xboxscene.org forums

Author Topic: First Nand Dump  (Read 64 times)

Sascoo

  • Archived User
  • Newbie
  • *
  • Posts: 18
First Nand Dump
« on: January 22, 2010, 11:32:00 PM »
Hey, I am modding my first 360 and I am trying to get the Nand.  Right now I have everything soldered and I am trying to dump with nandpro.  It says testing 3 times and then says "could not detect a flash controller."  I have checked and rechecked my solders and it appears to be fine.  I never set the LPT settings in my bios because I didn't see it anywhere...

I also used 120 ohm resistors instead of 100 ohm on the LPT connection...

Any suggestions would be appreciated.

This post has been edited by Sascoo: Jan 23 2010, 07:34 AM
Logged

BIMPtacular

  • Archived User
  • Sr. Member
  • *
  • Posts: 289
First Nand Dump
« Reply #1 on: January 22, 2010, 11:35:00 PM »
remove resistors and try again.......make sure you have the diode soldered directly to the board
Logged

Sascoo

  • Archived User
  • Newbie
  • *
  • Posts: 18
First Nand Dump
« Reply #2 on: January 22, 2010, 11:46:00 PM »
I turned on the xbox and tried dumping again and now it is working.  I also wiggled the wires around a bit...
Logged

Sascoo

  • Archived User
  • Newbie
  • *
  • Posts: 18
First Nand Dump
« Reply #3 on: January 23, 2010, 09:54:00 AM »
Alright, now I am having issues with degraded1.1...
I tried to simply open the nand file and it caused the program to crash each time so I set the 1BL key to DD88AD0C9ED669E7B56794FB68563EFA and clicked valid.  I read on another forum that this would do the trick.

Now when I click "Build Downgrader Image" I get an exception "Couldn't find FS mfgbootlauncher.xex". I have looked around for some info on this but google has failed me in this instance.

Logged