Print

[mattymat04]

Grim187 does excellent work bought a samsung drive from him and it brought my xbox360 back to life!!!!Super fast shipping

[mshack102]

PNP Device ID   PCI\VEN_8086&DEV_27C3&SUBSYS_26041043&REV_01\3&11583659&0&FA
I/O Port   0x0000E400-0x0000E407
I/O Port   0x0000E080-0x0000E083
I/O Port   0x0000E000-0x0000E007
I/O Port   0x0000DC00-0x0000DC03
I/O Port   0x0000D880-0x0000D88F


Here is my info from my 82801GB/GR/GH ICH7

can someone figure this out.

8680C327

and?? lost on the 2nd part

[mshack102]

QUOTE(mshack102 @ Jan 15 2007, 11:21 AM)

PNP Device ID   PCI\VEN_8086&DEV_27C3&SUBSYS_26041043&REV_01\3&11583659&0&FA
I/O Port   0x0000E400-0x0000E407
I/O Port   0x0000E080-0x0000E083
I/O Port   0x0000E000-0x0000E007
I/O Port   0x0000DC00-0x0000DC03
I/O Port   0x0000D880-0x0000D88F
Here is my info from my 82801GB/GR/GH ICH7

can someone figure this out.

8680C327

and?? lost on the 2nd part

I was just informed, editing MTKFlash is not needed with Xtreme BootMaker as you select your SATA controller and it autoperforms the edit itself. Is this correct??

[KeyserSosex]

Nombre NVIDIA nForce 590/570/550 Serial ATA Controller
Fabricante NVIDIA Corporation
Estado OK
Id. de dispositivo PNP PCI\VEN_10DE&DEV_037F&SUBSYS_72501462&REV_A2\3&267A616A&0&28
Puerto E/S 0x0000C480-0x0000C487
Puerto E/S 0x0000C400-0x0000C403
Puerto E/S 0x0000C080-0x0000C087
Puerto E/S 0x0000C000-0x0000C003
Puerto E/S 0x0000BC00-0x0000BC0F
Dirección de memoria 0xFE9F9000-0xFE9F9FFF
Canal IRQ IRQ 22
Controlador c:\windows\system32\drivers\nvata.sys (5.10.2600.0666 built by: WinDDK, 98,38 KB (100.736 Bytes), 24/04/2006 17:52)
 
Nombre NVIDIA nForce 590/570/550 Serial ATA Controller
Fabricante NVIDIA Corporation
Estado OK
Id. de dispositivo PNP PCI\VEN_10DE&DEV_037F&SUBSYS_72501462&REV_A2\3&267A616A&0&29
Puerto E/S 0x0000B880-0x0000B887
Puerto E/S 0x0000B800-0x0000B803
Puerto E/S 0x0000B480-0x0000B487
Puerto E/S 0x0000B400-0x0000B403
Puerto E/S 0x0000B080-0x0000B08F
Dirección de memoria 0xFE9F8000-0xFE9F8FFF
Canal IRQ IRQ 23
Controlador c:\windows\system32\drivers\nvata.sys (5.10.2600.0666 built by: WinDDK, 98,38 KB (100.736 Bytes), 24/04/2006 17:52)
 
Nombre NVIDIA nForce 590/570/550 Serial ATA Controller
Fabricante NVIDIA Corporation
Estado OK
Id. de dispositivo PNP PCI\VEN_10DE&DEV_037F&SUBSYS_72501462&REV_A2\3&267A616A&0&2A
Puerto E/S 0x0000B000-0x0000B007
Puerto E/S 0x0000AC00-0x0000AC03
Puerto E/S 0x0000A880-0x0000A887
Puerto E/S 0x0000A800-0x0000A803
Puerto E/S 0x0000A480-0x0000A48F
Dirección de memoria 0xFE9F7000-0xFE9F7FFF
Canal IRQ IRQ 20


DE10 7F03 80C4 80C0.
is the string correct? the bios detect the xbox drive but mtkflash is blind...

[Brighteyes]

if anyone could help me get mtkflash to work i'd appreciate it. I had one that worked great before but the disk has disappeared.

Name   Intel® 82801G (ICH7 Family) Ultra ATA Storage Controllers - 27DF
Manufacturer   Intel
Status   OK
PNP Device ID   PCI\VEN_8086&DEV_27DF&SUBSYS_01A91028&REV_01\3&172E68DD&0&F9
I/O Port   0x0000FFA0-0x0000FFAF
Driver   c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3.25 KB (3,328 bytes), 8/4/2004 7:00 AM)
   
Name   Primary IDE Channel
Manufacturer   (Standard IDE ATA/ATAPI controllers)
Status   OK
PNP Device ID   PCIIDE\IDECHANNEL\4&2D061C90&0&0
I/O Port   0x000001F0-0x000001F7
I/O Port   0x000003F6-0x000003F6
IRQ Channel   IRQ 14
Driver   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/4/2004 7:00 AM)
   
Name   Intel® 82801GR/GH SATA AHCI Controller
Manufacturer   Intel
Status   OK
PNP Device ID   PCI\VEN_8086&DEV_27C1&SUBSYS_01A91028&REV_01\3&172E68DD&0&FA
I/O Port   0x0000FE00-0x0000FE07
I/O Port   0x0000FE10-0x0000FE13
I/O Port   0x0000FE20-0x0000FE27
I/O Port   0x0000FE30-0x0000FE33
I/O Port   0x0000FEA0-0x0000FEAF
Memory Address   0xEFFFFC00-0xEFFFFFFF
IRQ Channel   IRQ 20
Driver   c:\windows\system32\drivers\iastor.sys (6.1.0.1002, 242.00 KB (247,808 bytes), 3/9/2005 10:09 AM)

[exstazi]

Name   VIA VT6421 RAID Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&1C88B56&0&08A4
I/O Port   0x0000DF00-0x0000DF0F
I/O Port   0x0000DE00-0x0000DE0F
I/O Port   0x0000DD00-0x0000DD0F
I/O Port   0x0000DC00-0x0000DC0F
I/O Port   0x0000DB00-0x0000DB1F
I/O Port   0x0000DA00-0x0000DAFF
IRQ Channel   IRQ 21
Driver   d:\windows\system32\drivers\viamraid.sys (5.1.2600.540, 100,50 KB (102 912 bytes), 2007-01-20 22:40)
   
Ive been reading this thread to make my custom and still have problem..could someone kind just give me the right i/o prt numbers pls

[Spanker_bf]

Hi,

anyone can make the mtkflash to me??

QUOTE(Spanker_bf)

Nombre NVIDIA nForce4 Serial ATA Controller
Fabricante NVIDIA Corporation
Estado OK
Id. de dispositivo PNP PCI/VEN_100&DEV_0055&SUBSYS_815A1043&REV_F3/3&2411E6FE&0%40
Puerto E/S 0X000009E0-0x000009E7
Puerto E/S 0x00000BE0-0x00000BE3
Puerto E/S 0x00000960-0x00000967
Puerto E/S 0x00000B60-0x00000B63
Puerto E/S 0x0000D400-0x0000D40F
Puerto E/S 0xD3101000-0xD3101FFF
Canal IRQ IRQ 23
Controlador c:\windows\system32\drivers\nvata.sys (5.10.2600.0534 built by: WinDDk, 90,63 KB (92.800 bytes), 16/1/2007 01:24)

my drive is the TS-H943A ms28 August 2006 and my motherboard is A8N-e.

Waiting for halp...!

Thanks,
Guilherme - Spanker

This post has been edited by Spanker_bf: Jan 22 2007, 08:58 PM

[lavos]

please anyone help me...
I can´t do a mktflash modified (IMG:style_emoticons/default/sad.gif)

Asus K9V-X

Name   VIA Serial ATA RAID Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_3149&SUBSYS_80ED1043&REV_80\3&267A616A&0&78
I/O Port   0x0000E800-0x0000E807
I/O Port   0x0000E400-0x0000E403
I/O Port   0x0000E000-0x0000E007
I/O Port   0x0000D800-0x0000D803
I/O Port   0x0000D400-0x0000D40F
I/O Port   0x0000D000-0x0000D0FF
IRQ Channel   IRQ 20
Driver   d:\windows\system32\drivers\viasraid.sys (5.1.2600.220, 75,50 KB (77.312 bytes), 23/1/2007 12:21)


Anyone can do for me, please??

This post has been edited by lavos: Jan 23 2007, 06:16 PM

[The Bison]

Hi folks, hope someone can help me out with my setup.

I've used the xtreme boot maker (following Textbooks tut to the letter) to flash my bios but I get stuck when I boot from my USB key, run samread... and then select the device from the list. The app just hangs and my only option is to press escape and halt the process.

I have tried cd/hard disk combo using ntfsdos to see if that makes any difference in case my usb key was failing to write, but after further research in the forums I reckon the problem stems from the fact that my dvd-drive cannot read. (mtkflash does offer me two options to choose from number 1 is 'EXTREME' and number 2 is 'Si3114' I have tried both and got the same result for each.)

As well as using the samread batch file, I have also run the mtkflash r /m /sata orig.bin command manually which yields no better result.

My setup is a Asus K8N-E Deluxe with the Si3114 (SoftRaid5) chipset onboard.
I am using the master port on the primary channel of the onboard sata.
I have the Samsung M25 dvd drive.

My info from msinfo32 is:

Name   Silicon Image SiI 3114 SoftRaid 5 Controller
Manufacturer   Silicon Image
Status   OK
PNP Device ID   PCI\VEN_1095&DEV_3114&SUBSYS_81361043&REV_02\4&22775069&0&6070
I/O Port   0x0000C400-0x0000C407
I/O Port   0x0000C000-0x0000C003
I/O Port   0x0000BC00-0x0000BC07
I/O Port   0x0000B800-0x0000B803
I/O Port   0x0000B400-0x0000B40F
Memory Address   0xFF5FF400-0xFF5FF7FF
IRQ Channel   IRQ 19
Driver   c:\windows\system32\drivers\si3114r5.sys (1, 5, 10, 0, 197.30 KB (202,032 bytes), 05/09/2006 18:48)

So I think to edit the hex of mtkflash.exe manually I would need to enter in 9501 1431 and 00C4 00BC (Is that correct?)

It's been ages since I've done any hex editing and I am a little unsure that I am selecting the appropriate characters. If I select where is says 'Si3114' on the right hand side in Hex Workshop the actual hex selection in the main screen is not four sets of four digits but it actually selects: '53 6933 3131 34' (with those exact spacings/groupings). What/how exactly should I be selecting to ensure I get it right?

I understand from reading through a lot of this thread already that the chipset entries are separated by '0000' (Is that right or have I misunderstood?)  but there are some instances where sequence in the hex has '0000 0000' so I cannot tell from which entry I should start my selection.

Anyone else managed to get this combination of pc mobo and 360 dvd to work?
Any pointers much appreciated. Cheers.

[The Bison]

I have continued digging and have found several comments saying that the Si3114 is just as useless as the Si3112. I'm now buying a VIA 6421A PCI card instead. Hopefully have more luck with that.

Still that'll take a couple of days to reach me so if anyone knows how to get my existing setup flashed, please let me know.

[noomski]

360 Drive: Samsung m28
PC Motherboard: Asus P5N32 SLi Deluxe
PC Motherboard chipset: nforce

Hi, Ive been reading up on mtk flash but still can't get it to work. Here's what I've done so far:

(IMG:http://img244.imageshack.us/img244/3295/ms8yx.gif)
Here's my drive info

From this i reckon the numbers I need are 9510 3231 00CC 00C8

(IMG:http://img172.imageshack.us/img172/4093/original8qi.gif)
Here I think is where they should go

(IMG:http://img260.imageshack.us/img260/7205/edited7gc.gif)
This is what it looks like after editing

I've saved this MTKFLASH.EXE and copied it onto the properly formatted MS DOS startup disk.

I then turned off my pc, removed my 2 sata hdd's and plugged the sata from the xbox into 'SATA1'. Next I booted into my bios and turned off RAID then saved and exited.

Rebooted into DOS and tried MTKflash r /m backup.bin also tried mtkflash r mydump.bin and mtkflash r backup.bin

None of these commands brought up my drive - can anyone tell me where i am possibly going wrong with this?  Many thanks

[emaborsa]

Hi to all. I'm from italy, i have a ms28 and a PCI SATA card with VIA6421 chipset. My problem? i can't see my sammy under DOS.... need help, please.

[re4de2ye0]

Okay I have read this tutorial a few time but I cannot make any sense of my I/O information.  I am using the SYBA VIA VT6421.  Got the first number no problem but I am not seeing a difference of 7 anywhere.

Item   Value   
Name   VIA VT6421 RAID Controller   
Manufacturer   VIA Technologies, Inc.   
Status   OK   
PNP Device ID   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&3B8BE48B&0&2830   
I/O Port   0x0000DC00-0x0000DC0F   
I/O Port   0x0000D880-0x0000D88F   
I/O Port   0x0000D800-0x0000D80F   
I/O Port   0x0000D480-0x0000D48F   
I/O Port   0x0000D400-0x0000D41F   
I/O Port   0x0000D000-0x0000D0FF   
IRQ Channel   IRQ 20   
Driver   c:\windows\system32\drivers\viamraid.sys (5.1.2600.410, 59.25 KB (60,672 bytes)

Any help would be greatly appreciated.  Thanks in advance.

[boxxa]

I have been reading tutorials all night and since the xtreme bootmaker wont detect my drive and neither will MTKflash, I need to hex edit it.

The only problem is that I dont have more than one line on my SATA controller. This is my output.

MSINFO32> Components> Storage> SCSI:

Name   SCSI/RAID Host Controller
Manufacturer   (Standard mass storage controllers)
Status   OK
PNP Device ID   ACPI\PNPA000\4&76CE2C95&0
I/O Port   0x0000FFE0-0x0000FFEF
IRQ Channel   IRQ 9


MSINFO32> Components> Storage> IDE:

Name   Intel® 82801EB Ultra ATA Storage Controllers - 24DB
Manufacturer   Intel
Status   OK
PNP Device ID   PCI\VEN_8086&DEV_24DB&SUBSYS_02851014&REV_02\3&61AAA01&0&F9
I/O Port   0x00001880-0x0000188F
Memory Address   0xFEBFFC00-0xFEBFFFFF
Driver   c:\windows\system32\drivers\intelide.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 5.38 KB (5,504 bytes), 12/22/2006 6:17 PM)
   
Name   Primary IDE Channel
Manufacturer   (Standard IDE ATA/ATAPI controllers)
Status   OK
PNP Device ID   PCIIDE\IDECHANNEL\4&331F0F20&0&0
I/O Port   0x000001F0-0x000001F7
I/O Port   0x000003F6-0x000003F6
IRQ Channel   IRQ 14
Driver   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/3/2004 9:07 PM)
   
Name   Secondary IDE Channel
Manufacturer   (Standard IDE ATA/ATAPI controllers)
Status   OK
PNP Device ID   PCIIDE\IDECHANNEL\4&331F0F20&0&1
I/O Port   0x00000170-0x00000177
I/O Port   0x00000376-0x00000376
IRQ Channel   IRQ 15
Driver   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/3/2004 9:07 PM)


Its an integrated intel sata controller with 2 ports. Any idea?

[dummy333]

hi grimm,

please could you help me??!!

this is my list:

Name   VIA VT6421 RAID Controller
Hersteller   VIA Technologies, Inc.
Status   OK
PNP-Gerätekennung   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&22775069&0&4070
E/A-Port   0x0000BC00-0x0000BC0F
E/A-Port   0x0000B800-0x0000B80F
E/A-Port   0x0000B400-0x0000B40F
E/A-Port   0x0000B000-0x0000B00F
E/A-Port   0x0000AC00-0x0000AC1F
E/A-Port   0x0000A800-0x0000A8FF
IRQ-Kanal   IRQ 19
Treiber   d:\windows\system32\drivers\viamraid.sys (5.1.2600.530, 98,63 KB (100.992 Bytes), 05.02.2007 16:29)
   
Name   SCSI/RAID Host Controller
Hersteller   (Standard mass storage controllers)
Status   OK
PNP-Gerätekennung   ACPI\PNPA000\4&5F4478B1&0
E/A-Port   0x0000FFE0-0x0000FFEF
IRQ-Kanal   IRQ 9

my problem is that when i boot to dos and type in samread + the serial number, my via vt is not showing in the mtkflash menue? what is the problem?