Topic: Post Your Tested Working Burner And Media (and Mobo) (Read 2339 times)

teamskene's · « **Reply #360 on:** January 09, 2007, 10:43:00 PM »

Motherboard/PCI Card: Old dell 5100 or something mobo with VIA VT6421L SYBA card (super cheap)
xbox Drive: Hitachi 78
Burner: Pioneer 111-D firmware 1.29
Software: CloneCd @2.0-2.4x
Media: Verbatim DL+

Boy do I love my pioneer. Within 10 mins of opening it I had it installed and burning. The best part is how damn cheap it is.

Eagle_133 · « **Reply #361 on:** January 10, 2007, 12:55:00 AM »

Here ya go....

1) Abit KV-80
2) Pioneer dv109
3) Mirror dvd+r dl
4) Samsung ms-28

Splinter cell DA, cod3 & saints row wouldn't read until i reflashed with xtreme 52a (with fast read) & they all work fine now. No coasters at all out of 10 discs

jiveabillion · « **Reply #362 on:** January 10, 2007, 07:03:00 AM »

1. ) ASUS A8N5X
2. ) Lite-On SOHW-1693S
3. ) Verbatim DVD-RW DL 2.4x
4. ) DVD Decrypter
5. ) Hitachi 0078FK

MASTERXOX · « **Reply #363 on:** January 10, 2007, 06:14:00 PM »

Motherboard: SOnY VAIO
PCI CARD : Creative I/O SATA controller CARD ( VIA 6421A )
DVD Burner: Pioneer 111D (auto-bitsetting) FW# 1.23 {CAME WITH IT}
DVD Media: Verbatim 8.5GB 2.4X
PROGRAM : XBC ( Xbox Backup Creator) 2.3
XBOX 360 : MS25 FW # x52c

All games worked

Except One game : DOA EX2 { DISK read Error}

greasystab · « **Reply #364 on:** January 11, 2007, 09:06:00 PM »

Motherboard: asus a7n8x-e
PCI CARD : VIA VT6421L SYBA card
DVD Burner: Pioneer 111D
DVD Media: Fujifilm 8.5 2.4x
PROGRAM : XBC 2.3
XBOX 360: Samsung MS25

Works great.

I tried flashing with the asus a7n8x-e built in sil3114 sata controller with no luck. I also tried burning backups with an hp dvd840x, couldn't get fw to work for bitsetting/booktyping.

crazeddaffy · « **Reply #365 on:** January 11, 2007, 09:36:00 PM »

PCI Card: VIA 6421L
DVD Burner: External Compusa USB 2.0 ATAPI DVD 8x16x8x16
DVD Media: Memorex DVD+R DL 2.4x
XBOX 360: Hitachi 0078FK

or8it · « **Reply #366 on:** January 12, 2007, 09:07:00 AM »

1. Motherboard: ASUS P5B Deluxe JMicron SATA Controller (External)
2. DVD Burner: Pioneer 111D Fw 1.23
3. Xbox 360 DVD: Samsung MS25
4. Media: Verbatim DVD+R DL 8.5Gb 2.4x
5. Program: ImgBurn

Works perfect, no coasters.

This motherboard has two onboard SATA controllers. Intel ICH8 for the internal SATA ports and the JMicron Controller for the External SATA port. I used Xtreme Boot Maker to modify MTKFlash and flash my Xbox 360 using the external port. This saves the hassle of having to open your PC up to plug in the SATA port.
If you are going to use this board & method then set the JMicron SATA Controller to IDE in the BIOS and get an eSATA to SATA cable. I got a 2m one off ebay for £2. Bargin!

Happy Flashing!!

satpixels · « **Reply #367 on:** January 12, 2007, 09:35:00 AM »

1. Motherboard: VIA VT6421A SATA PCI Controller from TekGems
2. DVD Burner: NEC 3520
3. Xbox 360 DVD: Hitachi 0078FK
4. Media: Memorex 2.4 DVD+R DL
5. Program: CloneCD

rob61 · « **Reply #368 on:** January 12, 2007, 10:37:00 AM »

1. Motherboard: ASUS P5B-E
2. DVD Reader : SAMSUNG TS-H352C with KREON firmware
3. DVD Burner: HL-DT_ST GSA-H10N (Hitachi/LG)
4. Xbox 360 DVD: Toshiba
5. Media: Verbatim DVD+R DL 8.5Gb 2.4x
6. Backup software : XBox Backup Creator
7. DVD Writing Program: ImgBurn

So far I'm 4 for 4, so 100%

Let's hope it stays that way.

Charlatanefc · « **Reply #369 on:** January 13, 2007, 04:00:00 AM »

1. Motherboard: MSI KT6V-LSR onboard VIA SATA
2. DVD Reader : SAMSUNG S-D162C with KREON firmware
3. DVD Burner: NEC 4570
4. Xbox 360 DVD: Toshiba MS25
5. Media: Verbatim DVD+R DL 8.5Gb 2.4x & RiDisc 2.4x
6. Backup software : XBox Backup Creator v2.0
7. DVD Writing Program: Clone CD

Every backup has worked fine. Only problem was a TW06 where the fairways and scenery were all corrupted due to a bad read.

sncboom2k · « **Reply #370 on:** January 13, 2007, 11:06:00 AM »

1) Motherboard - N/A Using the NME 1.2
2) DVD Burner - Plextor PX-740A Firmware: 1.01 (shipped with this)
3) Media Brand: Verbatim DVD+R DL and Memorex DVD+R DL
4) Samsung with Kreon
5) Xbox 360 drive - Samsung with NME1.2 Installed by HCrip in OC.
6) Ripped with Sctrhom's patched with NME Associator & burned with Image Burn at 2.4x

All of my backups work. No coasters

Sncboom2k

Javakiko · « **Reply #371 on:** January 14, 2007, 09:36:00 AM »

Motherboard: Dell 4550

DVD Reader: Samsung SH-D162C with the KREON_V081 firmware

DVD Writer: Pioneer 111L (this was a 111D till i used the 111D_819, then 111L_819 & finally 111L_826 hacked firmwares)

Also i'm using Xbox Backup Creator Works great!!

Trance Mix · « **Reply #372 on:** January 15, 2007, 12:04:00 AM »

BENQ DVD Burner, No clue what model.

360 Drives:

Hitachi 78

TS MS25

TS MS28

Media: Memorex DVD+R DL

Burning App: IMGBurn

Mobo: A8N-SLI

ScorpioN^ · « **Reply #373 on:** January 16, 2007, 08:53:00 AM »

1. System: Macbook Pro C2D 2,17Ghz 2GB RAM
2. DVD Burner: MATSHITA DVD-R UJ-857D
3. Xbox 360 DVD: TS-943 with Xtreme 5.2a FW
4. Media: Verbatim DVD+R DL 8.5Gb 2.4x
5. DVD Writing Program: Terminal

Working like a dream. Waiting for the mac gurus here to write burning app with gui

waveydavy · « **Reply #374 on:** January 16, 2007, 09:51:00 AM »

pioneer 111d (dangerous bros 1.29)
Aone media (ricoh)
HP mobo

Author Topic: Post Your Tested Working Burner And Media (and Mobo) (Read 2339 times)