ATI RS480 chipset with SATA showing up as channel 2 and 3 in the bios.
msinfo32 shows the following under SCSI:
Name VAX347S SCSI Controller
Manufacturer (Standard mass storage controllers)
Status OK
PNP Device ID PCI\VAX347S\0000
Driver c:\windows\system32\drivers\vax347s.sys (3.47.0.0 built by: WinDDK, 5.13 KB (5,248 bytes), 10/15/2005 4:17 PM)
Under IDE it shows this:
Name Standard Dual Channel PCI IDE Controller
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCI\VEN_1002&DEV_437A&SUBSYS_1B341019&REV_00\3&61AAA01&0&88
I/O Port 0x0000FF00-0x0000FF07
I/O Port 0x0000FE00-0x0000FE03
I/O Port 0x0000FD00-0x0000FD07
I/O Port 0x0000FC00-0x0000FC03
I/O Port 0x0000FB00-0x0000FB0F
Memory Address 0xFE02F000-0xFE02F1FF
IRQ Channel IRQ 23
Driver c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3.25 KB (3,328 bytes), 8/23/2001 1:00 PM)
Name Primary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&137C67FA&0&0
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/3/2004 10:59 PM)
Name Secondary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&137C67FA&0&1
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/3/2004 10:59 PM)
Name Standard Dual Channel PCI IDE Controller
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCI\VEN_1002&DEV_4379&SUBSYS_1B341019&REV_00\3&61AAA01&0&90
I/O Port 0x0000FA00-0x0000FA07
I/O Port 0x0000F900-0x0000F903
I/O Port 0x0000F800-0x0000F807
I/O Port 0x0000F700-0x0000F703
I/O Port 0x0000F600-0x0000F60F
Memory Address 0xFE02E000-0xFE02E1FF
IRQ Channel IRQ 22
Driver c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3.25 KB (3,328 bytes), 8/23/2001 1:00 PM)
Name Primary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&388AD848&0&0
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/3/2004 10:59 PM)
Name Secondary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&388AD848&0&1
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/3/2004 10:59 PM)
Name ATI IDE Controller
Manufacturer ATI Technologies Inc
Status OK
PNP Device ID PCI\VEN_1002&DEV_4376&SUBSYS_1B341019&REV_00\3&61AAA01&0&A1
I/O Port 0x0000F400-0x0000F40F
Driver c:\windows\system32\drivers\pciide.sys (5.1.2600.0 (XPClient.010817-1148), 3.25 KB (3,328 bytes), 8/23/2001 1:00 PM)
Name Primary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&2B330B6B&0&0
I/O Port 0x000001F0-0x000001F7
I/O Port 0x000003F6-0x000003F6
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/3/2004 10:59 PM)
Name Secondary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&2B330B6B&0&1
I/O Port 0x00000170-0x00000177
I/O Port 0x00000376-0x00000376
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/3/2004 10:59 PM)
I figured it's the ATI IDE Controller so I changed the Nforce 3 entry in mtkflash to this:
02107643F0017001
and still no luck.
Any ideas?
Thanks