Topic: Jtag Saver V1.0 (Read 960 times)

Dre@m · « **Reply #30 on:** March 25, 2010, 01:20:00 PM »

plaguereign,

Source code please or PIC12f683.hex

maximilian0017 · « **Reply #31 on:** March 25, 2010, 01:25:00 PM »

Agreed

Send a couple of these "blown up" consoles to Reballers and you will quickly know where the problem lies, if the systems only work after replacing the GPU you will know the chance is there that it is the JTAG hack.

Dont hold you breath...

fritoeata · « **Reply #32 on:** March 25, 2010, 01:32:00 PM »

remove

This post has been edited by fritoeata: Mar 25 2010, 08:33 PM

HoRnEyDvL · « **Reply #33 on:** March 25, 2010, 04:11:00 PM »

QUOTE(maximilian0017 @ Mar 26 2010, 06:25 AM)

Agreed

Send a couple of these "blown up" consoles to Reballers and you will quickly know where the problem lies, if the systems only work after replacing the GPU you will know the chance is there that it is the JTAG hack.

Dont hold you breath...

HAHAHA you guys are so wrong. Blown jtag has nothing 2 do with RROD or messed up grafics. Simply u blow up your jtag port xbr or xell will no longer boot all you will get is e79, Flash original M$ nand back & console works.

I got a console in australia that has this exact same issue. any doubter in aus wants to come see it then be my guest.

I say give it afew weeks & we will see others incorporating it into there designs etc.

DMAddict · « **Reply #34 on:** March 25, 2010, 04:35:00 PM »

Excuse my ignorance on this but am I correct in assuming that attaching the diodes does nothing to prevent this then?

Piratesmustperish · « **Reply #35 on:** March 25, 2010, 05:05:00 PM »

QUOTE(plaguereign @ Mar 25 2010, 02:30 PM)

If I wanted to sell this, do you think that I wouldve posted the pic hex and schematic? People are soooooo intelligent (IMG:style_emoticons/default/jester.gif)

BTW, Use it, dont use it. Dont spam my fuckin thread. I have respect for others, have the same for me.

What he said.

Knasen · « **Reply #36 on:** March 25, 2010, 05:16:00 PM »

Interesting read... will keep an eye on this thread to see where the general consensus ends up. I've JTAGged two Xenon boxes and both are still running still fine, even after many hundred hours of gaming, still I'm a little bit worried they will die on me because of the mentioned sidefects.

AmyGrrl · « **Reply #37 on:** March 25, 2010, 05:41:00 PM »

I hope more info comes out on if this needs to be done or not... I want my Jtag'd 360 to last as long as possible... until more info comes out I was at least trying to figure out the schematic and how it would be installed to the board... the tiff image is hard to look at.... so I tried to fix it up.. but I'm pretty sure I messed up how the installation is suppose to be... can you take a look at my image and correct it and post the fixed version... oh... I was also wondering if other PIC's could be used... like a 675 or 683....

IPB Image

Lush · « **Reply #38 on:** March 25, 2010, 05:48:00 PM »

I have 3 wired and running since the inception of the JTAG hack with no problems... They include a xenon, falcon, and jasper 512... I did upgrade my xenon from the 3 x 100ohm to the diode method though when it was released...

manpee · « **Reply #39 on:** March 25, 2010, 06:04:00 PM »

i have done over 30+ jtags and not one customer has called me back

Zellcorp · « **Reply #40 on:** March 25, 2010, 06:04:00 PM »

After doing at least 30+ Jtags now on all types of boards I haven't seen this issue once so really I don't see how its helpful, Also the tiff file in the zip has nothing in it far as I can tell is this an early April Fools Joke?

slasherking823 · « **Reply #41 on:** March 25, 2010, 07:10:00 PM »

QUOTE(Zellcorp @ Mar 25 2010, 03:04 PM)

After doing at least 30+ Jtags now on all types of boards I haven't seen this issue once so really I don't see how its helpful, Also the tiff file in the zip has nothing in it far as I can tell is this an early April Fools Joke?

whoever is getting issues is still probably still using resistors
or bad soldering

I have better things to do with a pic then make a pointless circuit...

HoRnEyDvL · « **Reply #42 on:** March 25, 2010, 07:32:00 PM »

Got 3 consoles. All running Jtag saver & have no issues what so ever.

At-least i got peace of mind that after 15 sec the jtag has been shut off & dont have to worry about anything stuffing up.

My personal prefrence u wanna use it use it if not then dont. Its not like you have 2 pay for it anyways.

ddsdavey · « **Reply #43 on:** March 25, 2010, 08:17:00 PM »

Call me smug but ive never had one "die" within a week???
Plenty of screw ups yeah and a few issues with rrods returning to NEVER depart once'tagged but this is hardly a widely known issue so ill assume,for now at least,that its hardly a problem at all or at least very rare.Sounds like the only person with the issues is the geezer who made the thing lol!
All love for the scene though so rep none-the-less!
Top marks buddy.

ccfman2004 · « **Reply #44 on:** March 25, 2010, 08:40:00 PM »

I have done many JTAGs and no one has sent me a message about any problems at all. I have done Xenon, Zephyr, Falcon, and Jasper.

Author Topic: Jtag Saver V1.0 (Read 960 times)