Topic: Post Your Tested Working Burner And Media (and Mobo) (Read 2206 times)

XboxPlaya128 · « **Reply #30 on:** May 23, 2006, 07:43:00 PM »

My card is the link below:

http://www.newegg.com/Product/Product.asp?...N82E16815124022

These are the drivers I used:

http://www.viaarena.com/default.aspx?PageI...80&SubCatID=117

This is the edited MTKFLASH that I used:

http://rapidshare.de/files/20676748/MTKFLASHvia.zip.html

I think this is the cheapest way to get it working if you don't have a motherboard that works!

My burner is the MD-16xdvd9-8x from www.mdmm.com

This post has been edited by XboxPlaya128: May 24 2006, 02:44 AM

aznboi89x · « **Reply #31 on:** May 23, 2006, 09:14:00 PM »

motherboard= gigabyte GA-8IPE1000 onboard SATA
burner: Pioneer DVR-110D with latest firmware from offical pioneer site 1.39
media Fujifilm 2.4X

exesiv · « **Reply #32 on:** May 24, 2006, 02:04:00 PM »

motherboard: MSI K8N Neo Plat (flashes the drive great too!!! default mtkflash, use the back 2 SATA)
burner: NEC 3520A
media: Ritek Ridata Double Layer DVD+R DL White Inkjet Printable(RITEKD01)

nero2 · « **Reply #33 on:** May 24, 2006, 02:21:00 PM »

Shuttle SN25P rev2 (Nforce4 Ultra)
NEC 3540A w/ modified 1W6 firmware
Verbatim 8X +R DL media

No problems flashing using the Nforce4 version of MTKFlash on SATA channel 1.
No problems ripping using DVDinfopro/ISOBuster (at the time, the 360 drive was hooked up to SATA channel 3)
No problems burning with CloneCD. I did try the DVD Decrypter method for a couple of my rips, but I got the "invalid" image error, even though these same images worked fine when burned with CloneCD.

I've been burning @ 2.4x, though I tried one of my games @ 4x, and couldn't notice any difference. I'm burning a game @ 8x to see if the media and/or my Xbox can take it.

What speeds have everyone been burning at?

X-hacker · « **Reply #34 on:** May 24, 2006, 03:28:00 PM »

4 days of reading up on this...

1) ASROCK P4V88+ - VIA VT8237 SATA controller
2) NEC ND-4551A
3) RiDisc 8.5Gb - 2.4x

First burnt game was a coaster (first time i used DL burning on the drive)
but second and third worked a treat

Cheers
X-Hacker

macmanx · « **Reply #35 on:** May 24, 2006, 09:45:00 PM »

Motherboard: HP xw4300 workstation (945 chipset ICH7)
DVD Burner - Sony DRU-710A
Media - Verbatim DVD+RW DL - 2.4x

No problems backing up after using wxRipper and applying SS.bin. Additional note, sammy drive runs super quiet playing backups compared to originals.

ripper22 · « **Reply #36 on:** May 25, 2006, 01:02:00 AM »

1. Motherboard: ASUS P4P800 SE-X (SATA ONBOARD ICH5 Chipset)
2. DVD-Burner: BenQ 1650
3. Verbatim DVD+R DL 2.4x 8,5GB

Done with USB-flashkitV2
Game dowloaded: Tomb Raider: Legend - Xtreme Ready

Bought al this stuff yesterday. (mobo 59 euro, dvd-writer 35 euro, dvd's 29,95 euro [10])

Had lying around a p4 1,8ghz s478 and some 512 ddr, fixed it up with my old xbox1 160GB hd and installed windows on it.

Works like a charm.

Greets,
Ripper

ownagesbot · « **Reply #37 on:** May 25, 2006, 03:05:00 PM »

Sorry if this is the wrong place to post this, but i'm not sure where it belongs, i'm going to buy some media, and was just wondering, are all x360 games DL? I seem to recall PGR3 isn't, just need some confirmation

jonwoo1982 · « **Reply #38 on:** May 25, 2006, 03:52:00 PM »

Motherboard = Gigabyte GA-K8N Pro-SLI
DVD-Burner = NEC DVD_RW ND4570A
Media = Datawrite titanium

Ethan98TA · « **Reply #39 on:** May 25, 2006, 09:04:00 PM »

QUOTE(kezor @ May 18 2006, 07:21 PM)

1. Mobo = DFI LANPARTY UT nF4 SLI-DR ATX AMD Motherboard
2. Burner = NEC DVD Burner Black IDE/ATAPI Model ND-3540A
3. Media = Verbatim 20-Pack 8x DVD+R DL Double-Layer Disc Spindle

Flashed, Dumped, and Burnt Games No Problems

Can you please specify what firmware you're using?

O_oTheGameo_O · « **Reply #40 on:** May 26, 2006, 12:42:00 PM »

1. Mobo = Nforce 4
2. Burner = NEC DVD Burner 2510A FW upgraded to 2.18
3. Media = Philips double layer 2.4X 5 packers

TheRealPeppers · « **Reply #41 on:** May 26, 2006, 02:19:00 PM »

with the The Rosewill Model: Rd-162 dose not work it would seem it cannot set the booktype despite videohelp.com thinking I can bummer for me no hacked firmare ether

so anyboady with one dont bother trying it

edit:wait wait there is apperintly a hacked firmware people are calling the drive a "Rebag of Aopen 1608"

This post has been edited by TheRealPeppers: May 26 2006, 09:29 PM

Joergen · « **Reply #42 on:** May 26, 2006, 02:40:00 PM »

1. Mobo = Asus K8V SE Deluxe
2. Burner = NEC DVD Burner Black IDE/ATAPI Model ND-4571A
3. Media = Verbatim 10-Pack 2.4x DVD+R DL Double-Layer Disc Spindle Printable

All burns work, dvd speed shows clean smooth read-quality on same burner.

ORange-9mm · « **Reply #43 on:** May 26, 2006, 03:53:00 PM »

1. Intel d865perl mobo (2x onboard SATA)
2. LiteOn DVDRW SOHW-1633S
3. Verbatim DVD+R DL (up to 6x speed) Burned at 2.4x with DVDdecrypter
xp pro sp2

The d865perl board would read/write the TS firmware (using mtkflash from DOS 5 floppy) & extract the disc SS from the 360(using DVDinfopro) but the unlock command (from dvdinfopro) simply resulted in 'black cd' within isobuster. The LiteOn works w/ wxripper but the drive has to be taken apart. A paper clip in the emergency eject hole creates an eject command within the drive. The two retail DL DVDs I had to find the magic number were 'The Cat in The Hat' (Mike Myers) & 'Finding Nemo' . Patched game iso w/ ss.bin using ss merger 1.3 (1.5 is current ver.)
Burned at 2.4x using this guide`http://forums.xbox-scene.com/index.php?showtopic=514437

Don't forget to set the layer break! If your properly ripped, patched (ss.bin) & burned game does not work, you have forgotten this setting in DVD decrypter.

mobo BIOS Changes necessary to enable the 360 drive:
boot to bios & Select: advanced, drive configuration,
ATA/IDE Configuration [Legacy]
Legacy IDE Channels [SATA P0/P1, PATA Pri] (PATA enabled for IDE HD)
PCI IDE Bus Master [Enabled]
Hard Disk Pre-Delay [Disabled]
f10 save and exit

kowrip · « **Reply #44 on:** May 26, 2006, 05:51:00 PM »

Soyo Dragon 2 Motherboard (Intel 865 chipset)
NEC 3520A (1.UA hacked firmware)

DVD Decrypter (w/ layer break + booktype set to DVD-ROM)

Oblivion and Condemned worked perfectly.

Author Topic: Post Your Tested Working Burner And Media (and Mobo) (Read 2206 times)