Topic: I Think I Just Kill My Jasper Cb6723 (Read 83 times)

Tander_ZA · « **Reply #15 on:** June 22, 2010, 05:53:00 AM »

How will heatgunning it, fix the box?

The problem you have has nothing to do with the solder points on the board. As others have stated - check ground points, soldering, diodes, etc.

derickchow · « **Reply #16 on:** June 22, 2010, 01:50:00 PM »

I got the same problem. I have been running xbr for a month. yesterday, I take it out, put new thermal compound for cpu and gpu, than put it back. when I power up it take 30 secs. to rrod 0022.

than I put the backup nand, resoilder all cable it still same thing.

an2ny0515 · « **Reply #17 on:** June 23, 2010, 03:00:00 AM »

i try lpt but with no luck and still have the 0022, i check all wiring it seems to be ok i look for solder splash but i dong see anything.

idefix23 · « **Reply #18 on:** June 23, 2010, 08:56:00 AM »

its possible that you got a rod while jtagging...sound like really fucked up timing...in know!

But it happened to me with one of my boxes...never say never

an2ny0515 · « **Reply #19 on:** June 23, 2010, 08:21:00 PM »

QUOTE(idefix23 @ Jun 23 2010, 03:56 PM)

its possible that you got a rod while jtagging...sound like really fucked up timing...in know!

But it happened to me with one of my boxes...never say never

did you fix your bos??? im realy starting to lose hope

idefix23 · « **Reply #20 on:** June 24, 2010, 07:17:00 AM »

i "fixed" it with a heatgun, yes.

an2ny0515 · « **Reply #21 on:** June 24, 2010, 07:45:00 PM »

QUOTE(idefix23 @ Jun 24 2010, 02:17 PM)

i "fixed" it with a heatgun, yes.

it is a jasper unit??
and what chip you use the heatgun??

an2ny0515 · « **Reply #22 on:** June 25, 2010, 12:09:00 AM »

QUOTE(idefix23 @ Jun 25 2010, 06:20 AM)

no, it was a xenon-board.

0022 error could be GPU/(H)ANA related -> 0022

maybe try to boot your xbox without the lpt cable soldered to the board.

i already try booting witjout lpt/usb wire and still it wont boot
and i got 2 of this xbox with the same problem

i will try heating it up with heat gun.

an2ny0515 · « **Reply #23 on:** June 25, 2010, 10:29:00 PM »

still no luck. i think i'm gonna wait for a while until someone fix this kind of problem

ToBbErT · « **Reply #24 on:** June 26, 2010, 11:18:00 AM »

I have also fucked up a jasper in the past. I used way to high heat to solder and ended up with the same problem as you. I think the exessive heat on the solder pads merged two tracks or something. Im not saying you damaged your board but im just sharing my expierence. And pls dont heatgun your 360 couse you dont know where the hardware error is located. And it will do more damage then good.

This is also a nice place for help irc://irc.oftc.net/free60-chat

I hope you succeed eventually

idefix23 · « **Reply #25 on:** June 26, 2010, 12:55:00 PM »

Could you make a picture of your jtag connections?

Did you guys ever soldered anything?

Author Topic: I Think I Just Kill My Jasper Cb6723 (Read 83 times)