Print

[gyrit]

QUOTE(moyhim @ Sep 22 2006, 03:25 PM)

Fot the Network point you will need to use a smaller tip, i used a 0.01mm tip and after about 5 attempts
 got a good strong clean connection.

I did not bother with the LED status because i didnt have the right torx screw lying about.

i can't seem to fins the diagrams for network shutoff and the led where did you get them

[IMI_II_IK_IE]

QUOTE(gyrit @ Nov 2 2006, 01:06 PM)

i can't seem to fins the diagrams for network shutoff and the led where did you get them

They are on the install page

Points 10 and 11 on diagram

[Djeff]

Ok i have the NME 1.1 chip and it works great !!

But what i can't figure out is why it shuts down the nic in the 360 when a backup game is insterted !!
(no problems with orignials)

any tips/tricks ?

maybe the guy who put it in connected a few to much wires... if so wich once ?

tnx in advance

[Suburban Kid]

ok, i've done everything the team underdog website over and over, step by step and all i'm getting when i put the backup in my chipped drive is "this disc is dirty".

i've tried different ways of burning it, i dont know what else to try anymore...

can anyone help me?
does it matter which burner i use if i already have used the Samsung SH-D162 drive to extract the image...

any help would be much appreciated.
thanks in advance

[ydgmms]

has anyone gotten an e64 after installing a 1.1 hitachi chip?

[nj12nets]

i did but its the installation.  mostlikely the firmware pins are either crossed or somethings messed up

[aliyevsm]

QUOTE(Suburban Kid @ Nov 14 2006, 01:15 AM)

ok, i've done everything the team underdog website over and over, step by step and all i'm getting when i put the backup in my chipped drive is "this disc is dirty".

i've tried different ways of burning it, i dont know what else to try anymore...

can anyone help me?
does it matter which burner i use if i already have used the Samsung SH-D162 drive to extract the image...

any help would be much appreciated.
thanks in advance

Hi,

I have NME-360 v1.1 with Sammy drive (ms28)
Samsung SH-D162
And Sony burner (can't remmebre from the top of my head) but any way....
Games: Dead Rising, Splinter Cell, Call of Duty 3, Gears of War
I did follow the procedure to a ste by step as well, to a difference that i did not solder 10 'n 11th wires (they are for disconnecting the nework and LED indication when chip is on)
And I backed up all my 4 games and they all work fine, I used clone CD-in fact i did not know exactly which version of the chip i have (I was noobie) and there are two different way burnig NME ready image for 1.0 and 1.1 (Img and CloneCD respectivelly)
Very first thing to check - is your originals PLAY with chip installed If they are try - different media (Memorex +RDL) worked fine - I checked (IMG:style_emoticons/default/smile.gif) and/or burner, or read bellow MASTER/SLAVE cofig.
Then I would start trouble shooting from checking the solder points (One thing to mention here, I first soldered 2nd and 1st wires to the chip itself (SST) after i removed epoxy - and none of my even originals worked, the movie DVD's however worked fine, i then cleaned very carefuly the green-ish epoxy from above the trace for alternative point 2dn and then on back of the mobo for position 1. Do not rush -  I f@cked up one mobo by rushing - it is better to cover the closest "open/exposed" traces of the processor by sticky paper/tape. As solder position very close to open traces in diagramme.
After that, it played orginals! Good!
then I did back up's as per underdog's istructions (with Schtorm extraction, and with NME assosiator converted to NME image. Do not forget you extracting as xtreme image - default in schtorm extractor sofware, right?, and then you check "Extract security sector from the image and overright the Image")
And I read it somewhere: SH-D162 should be MASTER, Burner - Slave, speed no more than 2.4x,
Media: People say Verbtrain (I did not check) , I used Memorex (+R) worked fine!!!
Very last thing would be to go to: shops buy dif kind of burenrs and truy, ones do not work return! Do not kow where you are - you know your stores better

Bottom line is NME360 works and not only with Pioneer 111D and Verbtrian media

Goodluck

[alexdp]

i have an LG burner, nme 1.1 on a samsung drive. my originals play fine. I have the gears of war release on my desktop, used the nme associator to extract the security sector, burned the image using clone cd on verbatim at 2.4 and i get the white error screen telling me to insert a xbox 360 disc???

anyone have any ideas what im doing wrong?

[doktor5000]

Im having some troubles too when trying to burn my created backups.
So would anyone be so polite to give me a hint what i'm doing wrong?
As there are many tutorials out there, i tried to check as much as possible, but still no go it seems.

What do we have here? I've got an 360 with an NME 1.1, but don't know what drive is built-in.
I've got an SDH-162C with latest Kreon fw to do the backups (was included with the xbox)
So i did my backups with Xbox Backup Creator, afterwards i extracted everything i could out of the originals, just to be sure.
Then it was suggested to patch the 'clean" image with NME Associat0r to get the SS patched in at the right place.
I burnt the resulting image using an LG- GSA4163B and Verbatim DL media, paying attetion to the Layer Break.

Is the above process wrong in general or would it result in working backups?

Anyone, please help me out a bit?

[buffmod]

I followed all the directions on team underdOgs website and it worked perfectly. But it suggests using the provided Schtrom360Xtract V3.1 for the disc extraction not Xbox Backup Creator and Then the NME aSSociat0r for the SS. Then CloneCD for the burn on verbatim dvd+rdl. Good luck!

[RahulMIB]

Hey everybody,


Just a small question/request...


Has anyone verified the NME 1.2 chip to be working properly with the Hitachi 78 drive(s) (besides the undertog team, hehe!)

Thanks!

[budlightnmyhand]

Hi,
I'm new to this and i haven't done anything yet to my 360, not even opened it up. I have one of the first xbox 360's (from moutain dew sweeps) and i know its the Hitachi drive.  Is the NME v1.2 a good mod chip for this or should i wait till the NME v1.3 comes out.  I heard there was a reason to wait for the new version, not sure why.

Where is a good reputable place to buy the mod chip from?  I don't want to order from a place thats gonna get shutdown or not ship my product.

Also will a plextor px-740a dvd burner work to burn backup copies of my games for that chip?  

Thanks for the help

This post has been edited by budlightnmyhand: Dec 11 2006, 03:01 PM

[gtiracer06]

QUOTE(RahulMIB @ Dec 10 2006, 02:54 AM)

Hey everybody,
Just a small question/request...
Has anyone verified the NME 1.2 chip to be working properly with the Hitachi 78 drive(s) (besides the undertog team, hehe!)

Thanks!

im pretty sure it hasnt been officially shipped out yet, last i saw, there was a note that said sometime in the middle of this week

[sncboom2k]

I ordered my NME 1.2 from the foundmy.com and it's been delayed twice.  It happens - not bashing them.  Poor guys just want their stock so they can make all of us whiney customers happy! hehe  So once it arrives, I'll try to find a decent install procedure and get it all hooked up.

I've been using the method on Team Underdogs website to backup my games.  I bought Verbatim DVD+R DL's from newegg with a 10.00 rebate on the 20 packs.  I also bought the Samsung DVD ROM for my computer (from ebay - got ripped - ouch).  Flashed it up with Kreon.

I've backed up all 8 of my games and am just waiting for the chip to know if it worked.


Here's the procedure in a nutshell.

1) Rip the game using Scthrom 3.1
2) Patch with NME Associater
3) Burn with Image Burn being mindful of the layer break and burn at 2.4x

Should be a winning combination.  Will report back when I have the chip installed.

Cheers
Sncboom2k

[RahulMIB]

Thanks for the replies guys, yeah, I ordered my 1.2 chip as well, couldn't wait anymore... good luck to all the early adopters of the 1.2! (including me)