i just got a pci card with a via chipset on it, since i had an old via chipset mobo, that worked fine untill i upgraded, to a nforce4 sli 32 mobo (now im buggered).
It's doing the same damm thing as the nforce4 problem, chipset never gets reconised in mtkflash so i cant pick anything, so i cant flash.
I got xtreme3.0 on there and it reconises it in windows still so i know it must be a problem with mtkflash hex values.
Normally you can find the 7's in the I/O but not with this card the differences are F's and stuff, so i used the 1st and 3rd I/O as someone suggested but still no luck, anyone got any ideas for this?
Name VIA VT6421 RAID Controller
Manufacturer VIA Technologies, Inc.
Status OK
PNP Device ID PCI\VEN_1106&DEV_3249&SUBSYS_32491106&REV_50\4&2411F011&0&3890
I/O Port 0x0000DC00-0x0000DC0F
I/O Port 0x0000D880-0x0000D88F
I/O Port 0x0000D800-0x0000D80F
I/O Port 0x0000D480-0x0000D48F
I/O Port 0x0000D400-0x0000D41F
I/O Port 0x0000D000-0x0000D0FF
I came up with this: - 0611 4932 00DC 00D8 - still no luck (IMG:
style_emoticons/default/grr.gif)
finally got it to work now using the above hex code and another hex code aswell "0611 4932 D024 B024"
Make sure everythings disconected and powered off (xbox 360 and sata cable) untill your ready to hit enter for the following command: -
also a major problem cause was the mtkflash filename i had loads mtkflash2.exe, mtkflashvia.exe etc ...
rename them all to mtkflash.exe and make sure mtkflash.typ is there too.
Use separate folders if you have more than one mtkflash file to try out.
Also make sure it's in the correct sata port.