Topic: Finding Out If My Cb Is Exploitable (Read 127 times)

thwack · « **Reply #15 on:** August 16, 2010, 01:19:00 PM »

Your 360 won't turn on as it's got the Aud_Clamp smc, and thats the standard wiring. Move the wire+SD that goes to the ROL to the Aud_Clamp point and see if it boots.

Unknown45678 · « **Reply #16 on:** August 17, 2010, 12:08:00 PM »

Right I've reflashed my original nand, disconnected the Jtag wiring and the console still won't boot. Yet I can read and write the nand.

I just did this one command: nandpro lpt: -w16 orig.bin and I got no errors. The Casing is also grounded so I don't know what to do, Argh.

bamarquez226 · « **Reply #17 on:** August 17, 2010, 12:24:00 PM »

I've looked over your thread here, and thwack has been supportive of those trying to do the hack.

Try this, erase the NAND first before you flash the original image:

nandpro lpt: -e16

And then reflash the image. Afterwards, pull the power plug on the power supply 'till the orange light goes out, and disconnect the LPT from the PC. Power up and see what happens.

Unknown45678 · « **Reply #18 on:** August 17, 2010, 01:02:00 PM »

QUOTE(bamarquez226 @ Aug 17 2010, 07:24 PM)

I've looked over your thread here, and thwack has been supportive of those trying to do the hack.

Try this, erase the NAND first before you flash the original image:

nandpro lpt: -e16

And then reflash the image. Afterwards, pull the power plug on the power supply 'till the orange light goes out, and disconnect the LPT from the PC. Power up and see what happens.

Well nada, nothing. This box is just stuborn. I guess I'm out of options here

(goes to cry)

Thanks for the help so far.

Unknown45678 · « **Reply #19 on:** August 17, 2010, 01:53:00 PM »

Well I've given up and I'll pass it on, onto profesional hands. See you in the sales forums!

Author Topic: Finding Out If My Cb Is Exploitable (Read 127 times)