Topic: [tut] How To Retrive A Lost Dvd Key From Xenon Motherboard (Read 322 times)

RRODXbox · « **Reply #15 on:** August 24, 2009, 04:20:00 PM »

Ya, Tmbinc said that if you flash the NAND without doing the 3 resistors, you get E79

X-hacker · « **Reply #16 on:** August 24, 2009, 06:00:00 PM »

Ok got it. I've got the efuses read out and the CPU key.

I've inputted the CPU key in the flash tool, then tryed to open my dump but it just crashes and comes up with error reporting...

Wrong CPU key? Do I need the 1BL key?

RRODXbox · « **Reply #17 on:** August 25, 2009, 04:10:00 AM »

No you dont need the 1bl key, I saw on XBH that after a certain revision of Flash tool you no longer need it and some people have managed to get thir keys from my tut. maybe you are using an old version?

And did you take you key from lines 3 and 5 or 4 and 6, it doesnt matter which but maybe you put them in the wrong way round?

Martinchris23 · « **Reply #18 on:** August 25, 2009, 04:21:00 AM »

QUOTE(X-hacker @ Aug 25 2009, 01:00 AM)

Ok got it. I've got the efuses read out and the CPU key.

I've inputted the CPU key in the flash tool, then tryed to open my dump but it just crashes and comes up with error reporting...

Wrong CPU key? Do I need the 1BL key?

Try this.

Open the FlashTool
Click on Keys.
Enter the 2 lines from the fuses.
ok
Close the program completely.

Reopen
Select your NAND file - it should populate with DVD key and ORIG Data. If it crashes, it's possible your dump isn't good. I strongly recommend running it through Degraded v1.1 first to ensure there are no bad blocks (although it's probably too late for you unless you did multiple dumps).

duval · « **Reply #19 on:** August 26, 2009, 12:07:00 AM »

I have a spare part xbox i got with no dvd-drive, so i´ve read the orig flash with no problems, and flashed xenon-flash.bin and got the dvdkey, but when i flash the orig flash back i get and error from the xbox E71

I don´t know if the xbox already had this from the start

Is there anyway i kan get another flash to try with

The MOBO is Xenon

Meethatguy · « **Reply #20 on:** August 26, 2009, 12:39:00 AM »

QUOTE(duval @ Aug 26 2009, 02:07 AM)

I have a spare part xbox i got with no dvd-drive, so i´ve read the orig flash with no problems, and flashed xenon-flash.bin and got the dvdkey, but when i flash the orig flash back i get and error from the xbox E71

I don´t know if the xbox already had this from the start

Is there anyway i kan get another flash to try with

The MOBO is Xenon

E71 is a normal error so it may have been there before.
According to internet nerds it has somethignt o do with the ethernet port...
All it means is there is a general hardware problem or bridge in circuits.

Do the Xclamp repair, then maybe run some heat on it and some good thermal paste and you should be fine.

Man I can wait to het this hack going to revive some dvdless xboxes

suarez_suarez · « **Reply #21 on:** August 26, 2009, 11:45:00 AM »

I made the Statute to the letter, to be in two with the console turned on and connected to vga cable Munitor

pulling me this error

C:\NandPro20>NandPro.exe lpt: -r16 nand.bin
NandPro v2.0 by Tiros

Testing LPT device address:0378
Using LPT device at address:0378
FlashConfig:00012000
Starting Block:0x000000
Ending Block:0x0003FF
Press any key to begin reading nand
Error: 0 reading block 0
Error: 0 reading block 1
Error: 0 reading block 2
Error: 0 reading block 3
Error: 0 reading block 4
Error: 0 reading block 5
Error: 0 reading block 6
Error: 0 reading block 7
Error: 0 reading block 8
Error: 0 reading block 9
Error: 0 reading block A
Error: 0 reading block B
Error: 0 reading block C
Error: 0 reading block D
Error: 0 reading block E
Error: 0 reading block F
Error: 0 reading block 10
Error: 0 reading block 11
Error: 0 reading block 12
Error: 0 reading block 13
Error: 0 reading block 14
Error: 0 reading block 15
Error: 0 reading block 16
Error: 0 reading block 17
Error: 0 reading block 18
Error: 0 reading block 19
Error: 0 reading block 1A
Error: 0 reading block 1B
Error: 0 reading block 1C
Error: 0 reading block 1D
Error: 0 reading block 1E
Error: 0 reading block 1F
Error: 0 reading block 20
Error: 0 reading block 21
Error: 0 reading block 22
Error: 0 reading block 23
Error: 0 reading block 24
Error: 0 reading block 25
Error: 0 reading block 26
Error: 0 reading block 27
Error: 0 reading block 28
Error: 0 reading block 29
Error: 0 reading block 2A
Error: 0 reading block 2B
Error: 0 reading block 2C
Error: 0 reading block 2D
Error: 0 reading block 2E
Error: 0 reading block 2F
Error: 0 reading block 30
Error: 0 reading block 31
Error: 0 reading block 32
Error: 0 reading block 33
Error: 0 reading block 34
Error: 0 reading block 35
Error: 0 reading block 36
Error: 0 reading block 37
Error: 0 reading block 38
Error: 0 reading block 39
Error: 0 reading block 3A
Error: 0 reading block 3B
Error: 0 reading block 3C
Error: 0 reading block 3D
Error: 0 reading block 3E
Error: 0 reading block 3F
Error: 0 reading block 40
Error: 0 reading block 41
Error: 0 reading block 42
Error: 0 reading block 43
Error: 0 reading block 44
Error: 0 reading block 45
Error: 0 reading block 46
Error: 0 reading block 47
Error: 0 reading block 48
Error: 0 reading block 49
Error: 0 reading block 4A
Error: 0 reading block 4B
Error: 0 reading block 4C
Error: 0 reading block 4D
Error: 0 reading block 4E
Error: 0 reading block 4F
Error: 0 reading block 50
Error: 0 reading block 51
Error: 0 reading block 52
0053

I can also be failing to

be said: the xbox is still on but no video and the fans off

reddwarf · « **Reply #22 on:** August 26, 2009, 12:58:00 PM »

Do you have the diode installed on pin 11, also try reducing the cable length for the parallel port

suarez_suarez · « **Reply #23 on:** August 26, 2009, 01:01:00 PM »

QUOTE(reddwarf @ Aug 26 2009, 01:58 PM)

Do you have the diode installed on pin 11, also try reducing the cable length for the parallel port

I have installed the diode 11 are other pruebaa elpin, see what happens cut the cable

hazy4days · « **Reply #24 on:** August 26, 2009, 08:21:00 PM »

can this help me out with my problem? my pcb board on the drive is not the one for the 360? Do i need any cables and such?

reddwarf · « **Reply #25 on:** August 26, 2009, 10:35:00 PM »

QUOTE(suarez_suarez @ Aug 26 2009, 12:01 PM)

I have installed the diode 11 are other pruebaa elpin, see what happens cut the cable

Yep let us know!!!!

QUOTE(hazy4days @ Aug 26 2009, 07:21 PM)

can this help me out with my problem? my pcb board on the drive is not the one for the 360? Do i need any cables and such?

Yes you can recover the DVD from the motherboard once you have the nand dump and the cpu key, use 360 flash dumper to decode the dvd key, it'll even tell you what type of DVD drive is married to the system!!

hazy4days · « **Reply #26 on:** August 27, 2009, 06:00:00 AM »

QUOTE(reddwarf @ Aug 27 2009, 12:35 AM)

Yep let us know!!!!
Yes you can recover the DVD from the motherboard once you have the nand dump and the cpu key, use 360 flash dumper to decode the dvd key, it'll even tell you what type of DVD drive is married to the system!!

So wat cable do i need to do this?

majinsoftware · « **Reply #27 on:** August 27, 2009, 06:02:00 AM »

Jtag hack and lpt nand dump cable. Go back to General Technical Hacking Discussion its all covered in there.

hazy4days · « **Reply #28 on:** August 27, 2009, 08:10:00 PM »

QUOTE(majinsoftware @ Aug 27 2009, 08:02 AM)

Jtag hack and lpt nand dump cable. Go back to General Technical Hacking Discussion its all covered in there.

Can u give me a link bcuz i cant find it anywere

majinsoftware · « **Reply #29 on:** August 27, 2009, 09:51:00 PM »

OMG, If you cant find this then you shouldnt even be plugging a xbox into the tv/power let alone opening it and modding it. God some people can be super stupid or super lazy.

http://forums.xbox-scene.com/index.php?showtopic=690493

Author Topic: [tut] How To Retrive A Lost Dvd Key From Xenon Motherboard (Read 322 times)