Print

[Tsukasa32]

I have a Xenon that has been j-tagged. i added on a LPT cable using the RJ45 method and it turned out ok on the first day. the next day it was working fine untill after i tried to install Dashlaunch to auto-boot Freestyle dashboard. It installed but didn't boot. By this i mean it shutdown like its supposed to but after i disconnect and let it set into the nand it just stuck on the boot up logo after power on. I still have access to Xellous using the eject button but i wanna keep the LPT just in case i get a bad flash. Any suggestions as to how to fix this would be well appreciated! Also i have unsoldered and resoldered all the connections to make sure they work, and if it makes any difrence im using a Parallel PCI connection without the optional diode installed. I have the new xenon jtag method and all the 100 ohm resistors are OnBoard not on the DB25.

[Tsukasa32]

Any type of help would be well appreciated, also if you need any more info then just ask. I would really appreciate any help you could give!

[Tsukasa32]

I just tried it without any resistors and still no go. i also reflashed using xellous but that didnt do much. xbox360 now boots fine but nandpro still wont detect. if anyone has any suggestions then im open. also i tried to short the nand and i couldn't get that down. tried for quite a bit and the short didnt help.... also ima reflash again and hope it fixes it.

[Tsukasa32]

Found out my problem after hours of searching forums, shorting my nand, desoldering and resoldering all my connections, checking my parallel port, checking my cables, and making sure nandpro is set to my pci, i have come to the conclusion of a dead SPI. Dashlaunch somehow got rid of it so ima just order in a cygnos v2 and use that . i have good enough soldering skills for one so thats what ill go with it. Admins can close this post unless they want to use this for something... i have no idea for what lol .