Topic: Rrod 3322 After Rgh (Read 92 times)

Shintax909 · « **on:** November 10, 2011, 05:16:00 PM »

Im installing a matrix glitcher on a jasper16, and after wiring all of the points I attempted to power on, but no power. So I desoldered c3b2, and it powered on. After resoldering c3b2 it powers on but aprox. 30 seconds later I get 2 red lights opposite eachother and an S.E.C. 3322... Any ideas what could be causing this?

Shintax909 · « **Reply #1 on:** November 10, 2011, 07:12:00 PM »

Heres a pic of the rrod...

(IMG:http://i3.photobucket.com/albums/y88/leopardprincess/100_4429.jpg)

I tried to google my situation (rrod 3322 reset glitch hack, etc..) but nothing comes up...

Shintax909 · « **Reply #2 on:** November 10, 2011, 10:41:00 PM »

Desoldered and resoldered most of the points, dont know of any alternate points to try. unplugged vcc and gnd, xbox powers on normally... im stumped...

Shintax909 · « **Reply #3 on:** November 10, 2011, 11:57:00 PM »

forgot the most important part of the rgh... flashing .ecc

mods, please close this thread.

Shintax909 · « **Reply #4 on:** November 11, 2011, 12:16:00 AM »

cancel that request mods...

wrote .ecc but now box wont power on... if its not one thing its another, eh?

Shintax909 · « **Reply #5 on:** November 11, 2011, 01:10:00 AM »

Rewrote .ecc and powered on, but now it wont boot xell reloaded... i swear im having the worst luck with this hack...

Shintax909 · « **Reply #6 on:** February 03, 2020, 01:53:00 PM »

Still cant manage to get this thing into xell reloaded, tried to flash back the original nand but it wont turn on now. i could really use some expertise with this one, thanks.

Shintax909 · « **Reply #7 on:** November 17, 2011, 06:56:00 PM »

yep, flashed with jasper.jed...

soldered the points, wrote .ecc, and it wouldnt power on... checked and rechecked the points, resoldered the points... still no go... soldered on the 270pf, nothing... reflashed the original nand, and unsoldered the points, and still no power...

Shintax909 · « **Reply #8 on:** November 17, 2011, 10:12:00 PM »

@Ravendrow

is the reason why the xbox is not receiving power because its missing a dvd drive?
i bought this mobo without a drive in hopes that i can glitch it and get the keys...

Shintax909 · « **Reply #9 on:** November 17, 2011, 10:56:00 PM »

well miraculously i managed to boot the xbox, all points unsoldered and flashed nand. i suppose i could start from the very beginning, but im not confident that the outcome would be different... is there any way that i could boot xell reloaded without a drive? or with a random drive?

djexentrix · « **Reply #10 on:** November 17, 2011, 11:25:00 PM »

Jasper results are very random in my experience and I've read a lot of posts with similar issues too. Xell reloaded however should boot without a dvd drive connected. One tip I can give is when routing the wires (especially CPU_RST and PLL_BYPASS) try avoiding the coils on the motherboard as they can cause interference. Also be sure that you have a really good solder connection on PLL_BYPASS as that can also cause erratic behaviour. Even if you get erratic results you should still be able to get Xell Reloaded to boot at least once decently.

Shintax909 · « **Reply #11 on:** November 18, 2011, 04:17:00 PM »

@ djexentrix

thanks for you tips, but unfortunately in my 2nd attempt to glitch i lifted pad C3B2. im officially done with this board and will be posting it in my BST My 360 Yard Sale
thanks for all of the input guys...

ravendrow · « **Reply #12 on:** November 18, 2011, 10:33:00 PM »

dont give up!! were you using the alt point or the one by the hana...there is a fix for lifting the C3B2 pad by the hana and it is really easy

Author Topic: Rrod 3322 After Rgh (Read 92 times)