Topic: Nandpro 2.0e Having Trouble Flashing .ecc File (Read 99 times)

cckk · « **on:** October 08, 2011, 01:32:00 PM »

So I'm having trouble with NandPro 2.0e and having it write the image_00000000.ecc file that I created tom flash to my zeyphr model xbox 360.

I dumped my nand 3 times and I checked with degraded 1.1, nandcompare and even nandpro to make sure that there were no bad blocks in the dumps, and there weren't any. From there I created my image_0000000.ecc file and then tried to flash it to my 360 using the +w16 image_00000000.ecc command in nandpro and it seems to work fine untill it comes up with the error "couldn't open image_00000000.ecc for read" and then quits.

Any ideas on why this is happening and how I can fix it? Here is a picture of the output.

(IMG:http://img811.imageshack.us/img811/7775/imageqh.png)

ericksgotxbox · « **Reply #1 on:** October 08, 2011, 01:54:00 PM »

Do you have the nandpro folder at the root of your HDD?? if not, try that and let me know if it works for you

cckk · « **Reply #2 on:** October 08, 2011, 03:06:00 PM »

So i tried what you said and put my nandpro folder in the root of my HDD and no luck still the same error. (IMG:style_emoticons/default/sad.gif)

cckk · « **Reply #3 on:** October 08, 2011, 05:48:00 PM »

Never mind I got it all figured out. Thanks for the help though!

seazhou · « **Reply #4 on:** October 08, 2011, 11:00:00 PM »

is it having problems getting my programmer detected in nandpro ?

barnhilltrckn · « **Reply #5 on:** October 11, 2011, 10:04:00 PM »

I would make a bet saying he either didnt have his ecc image in the nandpro folder or he had the name of his ecc different than what he was telling nandpro it was. Lets take bets, i got 5 bucks. (IMG:style_emoticons/default/tongue.gif)

Author Topic: Nandpro 2.0e Having Trouble Flashing .ecc File (Read 99 times)