Topic: Post Your Tested Working Burner And Media (and Mobo) (Read 2339 times)

scibot · « **Reply #330 on:** December 19, 2006, 12:57:00 AM »

Hi guys.

Mobo: ECS Elitegroup PF5 Extreme
Writer: Pioneer 111D [fw 1.23]
Media: TDK 2.4x DL+ [ RICOHJPN-D00-01 ]

First shot at burning X360 games, 100% success playing on:
Hitachi 0078FK (Maximus's 360 FW Toolbox v3.0 XTREME16 0078 V1) (IMG:style_emoticons/default/biggrin.gif)

stg58 · « **Reply #331 on:** December 20, 2006, 12:42:00 PM »

1.) Asus P4PE Mobo
2.) SY-VIA-150 RAID Sata card from Mwave ($12.99 + shipping). Downloaded and installed the 530 drivers and disabled the RAID app in MSConfig.

3.) Sh-d162c DVD-rom from Vesalia ($40.25 USD incl. shipping to US, good co. to deal with, fast ship)
4.) Benq 1620 DL DVD burner, DVD+R DL bit-set to DVD-ROM with Benq's QSuite app
5.) Verbatim 2.4x DVD+R DL from Sams club

6.) Toshiba-Samsung Ts943 ver. A (ms25. Jan '06 build) - Xtreme 5.0a modified to read ms25

-----------------------------------------

Backed up the 4 games I own using the Sh-d162c DVD-Rom and Xbox Backup Creator.
Burned 2 games at 2.4x speed and 1 at 4x speed using XBC, all 3 work 100% with no errors or open tray probs. Burned 1 with ImageBurn (as a test) @ 4x, again, zero problems. Plan on re-burning one of my games @ 8x as a test (I've always found Benq DVD burners to be very reliable).

BIG THANKS to C4e (and others) for all their work!

S.

rnenator · « **Reply #332 on:** December 21, 2006, 05:24:00 PM »

1) Abit KV8-MAX3 (the 2 VIA VT8237 onboard sata slots) (needed 1 Hard disk connected for it to find my ms28)
2) NEC 2510 or 2511 cant remember
3) verbatim double layer printable 2.4 (burning with cloneCD 100% good disks now)
4) samsung MS28, Xtreme 5.0

Big thanks to textbook for his (video) tuts and all the others for putting free work and time into this (IMG:style_emoticons/default/biggrin.gif)

This post has been edited by rnenator: Dec 22 2006, 01:25 AM

j-rad · « **Reply #333 on:** December 22, 2006, 12:55:00 PM »

ASUS A7N8X-E Deluxe Mobo
NEC 2510A DL-DVD Burner (2.F9 Firmware - MadDog OEM)
Verbatim 2.4x DVD+R DL Discs (Media Code: MKM001)

Works perfect on Sammy MS25 w/Xtreme 4.2a firmware.

Calley · « **Reply #334 on:** December 22, 2006, 03:23:00 PM »

QUOTE(Xbox360Guru @ Dec 12 2006, 11:25 AM)

I'm patiently waiting for your results. I have the exact same burner and a Hitachi 59DJ drive. When flashed with opa 2.3 stealth rev2 some of my burns which are all burned on Verbatim DVD+R DL at 4x with CloneCD won't boot. With birdy's 2.2 they all work perfectly with no extra noise out of the hitachi.

OK, I never got to reflash the drive with Birdy...I got the opportunity to buy a Pioneer 111 so I took it...
So now I am running a
Hitachi 47dj with Garyopa 2.3
Pioneer 111d with Dangerous Brothers v1.29
Clone CD and IMGBurn on Verbatim 2.4x

And I Am still making coasters.....about 45% Success Rate

Any suggestions?

Asharus · « **Reply #335 on:** December 22, 2006, 06:32:00 PM »

E1505 Dell Laptop
SONY DW-Q58A Burner
Verbatim 2.4x DVD+R DL (95310)

Samsung 5.0a

Tests OK

usenet4life · « **Reply #336 on:** December 24, 2006, 09:14:00 AM »

1) sata to usb adapter
2) nec 3540a
3) memorex dvd+r dl
4) hitachi 47dj

Millenia1x · « **Reply #337 on:** December 24, 2006, 12:08:00 PM »

will mach speed motherboards work

gimme · « **Reply #338 on:** December 28, 2006, 02:09:00 AM »

1: DELL 5150 Dimension
2: Stock Burner in above
3: Verbatim 2.4x DVD+R DL Discs
4: Samsung MS25 with 4.1a

Would not do a MS28 could see drive but never kicked in after restart of 360 so did on:
ASUS A7V600 with onboard SATA which is a VIA (Yeah!) without MTKFLASH Mod
The above was done with 10sec trick

Killed a Hitachi Drive on the above in VISTA!!!

komushi · « **Reply #339 on:** December 28, 2006, 10:12:00 AM »

1.DFI NF4 SLI INFINITY/NF4 Chipset
2.NEC ND-3540A IDE Master set booktype to dvdrom
3.RICOH DVD+R DL @2.4x
4.Samsung MS28 flashed xtreme 5.1c firmware

KingKobra1 · « **Reply #340 on:** December 29, 2006, 08:20:00 AM »

Burner-Asus DRW-1608 P3S
Media-Imation 2.4x DVD+R DL.
Firmware-Pioneer 111L.

eybara · « **Reply #341 on:** December 29, 2006, 09:15:00 AM »

Motherboard: Asus m2n32-sli Deluxe
Burner: Samsung TSSTcorp CD/DVDW SH-W163A w/ original fw no bitsetting
Media: Verbatim 2.4x Dual Layer 8.5Gb
Firmware: Maximus-Garyopa Hitachi-LG Xtreme FW v2.3 Stealth 8in1 Revision 2
Game: Dead Rising, Table Tennis, Gears of War

Works perfectly!

ben1989 · « **Reply #342 on:** December 29, 2006, 10:45:00 AM »

1.DFI NF4 SLI lanparty/NF4 Chipset
2.pioneer110D
3.INFINITI 2.4X. DUAL LAYER, 360 INKJET PRINTABLE
4.Samsung MS25 flashed xtreme 4.5b firmware

Nerdz · « **Reply #343 on:** December 29, 2006, 06:29:00 PM »

1) Abit AW8-MAX (Used Xecuter Connectivity Kit + X360USB). (Not used or tested the internal SATA...maybe internal SATA works...)
2) Plextor PX-755SA firmware 1.06. No need to change the booktype. It was already setup as DVD-ROM.
3) Verbatim DVD+R DL and Memorex DVD+R DL (both from cake boxes) burned at 2.4x using Xbox Backup Creator v2.3 Build:0185 by Redline99
4) Hitachi-LG GDR-3120L 0059DJ with Maximus-Garyopa_XTRM-HITACHI_v2_3_Stealth_Rev2

I burned my first 2 DVDs, 1 Memorex (ERAGON) and 1 Verbatim (GEARS OF WAR) and they are booting very nice and fast, without any single problem by 4 hours test now!!!

Cheers,

Cruiser
Brazil

xboxcave · « **Reply #344 on:** December 30, 2006, 09:08:00 AM »

1) MSI Ms-7046 Intel® 82801FB Ultra ATA Storage Controllers - 2651
2) Pioneer 109 w/ Official 1.58 F/W.
3) Datawrite DVD+R Dual Layer 8.5 GB 2.4x (Yellow)
4) TS-H943 - MS25 Xtreme 5.1a

Works like a dream, successfully backed up Fight Night Round 3 from my 360 Drive via SATA , just waiting for my Samsung SH-D162C to arrive for my PC

Author Topic: Post Your Tested Working Burner And Media (and Mobo) (Read 2339 times)