Print

[Marcquez]

Im now trying for 3 days to flash my samsung(ms25) drive.
But i get stuk after i choose my Drive (sec master).
i get     "port: 960, Master/Slave: a0"    then nothing anymore (IMG:style_emoticons/default/sad.gif)

Now im thinking that i have to customize my mtkflash, but that ain't going well either (IMG:style_emoticons/default/smile.gif)
I allready tried the MTKFLASH for NForce mobo's, but no go.

specs mobo: A8N SLI Nforce4 (SATA)

In systeminfo32:
Naam                   SCSI/RAID-hostcontroller
Fabrikant                   (Standard mass storage controllers)
Status                   OK
PNP-apparaat-ID   ACPI\PNPA000\4&6CD500CD&0
I/O-poort                   0x0000FFE0-0x0000FFEF
IRQ-kanaal   IRQ 9
Stuurprogramma   c:\windows\system32\drivers\dtscsi.sys (, 217,90 kB (223.128 bytes), 19/07/2006   1:51)


I think its weird that i only see 1 "I/O Port" and with all the other in this topic, there are lots more.
I don't know anymore what to do (IMG:style_emoticons/default/smile.gif)

[Grim187]

QUOTE(Marcquez @ Oct 4 2006, 06:17 AM)

Im now trying for 3 days to flash my samsung(ms25) drive.
But i get stuk after i choose my Drive (sec master).
i get     "port: 960, Master/Slave: a0"    then nothing anymore (IMG:style_emoticons/default/sad.gif)

Now im thinking that i have to customize my mtkflash, but that ain't going well either (IMG:style_emoticons/default/smile.gif)
I allready tried the MTKFLASH for NForce mobo's, but no go.

specs mobo: A8N SLI Nforce4 (SATA)

In systeminfo32:
Naam                   SCSI/RAID-hostcontroller
Fabrikant                   (Standard mass storage controllers)
Status                   OK
PNP-apparaat-ID   ACPI\PNPA000\4&6CD500CD&0
I/O-poort                   0x0000FFE0-0x0000FFEF
IRQ-kanaal   IRQ 9
Stuurprogramma   c:\windows\system32\drivers\dtscsi.sys (, 217,90 kB (223.128 bytes), 19/07/2006   1:51)
I think its weird that i only see 1 "I/O Port" and with all the other in this topic, there are lots more.
I don't know anymore what to do (IMG:style_emoticons/default/smile.gif)

Nf4 and Intel chipsets are in ide

QUOTE(Kreten @ Sep 27 2006, 12:47 PM)

i have a friend with ASUS mobo and Chipsets
North Bridge    VIA P4M800
South Bridge    VIA VT8237R

will that work?

that will work great, its what i have and requires no mtkflash mod, make sure you dont plug the drive in untill your in dos tho


This post has been edited by Grim187: Oct 4 2006, 11:45 PM

[Marcquez]

QUOTE(Grim187 @ Oct 5 2006, 12:51 AM)

Nf4 and Intel chipsets are in ide

Thanks, pretty dumb of me (IMG:style_emoticons/default/tongue.gif)
I've put the info under IDE in another post (so if ur interested, plz check here)

[sirrelix]

Hello All,

Name   VIA VT6421 RAID Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&1F7DBC9F&0&20F0
I/O Port   0x00009000-0x0000900F
I/O Port   0x00009400-0x0000940F
I/O Port   0x00009800-0x0000980F
I/O Port   0x00009C00-0x00009C0F
I/O Port   0x0000A000-0x0000A01F
I/O Port   0x0000A400-0x0000A4FF
IRQ Channel   IRQ 18
Driver   c:\windows\system32\drivers\viamraid.sys (5.1.2600.410, 59.25 KB (60,672 bytes), 10/4/2006 5:23 PM)

Is the setup I'm getting from that dandy $9.99 card from Newegg.com. I have F/W ms25 Ver. A. april 2006. I have tried all the previously linked pre-edited MTKflash's and not one works I'n getting the "port: 170, Master/Slave: a0" then it stops... nothing else. Any suggestions? Thanks alot!

[StayingOccupied]

Name   VIA SATA RAID Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_3149&SUBSYS_31491106&REV_80\3&13C0B0C5&0&78
I/O Port   0x0000B400-0x0000B407
I/O Port   0x0000B800-0x0000B803
I/O Port   0x0000BC00-0x0000BC07
I/O Port   0x0000C000-0x0000C003
I/O Port   0x0000C400-0x0000C40F
I/O Port   0x0000C800-0x0000C8FF
IRQ Channel   IRQ 20
Driver   c:\windows\system32\drivers\viamraid.sys (5.1.2600.430, 59.50 KB (60,928 bytes), 6/10/2006 11:06 AM)

from this i got 0611 4931 0084 008C as the numbers i need? I'm still not 100% sure where to put those numbers in in mtkflash. I appreciate any help.

[XSFSPD]

Well after reading 10 pages of this thread and trying over and over, just thought I'd ask before I kill mysef.

I have Name   VIA VT6421 RAID Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&CF81C54&0&08F0
I/O Port   0x0000B400-0x0000B40F
I/O Port   0x0000B000-0x0000B00F
I/O Port   0x0000A800-0x0000A80F
I/O Port   0x0000A400-0x0000A40F
I/O Port   0x0000A000-0x0000A01F
I/O Port   0x00009800-0x000098FF
IRQ Channel   IRQ 22
Driver   c:\windows\system32\drivers\viamraid.sys (5.1.2600.410, 59.25 KB (60,672 bytes), 10/5/2006 7:17 PM)

I have edited MTKFLASHvia.exe with 0611 4932 00B4 00A8

No matter what I do it goes straight to " Port: b400, Master/Slave: a0

Someone please help the retard??? (IMG:style_emoticons/default/laugh.gif)

Thanks!

[Klutsh]

QUOTE(StayingOccupied @ Oct 6 2006, 12:19 AM)

0611 4931 0084 008C

Should be 0611 4931 00B4 00BC

Thats a letter b, not the number eight

zero six one one four nine three one zero zero b four zero zero eight c

This post has been edited by Klutsh: Oct 6 2006, 08:43 AM

[StayingOccupied]

QUOTE(Klutsh @ Oct 6 2006, 08:48 AM)

Should be 0611 4931 00B4 00BC

Thats a letter b, not the number eight

zero six one one four nine three one zero zero b four zero zero eight c

thanks man, i guess sitting far from my LCD screen in a recliner is starting to effect what i see!

[odgaf]

ok dont laugh im doing this on an old ibm dx2-66  computer running win98 it has the via sata vt6421a pci card installed and i get the old no drive detected or it hangs on the ao port

heres the msinfo printout on the win98 sigh, oi i said dont laugh

 VIA VT6421 RAID Controller
    SCSIAdapter
    Registry Key:                            HKEY_LOCAL_MACHINE\enum\PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\BUS_00&DEV_0B&FUNC_00
    Alloc resources:                        Logical Configuration 0

IRQ:                                           10 Mask: xFFFF
    IO Range:                 Base=xA000 End=xA00F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                    Base=xA400 End=xA40F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                    Base=xA800 End=xA80F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                    Base=xAC00 End=xAC0F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                    Base=xB000 End=xB01F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                    Base=xB400 End=xB4FF Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00


Forced resources:                     None
    Boot resources:                         Logical Configuration 0
    IO Range:                  Base=xA000 End=xA00F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                     Base=xA400 End=xA40F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                     Base=xA800 End=xA80F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                     Base=xAC00 End=xAC0F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                     Base=xB000 End=xB01F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                     Base=xB400 End=xB4FF Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
   

 Filtered resources:                    Logical Configuration 0
    IRQ:                                           10 Mask: xFFFF
    IO Range:                  Base=xA000 End=xA00F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                     Base=xA400 End=xA40F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                     Base=xA800 End=xA80F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                     Base=xAC00 End=xAC0F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                     Base=xB000 End=xB01F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                     Base=xB400 End=xB4FF Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
   
Basic resources:                       Logical Configuration 0
    IRQ:                                           0 Mask: xFFFF
    IO Range:                  Base=xA000 End=xA00F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                     Base=xA400 End=xA40F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                     Base=xA800 End=xA80F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                     Base=xAC00 End=xAC0F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                     Base=xB000 End=xB01F Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00
                                     Base=xB400 End=xB4FF Min=x0000 Max=xFFFF  Alias=xFF, Decode=x00


HW Revision:                            080
    Driver:                                       SCSIAdapter\0001
    Driver Date:                               10-20-2005
    Driver:                                       viamvsd.vxd
                                                      File Size: 12822 (0x3216)
                                                      File Date: 10/20/2005 3:43 AM
                                                      Company Name: VIA Technologies, Inc.
                                                      File Version: 2.0.950.110
    Driver:                                       viamraid.mpd
                                                      File Size: 68952 (0x10D58)
                                                      File Date: 10/20/2005 3:43 AM
                                                      Company Name: VIA Technologies inc,.ltd
                                                      File Version: 2.0.950.410


so the first part should read 06114932 and its at this point im stuck i dont know what io ports to calculate the seven difference from help me plz im soo pissed off with this ms28 drive and my main comp is a laptop
oi did i hear someone laugh.... (IMG:style_emoticons/default/tongue.gif)

[uksaints]

hello would a kind soul confirm my hex should be 8086265100E400E6 many thanks.

Name   Intel® 82801FB Ultra ATA Storage Controllers - 2651   
Manufacturer   Intel   
Status   OK   
PNP Device ID   PCI\VEN_8086&DEV_2651&SUBSYS_70461462&REV_03\3&13C0B0C5&1&FA   
I/O Port   0x0000E400-0x0000E407   
I/O Port   0x0000E500-0x0000E503   
I/O Port   0x0000E600-0x0000E607   
I/O Port   0x0000E700-0x0000E703   
I/O Port   0x0000E800-0x0000E80F

[odgaf]

i can help u out a bit

8086&DEV_2651 your first 8 should be 86805126 as u can see u just reverse the numbers,  if you have made the same mistake on ur io port then just reverse them again unfortunately i cant tell you about your io ports as im on win 98 waiting for someone to help me (IMG:style_emoticons/default/tongue.gif)

[uksaints]

Thanks for helping mate, I've just found a programme called Xtreme Boot Maker which auto detects the MSINFO32 section and creates an edited mtkflash for you. I was on the right lines but the details which show after auto-detection are 80862651 E400E600.

This post has been edited by uksaints: Oct 8 2006, 10:15 AM

[KeyserSosex]

QUOTE(KeyserSozex @ Jan 4 2007, 10:52 AM)

Could someone please hexedit my mtkflash? I don't have the skills....THNX, my MB is a MSI K) with chipser nForce 570, the MB detect  ms25 but MTKFLASH not work
Nombre NVIDIA nForce 590/570/550 Serial ATA Controller
Fabricante NVIDIA Corporation
Estado OK
Id. de dispositivo PNP PCI\VEN_10DE&DEV_037F&SUBSYS_72501462&REV_A2\3&267A616A&0&28
Puerto E/S 0x0000C480-0x0000C487
Puerto E/S 0x0000C400-0x0000C403
Puerto E/S 0x0000C080-0x0000C087
Puerto E/S 0x0000C000-0x0000C003
Puerto E/S 0x0000BC00-0x0000BC0F
Dirección de memoria 0xFE9F9000-0xFE9F9FFF
Canal IRQ IRQ 22
Controlador c:\windows\system32\drivers\nvata.sys (5.10.2600.0666 built by: WinDDK, 98,38 KB (100.736 Bytes), 24/04/2006 17:52)
 
Nombre NVIDIA nForce 590/570/550 Serial ATA Controller
Fabricante NVIDIA Corporation
Estado OK
Id. de dispositivo PNP PCI\VEN_10DE&DEV_037F&SUBSYS_72501462&REV_A2\3&267A616A&0&29
Puerto E/S 0x0000B880-0x0000B887
Puerto E/S 0x0000B800-0x0000B803
Puerto E/S 0x0000B480-0x0000B487
Puerto E/S 0x0000B400-0x0000B403
Puerto E/S 0x0000B080-0x0000B08F
Dirección de memoria 0xFE9F8000-0xFE9F8FFF
Canal IRQ IRQ 23
Controlador c:\windows\system32\drivers\nvata.sys (5.10.2600.0666 built by: WinDDK, 98,38 KB (100.736 Bytes), 24/04/2006 17:52)
 
Nombre NVIDIA nForce 590/570/550 Serial ATA Controller
Fabricante NVIDIA Corporation
Estado OK
Id. de dispositivo PNP PCI\VEN_10DE&DEV_037F&SUBSYS_72501462&REV_A2\3&267A616A&0&2A
Puerto E/S 0x0000B000-0x0000B007
Puerto E/S 0x0000AC00-0x0000AC03
Puerto E/S 0x0000A880-0x0000A887
Puerto E/S 0x0000A800-0x0000A803
Puerto E/S 0x0000A480-0x0000A48F
Dirección de memoria 0xFE9F7000-0xFE9F7FFF
Canal IRQ IRQ 20
Controlador c:\windows\system32\drivers\nvata.sys (5.10.2600.0666 built by: WinDDK, 98,38 KB (100.736 Bytes), 24/04/2006 17:52)

NOBODY???

[Dizturbed]

Nevermind, got if done.

i recommend to anyone trying to flash their firmware to get textbook's guide, and follow it exactly, i have a ms28 drive and had no trouble. much respect to textbook for the guide and everyone who makes all the handy little tools.

[KeyserSosex]

QUOTE(KeyserSosex @ Jan 5 2007, 11:38 AM)

NOBODY???

N O B O D Y .....