Print

[R155]

so you tech guys is there an easy way or is it the hard scrap all the way ??

dam epoxy is rock hard got the 1st pin removed but bad uck for me the ground is covered also

has anyone used another ground point ?? or is it continue to scrap time ?

[Awoken 1]

I just use my solder iron but be careful and dont blame me if you f*** up.
You can also heat it with a hair dryer or a heat gun.

search for it there are alot of threads about it

This post has been edited by Awoken 1: Mar 9 2007, 06:06 PM

[ydgmms]

http://forums.xbox-scene.com/index.php?showtopic=589582


....read the guide. i specifically say what parts you need and where alternate points are.

[R155]

QUOTE(ydgmms @ Mar 9 2007, 05:18 PM)

http://forums.xbox-scene.com/index.php?showtopic=589582
....read the guide. i specifically say what parts you need and where alternate points are.

cheers i did on many occasions prior to the install, useful stuff ive done my own with close up pics links in the signature

infact all the info on the site is good suppose thats why were here

thanks a lot all who helped out on the journey through the internals of the 360