Topic: Nme-360 Questions And Answers Here (Read 677 times)

modarea · « **Reply #15 on:** August 14, 2006, 07:00:00 AM »

I burn with LG GSA-4163B

All backups working well

baramby · « **Reply #16 on:** August 14, 2006, 08:05:00 AM »

i got NEC DVD RW ND-3540A and Samsung drive on my XBOX 360 is backups will work with this burner and NME 360 installed ?

quicksticks · « **Reply #17 on:** August 14, 2006, 07:41:00 AM »

QUOTE(baramby @ Aug 14 2006, 09:36 AM)

i got NEC DVD RW ND-3540A and Samsung drive on my XBOX 360 is backups will work with this burner and NME 360 installed ?

I have that burner and I was using FujiFilm DVD+R DL and tried many different ways to get a working NME-patched backup on my Samsung drive without any luck. I found out that it must have been the NME-360 modchip or the way I was patching the games because when I installed the Globe-360, all of my copies that I thought were coasters, worked perfectly.

I would say this burner can definitely burn good copies, and that I was probably not patching the games correctly.

crimminal · « **Reply #18 on:** August 20, 2006, 06:23:00 PM »

I have a Sony DRU-810A and am using Memorex DVD +R burnt at 2.4x. I have an occasional issue with the game booting, but I just eject and reinsert and it usually begins working.

QUOTE(ImsPro @ Jul 30 2006, 07:28 PM)

2. Disk that boot up and display the "to play this disc please insert it into an Xbox360. I notice these disk never really spin up really fast. I've read that this error means that you have not applied the SS correctly but that it's possible your NME mod is installed correctly.

I have gotten this on a disc that I failed to place the appropriate breakpoint (which is always 1913760) into Imgburn. Once I inserted this value and reburnt, it worked fine.

xhay · « **Reply #19 on:** August 27, 2006, 06:36:00 AM »

I bought a LITE-ON just for burning my NME disks.

modarea · « **Reply #20 on:** September 06, 2006, 03:00:00 PM »

I've added more tutorials regarding the SH-D162C Samsung Drive

http://www.mod-area.com/tutorials.html

Iahova · « **Reply #21 on:** September 07, 2006, 08:45:00 AM »

Can I use this modchip to recover a hitachi 47d drive that has had a bad flash?

modarea · « **Reply #22 on:** September 07, 2006, 09:55:00 AM »

NME-360 is not able to recover from bad flash

Iahova · « **Reply #23 on:** September 07, 2006, 10:29:00 AM »

Bummer, I was hoping it would replace the existing firmware and allow the drive to function.

foundmy · « **Reply #24 on:** September 08, 2006, 02:34:00 PM »

well, if you need to recover your firmware, let me know. if you got your original firmware file we can reprogram the your mainboard of the dvd drive back to factory standards.

www.foundmy.com

grandparagon · « **Reply #25 on:** September 08, 2006, 08:15:00 PM »

I have questions that are pretty easy to answer, i think.

1) How hard is the NME360v1.1 (for the samsung) to install?
2) Where are the most indepth instructions on how to solder the NME360 to the drive? I showed someone i know who can solder pretty well the instructions i saw on modarea, but he asked if there are more detailed instructions anywhere, so i'd love to find that.
3) If i want to remove the NME-360 from the board, is that difficult? or is it the same difficulty (if not easier) than installing it?
4) I have the ms28 firmware and ill be using the hacked firmware of the SH-D162C. If i just install the modchip, there are no other big issues i need to know about, right?

I hope this isnt too many questions and i hope they are easy to answer. Thanks in advance

foundmy · « **Reply #26 on:** September 09, 2006, 01:05:00 AM »

1) easy only 4 wires. use the ALT points!

2) try the nme-360 main site as well.

3) not difficult to remove, since NO TRACES are CUT. and its only 4 points.

4) leave your original firmware on the xbox360 dvd drive and install and you are done.
and you can use the 162C for your backing up. more details at the nme-360 site.

Foundmy
North American distributor.

grandparagon · « **Reply #27 on:** September 09, 2006, 01:51:00 AM »

QUOTE(foundmy @ Sep 9 2006, 04:06 PM)

1) easy only 4 wires. use the ALT points!

2) try the nme-360 main site as well.

3) not difficult to remove, since NO TRACES are CUT. and its only 4 points.

4) leave your original firmware on the xbox360 dvd drive and install and you are done.
and you can use the 162C for your backing up. more details at the nme-360 site.

Foundmy
North American distributor.

After closer looking (at both the tutorial on modarea and the team underdog site), i have noticed that you must solder four wires from the modchip to the four points (one just to the side of the modchip, two to the right of the SST chip and one on the other side of the board). Now i have no idea if the modchip comes with the four wires already soldered, but either way, i know they need to be connected to the spots shown on the modchip.

Now is that all? does the modchip just "rest" on the board? Or I hope thats not a noobish question. And yeah, if it just rests on there, then all i need to do to remove it would be to heat up the soldering points of the four wires connected to the drive, which im sure isnt that difficult

Im sure i may need future help if i decide to get this modchip, lol. But for now, i just have one about soldering. I've asked a similar question about this elsewhere, and i got replies that it was hard and could easily damage the dvd drive and that i have to "dremel" on the dvd drive board and i have to remove the eproxy. Is that correct? Or are those replies from people who just don't like the NME and may be trying to persaude me not to get one?

Some say its easy, some say its hard. im just confused

Thanks a lot for your help so far though.

damwel · « **Reply #28 on:** September 21, 2006, 07:38:00 PM »

NME360 1.1 or NME360LE? Which is the easiest to install? What is the difference?

TheMerk · « **Reply #29 on:** September 21, 2006, 08:16:00 PM »

Well the NME 360 1.1 How I see it is really for the fewer wire counts with bug fixes. It depends which drive you have the NME-360 1.1 is out for the Hitachi and the Samsung. As for the LE is only for the Samsung.

__________________________-

But My question is that I havnt been albe to burn a suscessful backup. I have tried using the wxRipper and then converting with Xbox SS Merger 1.7b then using CloneCD to burn it. Burned using the Pioneer 111D "Fw: 1.29"

But it sounds like the laser is skipping sometimes and I have got both "Open Tray" and "Insert in a Xbox 360".

And Was burning at 2.4x

I have a Hitachi 47

Author Topic: Nme-360 Questions And Answers Here (Read 677 times)