Print

[eviled]

I have a non-jtag, non-xenon, Jasper 256MB, v2.0.13599.0 dashboard. I can dump and program the nand without issue with Nand-X. All dumps are 100% match.

I was banned while connecting to live about 1 month ago for what i suspect was a bad dvd key. All i
want to do is unflag my nand so i can play offline. Currently my live profile shows up corrupt. But i can install games to the HDD and it has not corrupted any save. I test this by creating a new profile.

XVal says "Secdata is Clean".

I have read a few places that i can use a hex editor to fix this. But i can't figure out what to look
for. Here is a copy of my sectdata log. I did not have a backup of the nand before the ban. Am i SOL? Thanks.

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 3
Last filetable change: 0xA4
ECC change: 0xA4 Filetbl: 0x0D5F Secdata: 0x027E Timestamp: 33766001 2005-11-22
ECC change: 0xA3 Filetbl: 0x0D16 Secdata: 0x007A Timestamp: 33766001 2005-11-22
ECC change: 0xA0 Filetbl: 0x0B55 Secdata: 0x0072 Timestamp: 33766001 2005-11-22
ECC change: 0x9F Filetbl: 0x0B48 Secdata: 0x035A Timestamp: 33766001 2005-11-22
ECC change: 0x9A Filetbl: 0x0E30 Secdata: 0x0310 Timestamp: 33766001 2005-11-22
ECC change: 0x98 Filetbl: 0x0DCC Secdata: 0x02E8 Timestamp: 33766001 2005-11-22

Checking secdata:

Searching for recommended

Extracting secdata:
secdata027E.bin
secdata007A.bin
secdata0072.bin
secdata035A.bin
secdata0310.bin
secdata02E8.bin

Extracting filetables:
filetable0D5F.bin
filetable0D16.bin
filetable0B55.bin
filetable0B48.bin
filetable0E30.bin
filetable0DCC.bin

Creating patched secdata:
Patchedsecdata027E.bin
Patchedsecdata007A.bin
Patchedsecdata0072.bin
Patchedsecdata035A.bin
Patchedsecdata0310.bin
Patchedsecdata02E8.bin

Creating patched filetables:
Patchedfiletable0D5FBy0D5F.bin
Patchedfiletable0D5FBy0D16.bin
Patchedfiletable0D5FBy0B55.bin
Patchedfiletable0D5FBy0B48.bin
Patchedfiletable0D5FBy0E30.bin
Patchedfiletable0D5FBy0DCC.bin

Use:

Old secdata.bin not found. Console might be not banned, already patched or secdata.bin overwritten.

Press ENTER

[eviled]

BACK UP YOUR SAVES AND PROFILE BEFORE YOU DO THIS!!

I solved the issue. It wasn't a problem with the nand. It was a corrupt user profile. I tried to re-download my profile before dumping the nand but that didn't help. On the "banned" 360 and un-modded 360 my profile showed up as corrupt. On my 2nd modded 360 it worked fine. The second modded 360 is also the only box that connects to live.

I fixed it by copying my profile to a 20GB 360 HDD. You do not need to take it out of the  HDD shell for this. Used Xport360 v2.13 to view the contents of the HDD via 360 transfer cable. Copied the file Partition3:Content\E00001685ABD03FA\0001\FFFE07D1\00010000\E00001685ABD03FA to my dekstop. "E00001685ABD03FA" is the name of the file and does not have a file extension. Opened the file in Batch Con Flag Remover v0.2.4. CONSaver v1.4.8 would not see any files AT ALL. Used Batch Con Flag Remover to unflag the file. Which changed the Flagged Area from F00000084C6ACFE9 to FFFFFFFFFFFFFFFF. Opened Xport 360 again and overwrote "E00001685ABD03FA" on the HDD.

I did find "E00001685ABD03FA" in these other locations but i didn't have to update them. Maybe once you fix the main one the rest get updated.

Partition3:Content\E000010148C6ACFE\FFFE07D1\00010000\E00001685ABD03FA
Partition3:Content\E0000200482ABEC2\FFFE07D1\00010000\E00001685ABD03FA

I do not know if this means that the 360 is not banned. I won't be able to know for sure until i confirm the correct DVD key and reflash the DVD drive.