Topic: Post Your Tested Working Burner And Media (and Mobo) (Read 2206 times)

XboxPlaya128 · « **Reply #15 on:** May 20, 2006, 10:42:00 PM »

I am using a md-16x3dvd9-8x Mad Dog Multimedia dvd burner with a Book Type setting utility that you can download from their website.

My first backup worked like a charm this is a great drive for Xbox 360 Back Up's!

Here is the link to the web site:

http://www.mdmm.com/products/optical/MegaSTORTripleInt.asp

Schnick1 · « **Reply #16 on:** May 21, 2006, 12:35:00 AM »

1. Mobo = ASUS P5AD2-E Premium
2. Burner = Plextor PX-716A
3. Media = Verbatim 20-Pack 6.5x DVD+R DL Double-Layer Disc Spindle (Burned at 2 -2.4X)

No problems at all

cerealkillajme · « **Reply #17 on:** May 21, 2006, 02:52:00 AM »

1) Mobo - Not sure, it's running a 650mhz processor, lol. Used Highpoint RocketRAID 1520 PCI card to flash, and Compusa Sil3512 PCI card for copying.

2) Drive - HP DVD Writer 640c (Lightscribe)

3) Media - Verbatim DVD+R DL burned at 2.4x.

Perfect backup of PD0.

rvdvoort · « **Reply #18 on:** May 21, 2006, 03:13:00 AM »

1) mobo: asrock K7NF2 (with hexedited mtkflash)
2) burner: nec 4550
3) media: ridata 2,4x

cafrow · « **Reply #19 on:** May 21, 2006, 08:59:00 AM »

1)mobo: Gigabyte GA 81945PL - G ( ICH7 Chipset )
2) Liteon SHW-160P6S
3)Verbatim DVD+R DL 8X 8.5GB 5 pack from Bestbuy @ 2.5X CloneCD.

This took me pretty much all day yesterday to get working, first I had to modify MTKFlash to work with the ICH7 chipset. Then I had to buy a floppy drive and some floppies. I used KDX1.5-by-F360TEAM (Thanks for the great tool guys, I probably did it wrong) but it did not work for me, I had to manually copy over the firmware Security sector to the 360 DVD drive Xtreme firmware. Once I did that I have now copied 2 games from the xbox drive to my computer and I have COD 2 running as a backup right now. This is a little tricky as a hack because of the SATA chipset support for MTKFlash but its much easier then soldering in a modchip. Does what i want it to, would only recommend this mod for people that know what they are getting into. Thanks to everyone that has created tutorials, without you I would never have gotton mine to work. Also lots of thanks to the fireware modders.

crivit · « **Reply #20 on:** May 21, 2006, 01:36:00 PM »

1) Motherboard - ASRock K7VT4A Pro (VIA8237)
2) DVD Burner - NEC ND-3570A
3) Media - Platinum 2.4x - Mediacode RICOHJPN-D00-01

deakphreak · « **Reply #21 on:** May 21, 2006, 03:04:00 PM »

1) Motherboard - A8N-SLI "Nforce4"
2) DVD Burner - NEC ND-2510A
3) Media - Verbatim

joshr799 · « **Reply #22 on:** May 21, 2006, 03:46:00 PM »

1.) Dell Optiplex its either a 160 or 170L cant remember its at work.
2.) NEC ND-3540A Firmware 1.04
3.) Verbatim DVD+R DL RW 20 Pack from Best Buy 2.4X 8.5 Gb.

These discs are RW and I didnt realize it when I bought them. Purple and Yellow label. These discs worked fine for 3 or 4 days and today I ejected a disc in the middle of a game and now they wont boot unless I get lucky. I imagine it has to be the media because it worked before. The only way I can get them to boot is to unplug the DVD drive completely and then plug it back in.

Sidewinder007z · « **Reply #23 on:** May 21, 2006, 08:31:00 PM »

1) Dell Dimension 4600 computer...(no idea about motherboard)
2) HP dvd530i (flashed with with a Sony DRU-700A bios)
3) El cheapo DYNEX 5pack DVD+DL from Best Buy.

Rip process went great.

First burn at 2.4x of Perfect Dark Zero ran great no problems.
Subsequent two discs I tried would not work at 2.4x.
Changed CloneCD to 1x burn and discs ran like a champ!

Mr. Me · « **Reply #24 on:** May 21, 2006, 09:18:00 PM »

1) Asus PRS800D-E Deluxe
2) NEC 3540A with Liggy and Dees latest firmware
3) Verbatim DVD+R DL 8.5GB 8X Branded 5pk

Burned at 8x with CloneCD, work perfect.

I tried 2.4X Fuji Film DVD+R DL first and only got one of them to boot once, it had a real hard time reading them.

xsence · « **Reply #25 on:** May 22, 2006, 08:01:00 AM »

1) Motherboard = Asus A8N-SLI Deluxe using the onboard SATA
2) Burner = Nec 3540a Firmware 1.04 (Liggy)
3) Media = Philips Dual Layer

I had some problems with non working burns but it was related to the old firmware in my burner (1.03).

This post has been edited by xsence: May 22 2006, 03:02 PM

pisshead · « **Reply #26 on:** May 22, 2006, 01:53:00 PM »

MOTHERBOARD: Landparty DFI NF4 SLI DR
DVD-RW: LITE-ON DVDRW SHW-1635S
DVD MEDIA: Verbatim Double Layer DVD+R 8.5GB

Riped and burned Fight Night perfect!

Modchipmaster · « **Reply #27 on:** May 23, 2006, 03:34:00 AM »

1. Modbo: ASRock K7VT4A Pro
2. Burner: Pioneer A109 FW 1.5
3. Media: RIDATA DVD+R DL working fine without errors. all burned at 2,4 speed

Burned:

Top Spin 2
Ridge Racer 6
Far Cry
Dead or Alive 4
PGR 3
NFS Most Wanted
Battlefield 2
Call of Duty 2
Fight Night Round 3
Ghost Recon
Madden 06

Michael

neildo · « **Reply #28 on:** May 23, 2006, 04:17:00 AM »

1. Mobo: ASRock KT7Upgrade-600
2. Burner: Sony DRU-700A
3. Media: Verbatim +R DL @ 2.4

DVDVideo used for wxRipper: Star Wars Trilogy Bonus Material disc (8.4gb TOC)

This post has been edited by neildo: May 23 2006, 11:18 AM

Nicroma · « **Reply #29 on:** May 23, 2006, 06:59:00 AM »

Mobo: Dell Dimension 9100 (intel 945 chipset, ICH7) patched mtkflasher, and HAD to set SATA to combination in the bios.
Burner: Memorex DL Model:32023292
Media: HP Dual Layer 2.4x

Works great!

This post has been edited by Nicroma: May 23 2006, 02:00 PM

Author Topic: Post Your Tested Working Burner And Media (and Mobo) (Read 2206 times)