Topic: Christmas Lights After Jtag (Read 70 times)

xBUSBYx · « **on:** February 03, 2020, 02:10:00 AM »

Im no noob to jTagging, I have jtagged over 15 xboxs and never had a problem, until now. I just got ahold of some MS refurbs with the old blade dashboard and after flashing with xbr i keep getting christmas lights. I took the jtag wiring off and reflahed the orig.bin and the 360 wouldnt even boot, lol. So, then i flashed xell, got the cpu key and check the nand with flash tool. Its a xenon v1.0, cb 1888, it is exploitable. Im just not sure whats going wrong, never had a problem with any other ones, thanks in advance for the help.

Ive tried letting it sit after flash for way over 30 seconds so I know thats not the problem, is there any way that it could be an opus and showing as a xenon in flash tool??

This post has been edited by xBUSBYx: Yesterday, 10:14 AM

arielzadi · « **Reply #1 on:** February 03, 2020, 02:44:00 AM »

check the power supply only xenons and zyphers use 203w all the rest including opus use 175w and under

xBUSBYx · « **Reply #2 on:** February 03, 2020, 03:10:00 AM »

It didnt come with a supply, i just bought the consoles, it has the xenon plug on the MoBo so i assume its a xenon, its just weird, i havent ever had a problem like this with an xbox.

thwack · « **Reply #3 on:** February 03, 2020, 05:19:00 AM »

Sounds like it possibly might be a bad kv? Have you opened the orig. NAND dumps in Degraded to check for bad blocks?

xBUSBYx · « **Reply #4 on:** February 03, 2020, 11:56:00 AM »

Yea, I have no bad blocks, and I dont see how it could be a bad kv because its the one on the xbox and it was working before I jagged it. Im not sure what to do at this point.

DARKFiB3R · « **Reply #5 on:** March 14, 2010, 06:59:00 PM »

I've only seen Christmas tree lights when I flashed xbr + kv and config to the wrong box. I'm told Christmas tree lights are caused by a bad kv

Zeze21 · « **Reply #6 on:** March 15, 2010, 12:15:00 AM »

i had the christmas lights one time after there was absolutly nothing wrong with the box (after a simple reboot everything was back to normal) and one time when a savegame screwed up the nand of a jasper

Author Topic: Christmas Lights After Jtag (Read 70 times)