Print

[imaphaggit]

Ok Let me tell you what I did. I have a Jasper 512mb with XBR and I have my ORIGINAL Nand backup. I followed ONyX 10 easy steps to freeboot 0.032 your Xbox. If your not familiar with the TUT. You use freeBoot Toolbox maker 2.2, then flash with Flash 360. Simple enough.

After I did that my Xbox wouldn't boot. No red rings, not E79 no audio or video, but I have power. I can boot in to XeLL.

After some research I found out that jester said that Flash 360 has a problem handling BB with freeboot and to use XeLL to flash. So I did that, and I get the same problem. I dont get any error's during the flash or anything.

So some people on another fourm told me freeboot has an issue with BB anyway and just got back to XBR.

Ok so I created an XBR image and flashed with XeLL again. Still same problem during boot but something did change. XeLL did. Instead of the normal screen I am used too. It gives me a bunch of errors and won't use the flash operation anymore.

This is what I get on my screen with "updflash.bin" on a USB stick
Here's a video of me booting with "updflash.bin" on a CDROM and then the USB.

CODE

http://vimeo.com/11658151

Heres what I typed out, this was on screen for the USB stick boot.

CODE

 * remove input
 * network init
trying to initialize network...
ok now the NIC
NETIF at 800000001c25a280
NIC reset
reset: 01805508
1478 before: 0000822e
1478: f2050000
init tx
init rx

Waiting for DHCP........192.168.0.194

starting httpd server..ok!
 * CPU PVR: xxxxxxxxx (changed from original)
 * FUSES - write them down and keep them safe
(displays fuse set correctly)
USB bus 0 device 1: vendor 0000 product 0000 class 09: USB Hub
USB bus 1 device 1: vendor 0000 product 0000 class 09: USB Hub
 * Waiting for USB...
USB: New device connected to bus 0 hub 1 port 1
USB: bus 0 device 2: vendor 0781 product 5406 class 08: Mass-Storage
 Device
probing 1 LUM(s) on device 0
LUM 0: SanDisk U3 Cruzer Micro 4.05
capacity: 4013700 secotors (1959 MB)
registered new device: uda
USB: NEw device connected to bus 1 hub 1 port 5
USB bus 1 device 2: Vendor 045E product 0291 class FF: Not Found.
fat open of /xenon.elf failed
* try booting tftp
do tftp
TFTP boot from 10.0.120.78:/tftpboot/xenon, to 8000000004000000
TFTP: no answer from server, retrying
TFTP: no answer from server, retrying
TFTP: no answer from server, retrying
TFTP: no answer from server, retrying
TFTP: no answer from server, retrying
TFTP: no answer from server, retrying
TFTP: no answer from server, retrying
TFTP: no answer from server, retrying
TFTP: no answer from server, retrying
TFTP: no answer from server, retrying
10 tries exceeded, aborting.
tftp result: -2
 * try booting from CDROM
 ! ERROR after CDB [1d], err=54.
 ! error after reading response
atapi_packet result: -6
 * reading CD/DVD...
 ! ERROR after CDB [00], err=60.
 ! error after reading response
 ! read sector failed!
 ! sense: 062900
 * UNIT ATTENTION -> just retry
 ! ERROR after CDB [00], err=20.
 ! read sector failed!
 ! sense: 023a00
 ! failed to read PVD
 * HTTP listen
 * XeLL network config: 0.0.0.0 / 0.0.0.0

Thanks in advance.

[flash360]

It looks like you have flashed back to old xell instead of xellous
That version you have now will not update from usb, sory but your gonna have to solder your lpt cable back in if you cant get it to boot to xbr

[imaphaggit]

QUOTE(flash360 @ May 11 2010, 04:11 PM)

It looks like you have flashed back to old xell instead of xellous (IMG:style_emoticons/default/sad.gif)
That version you have now will not update from usb, sory but your gonna have to solder your lpt cable back in if you cant get it to boot to xbr (IMG:style_emoticons/default/unsure.gif)

Crap. I can do it with a USB reader correct? and know where I can buy one.

Ok I downloaded XeLLous v1.0 from autoxbins. Renamed xell-2f.bin to updxell.bin

Then got this screen.

CODE

* found XeLL update. press power NOW if you don't want to update.
* flashing @1MB...
* unknown flash config 00aa3020, refuse to flash.

This post has been edited by imaphaggit: May 11 2010, 09:34 PM

[PaganOne]

Your kind of in a pickle now.  Looks like your booting the freeBOOT version of Xell, it doesn't recognize that version of xellous.  You MAY be able to do the same thing by grabbing the xell-2f.bin file from the freeBOOT 0.32 package.  Be carefull what you name the file though.  I renamed xell-2f.bin to updxell.bin and it bricked the whole thing... had to breakout the flash setup and flash from PC.  You may need to rename updslot0 or updslot1, not sure.

[carlrivest1]

I had the same problem. (Well almost cause i had e79 on nxe and xell booting) Try booting debian livecd from xell and use Xbr-Flash to flash your freeboot.bin. It worked for me i had bad blocks that only xbr-flash would see.