Print

[BiN4RY^]

That's the rebooter

You have locked all possibilities for homebrews on your box 360 if you upgrade to a 8XXX dashboard. There won't be a new hack, and there are nothing you can do about it, End of story.

[crono999]

QUOTE(BiN4RY^ @ Dec 29 2009, 08:20 PM)

That's the rebooter

You have locked all possibilities for homebrews on your box 360 if you upgrade to a 8XXX dashboard. There won't be a new hack, and there are nothing you can do about it, End of story.

I have a real crazy idea for quite some time.

Could you solder a jtag xbox360 main board and a not hacked xbox360 main board together? (Jtag wires or something)And somehow hijack the boot from the not hacked one, whit booting them both on the same time?? So like giving a not hackeble xbox360  an exploitable cb from the hacked one.
This won’t solve the blown e-fuse, but it’s a start.
And for e-fuse, could you route it trough an other CPU witch e-fuse is not blown, also solder them together whit wire, so the 8599 xbox360 could use there’s???

And yes, I have no idea what I am talking about, just asking if it’s even possible.

[halikus]

QUOTE(crono999 @ Dec 29 2009, 02:48 PM)

I have a real crazy idea for quite some time.

Could you solder a jtag xbox360 main board and a not hacked xbox360 main board together? (Jtag wires or something)And somehow hijack the boot from the not hacked one, whit booting them both on the same time?? So like giving a not hackeble xbox360  an exploitable cb from the hacked one.
This won’t solve the blown e-fuse, but it’s a start.
And for e-fuse, could you route it trough an other CPU witch e-fuse is not blown, also solder them together whit wire, so the 8599 xbox360 could use there’s???

And yes, I have no idea what I am talking about, just asking if it’s even possible.

You have absolutely no idea how any of this works.  Absolutely none.  You have read about certain things but have no idea how they actually work.

[freeloader247]

QUOTE(crono999 @ Dec 29 2009, 12:48 PM)

I have a real crazy idea for quite some time.

Could you solder a jtag xbox360 main board and a not hacked xbox360 main board together? (Jtag wires or something)And somehow hijack the boot from the not hacked one, whit booting them both on the same time?? So like giving a not hackeble xbox360  an exploitable cb from the hacked one.
This won’t solve the blown e-fuse, but it’s a start.
And for e-fuse, could you route it trough an other CPU witch e-fuse is not blown, also solder them together whit wire, so the 8599 xbox360 could use there’s???

And yes, I have no idea what I am talking about, just asking if it’s even possible.

NO because the efuses in the non hacked consloe will not let the hack cb version run its been blocked. you can put an older firmware on any 360 but the problem is that it wont run.

[Guy Montag]

What about if you wired you updated 360 to a ps3, a wii, and maybe a DSi for good measure then boot them all?  You could also try sprinkling pixie dust on it.  I don't have a PS3 so someone else is going to have to try this for me...I don't have any pixie dust either...but I figure, my ideas are SO good I know the scene will just run with whatever I suggest and go from there.  Thanks!

[Ranger72]

QUOTE(Guy Montag @ Dec 31 2009, 04:54 PM)

What about if you wired you updated 360 to a ps3, a wii, and maybe a DSi for good measure then boot them all?  You could also try sprinkling pixie dust on it.  I don't have a PS3 so someone else is going to have to try this for me...I don't have any pixie dust either...but I figure, my ideas are SO good I know the scene will just run with whatever I suggest and go from there.  Thanks!

I have been told that this will work..... for clearing up hemorrhoids.  

[AZImmortal]

QUOTE(crono999 @ Dec 29 2009, 11:48 AM)

I have a real crazy idea for quite some time.

Could you solder a jtag xbox360 main board and a not hacked xbox360 main board together? (Jtag wires or something)And somehow hijack the boot from the not hacked one, whit booting them both on the same time?? So like giving a not hackeble xbox360  an exploitable cb from the hacked one.
This won’t solve the blown e-fuse, but it’s a start.
And for e-fuse, could you route it trough an other CPU witch e-fuse is not blown, also solder them together whit wire, so the 8599 xbox360 could use there’s???

And yes, I have no idea what I am talking about, just asking if it’s even possible.

[rocketman1981]

QUOTE(AZImmortal @ Jan 1 2010, 10:41 AM)

hey guys was wondering if anyone can help me jtag my xbox got the right dash ver, and all the kit, i know im gonna struggle with the nand, i know its not as easy as flashing a drive, im new to this forum, sorry if iv posted this msg in the wrong place. please help!!!!! been looking for someone to help me for weeks. im in the uk.  

[karak]

Anyone have any online stores that are selling new 360's that are still jtagable? I have been looking but can't tell for sure.

[Takashi]

they ship you what they ship you, there's no way to tell.

[karak]

QUOTE(Takashi @ Jan 2 2010, 06:08 AM)

they ship you what they ship you, there's no way to tell.

Shoot. Another board had a specific site that was 100% guaranteed to be older systems with older dashboard kernels, but they ran out after 1000. Two of my lan group got them but I didn't have a pay day. A ton of European sites have entire sections concerning older systems they offer. But...well that doesn't help me much:(