Topic: Post Your Tested Working Burner And Media (and Mobo) (Read 2339 times)

chipD · « **Reply #75 on:** June 05, 2006, 05:41:00 AM »

Intel D865GVHZ
HP 740i (stock fw)
Fujifilm 2.4x +r DL

First burn perfect.

Textbook · « **Reply #76 on:** June 05, 2006, 07:07:00 AM »

Motherboard: MSI K8T Neo-V with VIA 8237
Drive: Memorex DVD+/-DLRWL1 F16 (rebadged Lite-On SOHW 1633) (BWSE Firmware)
Media: RiData 2.4x

Everything is working perfectly, no coasters.

sniffinpoprocks · « **Reply #77 on:** June 05, 2006, 12:28:00 PM »

mobo: MSI K8N NEO4 PLATINUM nforce4 chipset
drive/fw: NEC ND 4551 with DEE's 1-X3 RPC1 mod firmware
media: Memorex 2.4x @ 2.4x burn
memory stick: Samsung Mighty Drive 1GB

working fine so far

more notes
used the memory stick package and the nforce mtk version included with no further modification.
rebooted after read and before write of drive but dont know that it was necessary, patched firmware on second pc from memstick to avoid re-config of main pc until completion.

didn't get the right disassemble tutorial; I used the complete disassembly one and had my processor heat pipes loosened before i realized i had screwed up. So for anyone else, just remove the six long torx screws, no others needed for just a firmware mod.

I also built the case release cut-outs from a plastic 50pack cd cover and they worked like a champ for releasing the rear case clips.

This post has been edited by sniffinpoprocks: Jun 5 2006, 07:35 PM

Mooner2 · « **Reply #78 on:** June 06, 2006, 04:02:00 PM »

1) Motherboard= MSI 915P Neo 2 Platinum, Intel ICH6R Chipset
2) DVD Burner= Lite-On All Write Super Combo Drive, SHM-165P6S, update fw and change booktype in DVDInfoPro.
3) Media= Memorex DVD+R DL, works great, burn at 2.4x with CloneCD.

trugamer79 · « **Reply #79 on:** June 06, 2006, 09:25:00 PM »

) Motherboard= Phoenix Optiplex 270
2) DVD Burner= BENQ DVD 1620, update fw and change booktype in DVDInfoPro.
3) Media= Verabatim DVD+R DL, works great, burn at 2.4x with CloneCD and Imgpro

sashah · « **Reply #80 on:** June 07, 2006, 09:24:00 AM »

LG GSA 4163B tested working at 1x using clone cd Latest Firmware

BenQ DW1650 tested working at 1x using clone cd Latest Firmware

Using following media

Mirror Printable DL 2.4x
Traxdata DL 2.4x
RiDisc DL 2.4x
Verbatim DL 2.4x

DaShiZNiT · « **Reply #81 on:** June 07, 2006, 06:10:00 PM »

Mobo= Asrock P4VM800
Burner= Pioneer DVR-110 Hacked Firmware to bitset all media (buffalo 1.58)
Media= Verbatim DVD+R DL @ 2.4x

all gravy over here

DeTr0iT · « **Reply #82 on:** June 08, 2006, 09:46:00 AM »

QUOTE(woo @ Jun 4 2006, 05:12 AM)

I have a Gigabyte GA-K8N Pro-SLI mobo. What SATA chipset is it? Is there anything special that I need to do?

Cheers

That mobo has nForce4 Chipset. You will need to download the MTK-NF4.zip. (flash utility needed)

mrwabam · « **Reply #83 on:** June 08, 2006, 10:54:00 AM »

Mobo: BIOSTAR TForce6100-939
Burner: NEC 16X DVD±R DVD Burner Black IDE/ATAPI Model ND-3550A
Media: Tried Phillips from microcenter no luck. Verbatim's work flawlessly.

Getting mtkflash to read see my drive was a b**ch but other than that easy as pie.

JoNike · « **Reply #84 on:** June 09, 2006, 01:07:00 AM »

1- Biostar K8NHA-PRO
2- Sony DVD-RW DW-D26A
3- Memorex DVD+R DL at 2-2.4x speed.

Smooth experience.

njgsng2004 · « **Reply #85 on:** June 09, 2006, 12:15:00 PM »

1- ASUS A8V
2- NEC ND-3550A(with hacked firmware that supports booktype)
3_ spindle of 20 verbaitims

note: COD2 works faster than normal

, and burnout's into video is somewhat choppy

blitz6speed · « **Reply #86 on:** June 09, 2006, 04:47:00 PM »

QUOTE(mrwabam @ Jun 8 2006, 05:25 PM)

Mobo: BIOSTAR TForce6100-939
Burner: NEC 16X DVD±R DVD Burner Black IDE/ATAPI Model ND-3550A
Media: Tried Phillips from microcenter no luck. Verbatim's work flawlessly.

Getting mtkflash to read see my drive was a b**ch but other than that easy as pie.

Did you have to use any certain firmware for that dvd drive or burn as is? I am trying to find specific information regarding this bitsetting and what not and not having much success. My drive is updated to the newest firmware from NEC, but not sure if thats ok or if i need a hacked firmware to burn these images. Can you let me know which you used and were successful with? Thanks.

snipetiger · « **Reply #87 on:** June 09, 2006, 09:25:00 PM »

First Setup:

1. MSI K8T NEO-FISR
2. NEC ND-2510A
3. Verbatims 2.4x DVD+R DL

Copied games fine if I modified the wxripper layout to skip the first 3 batches of sectors. Didn't like doing that so I tried the below config and it worked perfectly.

Second Setup:

1. MSI K8T NEO-FISR
2. LITE-ON SHW-160P6S
3. Verbatims 2.4x DVD+R DL

Works perfectly on every game tried (bf2, outfit, burnout, graw, perfect dark, king kong -> all backups or originals). So far it reads every sector from every disc with no errors or mods to the layout for wxripper.

xboxexpert · « **Reply #88 on:** June 09, 2006, 09:30:00 PM »

Asus P5N32SLI Watercooled to high hell
Sony DRU-810A with latest Firmware
Memorex Double Layer DVD+R DL 2.4x, 8.5gb, 240min video

Working 100%, Only had 2 bad burns and that was my idiotic fault. (IMG:style_emoticons/default/biggrin.gif)

This post has been edited by xboxexpert: Jun 10 2006, 04:31 AM

ebphondaprelude · « **Reply #89 on:** June 10, 2006, 12:41:00 PM »

1) TS DVD flash), MSI K8T Neo 64bit, Via K8T800 chipset based, VT8237,
2) Liteon SOHW 802s hacked to SOHW-832s with auto DVD-ROM booktype
3) Verbatim DVD+R DL 2.4x burned with clone cd and dvd decrypt

I dont kno if im doing it wronge but sometimes i cant seem to get the XBOX DVD to unlock using the xtreme method so i jus resort to the WXripper method and have had no problems so far
Thx

This post has been edited by ebphondaprelude: Jun 10 2006, 07:42 PM

Author Topic: Post Your Tested Working Burner And Media (and Mobo) (Read 2339 times)