Topic: Post Your Tested Working Burner And Media (and Mobo) (Read 2206 times)

boxxa · « **Reply #390 on:** February 07, 2007, 08:17:00 AM »

This is for my ms28 drive

1) SYBA SY-VIA-150 PCI card - $12.99 from mwave.com SKU: AA52800
2) Burner: LG GSA-H22L - I believe it was about 40 bucks from bestbuy last month
3) Media: Memorex 2.4x DL DVD+R Media, Jewel Case, 3 Pack $9.99 from Circuit City

Xtreme Bootmaker works perfect with that SYBA card and flash was flawless. Even took off the bracket to make it fit my mini tower pc

cobraxt · « **Reply #391 on:** February 08, 2007, 06:17:00 PM »

Motherboard: Asus K8NE (nForce3)
SATA: VT6421L
DVD Burner: ND-2500A flashed to NEC ND-2510A (firmware 2A5C), Pioneer DVR-111D
Media Brand: Verbatim DL DVD+R
Xbox 360 Drive: Samsung MS28 flashed with Xtreme 4.2b

works perfectly.

pnilz · « **Reply #392 on:** February 09, 2007, 02:45:00 AM »

2) TSST SH-W162C
3) Verbatim DVD+R DL burning @ 2.4x
4) Hitachi 0078FK

Evil-Ralf · « **Reply #393 on:** February 09, 2007, 04:42:00 AM »

First i didnt haved time to read all the topic

but i wana post mines that worked perfectly

Motherboard: Asrock P4VM800 Via chipset
DvD-Burner : LG Dual Layer Balck
DVD-Meida : Verbatim DVD+R DL 8.5 GB 2.4 x
XBOX 360 DVD: Hitachi LG 0078FK

Software i Used
Slax Live-CD
Maximus Tool For Hitchi Lg 0078FK
Clone CD

Games i Burned MOTO GP First Attemet
Worked Perfectly

Non Working
First i WAS trying on my Motherboard A8V-MX vith via chipset and
Confirmed after 2 days of tentatives that this board dont work on getting MOde B On your Drive
hope this helps the others to not waste time with this board(like i did)

plumbcore · « **Reply #394 on:** February 12, 2007, 11:45:00 AM »

why are people posting that DVD-R are working

this is gonna confuse people, confusion = loss of money = stress = coasters = not neccersary

put the correct thing down, stop confusing noobs like me

thanks

h16h · « **Reply #395 on:** February 12, 2007, 08:17:00 PM »

PCI Sata card : VT6421A
Xbox DVD DRIVE: MS28
MEDIA: MEMOREX DVD+ DL from Staples
BURNER: PLEXTOR
FIRMWARE: XTREME 5.2A

GUIDE: > The 100% Correct Way To Flash A Ms28, This works 100% of the time.
from XBOXEXPERT http://forums.xbox-s...howtopic=563397

Peace!

eternitykh · « **Reply #396 on:** February 13, 2007, 05:00:00 AM »

Setup 1

1) Motherboard - ECS Nforce4M-A
2) DVD Burner - SAMSUNG SH-182M
3) Media - Verbatim DVD+R DL
4) Hitachi 78 flashed with Maximus FWToolbox 3.0

Setup 2

1a) Motherboard (flashed on) - ECS Nforce4M-A
1b) Motherboard (burned on) - Abit AG8 (intel915)
2) DVD Burner - Plextor PX-751a (BenQ DW1670)
3) Media - Verbatim DVD+R DL
4) Hitachi 78 flashed with Maximus FWToolbox 3.0

Both setup successful backing up with ImgBurn v2100
Setup 1 burnt at 4x
Setup 2 burnt at 2.4x

0 coasters so far:
Dead or Alive 4
Dead or Alive Xtreme 2
Gears of War
Lost Planet
Battlestations Midway
Rainbow Six Vegas

(i forgot which was burnt with which setup, but they all work)

will also be having a 3rd setup, depending on what drive i get on that xbox, and going to attempt flashing with the abit board.
i'll post when i get another xbox.

Ogrt48 · « **Reply #397 on:** February 15, 2007, 02:12:00 AM »

Burner : Pioneer 111d fw 1.29
Media: 2.4x memorex. I burned 3 games onto these discs. The first game loaded one time and only one time. The other 2 games never will load at all, I also can't get the first game to work anymore, wtf? Open tray error and unplayable disc error when booted up with game in

2.4 Sony dual pack I found at compusa this morning. Weird media is mainly what I have to say. Advertises 2.4x burning all over it so I had just left imgburn on max write and both discs wrote at 6x for some reason, never had that happen before. Anyways both games on these discs work 100% of the time off of a cold boot. If I try to switch between the two games after playing a few hours I might have to eject once or twice to get it to boot but thats it.

8x Ridata single. The single works great. Burned at 8x and it loads up silently and just as quick as an orginal game. I have a spindle of these coming tomorrow via ups so I'll try some more on these to make sure its not just one lucky disc.

Btw, my 360 drive is the April 2006 59dj hitachi.

Ogrt48 · « **Reply #398 on:** February 16, 2007, 06:36:00 AM »

Ok, tried another 10 or so Ridata 8x dvds. All burned at 8x and they all work just like orginals. Boot and work just fine at cold boots and after the system has been on for hours. Nice and cheap too.

Fritsy · « **Reply #399 on:** February 18, 2007, 02:34:00 AM »

1) Motherboard: Jetway v600DAP (Via 8237)

2) DVD Burner: Pioneer 111d with TDB 1.29

3) Media Brand: Verbatim DL/Traxdata DL/Ridisc Xtreme DL

4) Xbox 360 Drive: Samsung ms-28 with xtreme 5.0

No problems at all with the media mentioned above. Tried Infiniti 360 DL and everyone failed on me!!! Would not get past the layer break.

Iggy_NOR · « **Reply #400 on:** February 18, 2007, 07:01:00 AM »

1) Motherboard: MSI 865 PE Neo2-V

2) DVD Burner: Pioneer 109 firmware 1.50

3) Media Brand: Verbatim DL/Ridisc DL

4) Xbox 360 Drive: Samsung ms-28 with xtreme 5.0

verbatim worked great on 2.4

ridisc however did not work on either 4x, 2,4x, 1x. The discs are of the type RICOHJPN D01 8x.

brainscan1975 · « **Reply #401 on:** February 21, 2007, 08:47:00 PM »

1) Rosewill RS 212 (VIA 6421 chipset) SATA card with a M2N-SLI Deluxe MOBO (Nforce4 sata)
2) Optiarc AD-7170A (NEC)
3) Memorex DVD+R DL
4)MS28 w/ XTREME 5.2

No coasters and no trouble as of yet.......

eternitykh · « **Reply #402 on:** February 23, 2007, 03:47:00 AM »

Ok, finally got another xbox to play around with for the third set up, also successfully flashed

1) Motherboard - Abit AG8 (intel915) with a Syba Via 150 (Via 6421A chipset) sata PCI card
2) DVD Burner - Plextor PX-751a (BenQ DW1670)
3) Media - Verbatim DVD+R DL
4) Toshiba-Samsung MS28 flashed with xtreme 5.2c with xtreme boot maker v0.3.6.14220

also no coasters

Neman · « **Reply #403 on:** February 23, 2007, 08:39:00 AM »

DVD-burner: SH-S162L
DVD-firmware: TS06
Media: XB Disc DL
DVD's burned: 8
DVD's failed: 0

TheJulianaTh20 · « **Reply #404 on:** February 24, 2007, 01:28:00 AM »

Working Burner: Philips dvd8801 crossflashed to a BenQ DW1650 and then booktyped with dvd decrypter
DVD Rom drive: TS-H943c flashed with Kreon v.81
Xbox360 drive: Hitachi v59 flashed with Maximus-Garyopa_XTRM-HITACHI_v2_3_Stealth_Rev2
Applications: Xbox Backup Creator v2.0 to create the .dvd and Clone CD to burn the .dvd
Media: Verbatim.... of coarse!

I used this tutorial:
http://www.xtreme-so...up-creator.html

It took alltogether about 45 min. and 100% successful. PGR3

Author Topic: Post Your Tested Working Burner And Media (and Mobo) (Read 2206 times)