0000310F
IRQ Channel   IRQ 19
Driver   c:\windows\system32\drivers\intelide.sys (6.0.6000.16386, 16,10 KB (16.488 bytes), 02/11/2006 06:38)

MY sequence is
86802028
38313031
is that right?

PS: This info is under IDE not SCSI
and there is another one just like this but with some few diferences

This post has been edited by abrasmateus: Aug 28 2007, 02:22 AM

[jrokker69]

My info was under IDE as well.  Mine worked fine contrary to someone telling me it wouldn't.  Not sure how they came to that conclusions, but whatever.  Those numbers/letters are correct.  Mine worked without changing the second set of numbers/letters.  Mtkflash should find the I/O port part by itself.

BTW if ne one needs a link to the enable0800.iso here it is:

http://www.360mods.net/files/activate.zip

This post has been edited by jrokker69: Aug 28 2007, 02:54 AM