xboxscene.org forums

Pages: 1 [2]

Author Topic: Problem Running Xbr On A Zephyr  (Read 109 times)

aerofx

  • Archived User
  • Full Member
  • *
  • Posts: 115
Problem Running Xbr On A Zephyr
« Reply #15 on: February 07, 2010, 07:33:00 PM »
It seems zephyrs are just don't like XBR, mine gets e79 occasionally and resets to the initial startup.  Just sell it as an exploitable console, maybe someone will have better luck with it.
Logged

sdtrojans3

  • Archived User
  • Newbie
  • *
  • Posts: 19
Problem Running Xbr On A Zephyr
« Reply #16 on: February 17, 2010, 09:41:00 PM »
QUOTE(RRODXbox @ Feb 7 2010, 10:19 AM) *

I have a zephyr that previously ran XBR fine then just randlomly died. I have a question thou.

When you turn it on do the fans make a strange noise? IE: they keep bursting in speeds on boot up, you have to listen carefully for it thou.

Dont know how to explain it but instead of the fan noise being a constant whrrrrrr its like whrrrrbrrrrrrrrbrrrrrbrrr like a pulse in speed.

Dont know if it has anything to do with it but i just wondered if anyone elses did it. I have not tried flashing falcon or flashing it back to stock as its just a spare board really.



i have one thats a real PITA  and yes my fans do this...  its something in the programing,  i have flashed with XBR1 and 3,  same issues,  if i boot with eject button  it boots Xell  just fine and fans run a smooth normal speed,  if i boot with normal power it always codes on the screen  e74 or e79 and the fans pulse as you have described,   im stumped, but i dont know much either as this is my first jtag attempt,   i do know its a exploitable cb though because i checked,   everything is flashed properly and everything checked   it just doesnt work for some reason,  have had a chance to try 330ohm resistor  but i dont have much faith in this board anymore
Logged

death69inc

  • Archived User
  • Full Member
  • *
  • Posts: 185
Problem Running Xbr On A Zephyr
« Reply #17 on: February 23, 2010, 05:59:00 PM »
QUOTE(aerofx @ Feb 8 2010, 03:33 AM) View Post

It seems zephyrs are just don't like XBR, mine gets e79 occasionally and resets to the initial startup.  Just sell it as an exploitable console, maybe someone will have better luck with it.


I have 2 doing this
e79 and the resets so i guess its a normal picky zephr thing
Logged

sdtrojans3

  • Archived User
  • Newbie
  • *
  • Posts: 19
Problem Running Xbr On A Zephyr
« Reply #18 on: February 03, 2020, 08:21:00 PM »
haha  i said piss on mine   put it back to normal and will sell as exploitable
Logged

Yacker

  • Archived User
  • Newbie
  • *
  • Posts: 5
Problem Running Xbr On A Zephyr
« Reply #19 on: April 05, 2010, 11:23:00 AM »
Have any of you tried doing this?

"i had 3 yesterday with same issues, I took the falcon smc.bin and injected it into zephyr xbr and all 3 systems boot without E-79 issues now

might not work for you since these are cygnos v2 systems but worth a shot

nandpro falcon_xbr.bin: -r16 SMC.bin 0 1
nandpro zephyr_xbr.bin: -w16 SMC.bin 0 1

then flasher the newly modifed zephyr_xbr.bin to console, along with kv.bin, did not do config.bin as they would 3 RROD when I did that"

On a non cygnos v2 system..just flashing the normal nand?
Logged
Pages: 1 [2]
« previous next »