Topic: [tut] How To Retrive A Lost Dvd Key From Xenon Motherboard (Read 322 times)

fiveten · « **Reply #45 on:** November 16, 2009, 10:30:00 AM »

Thanks for the tut RRODXbox, learned a lot. I have a xenon with 8507 kernel. Because of your breakthrough I am hopeful on getting my key some day!

fiveten

wmomo · « **Reply #46 on:** November 16, 2009, 12:01:00 PM »

I can read you need the VGA cable for this. Isn't it possible with the RCA one? If not, would it be possible to do this without using the screen (like output the info we want on a file?)

Thanks!

bar807 · « **Reply #47 on:** November 19, 2009, 12:54:00 PM »

Hi,

I have followed this tutorial for a zephyr mainboard and all went well. Xell booted up and got my key. But as I flashed back the original nand I'm getting RROD. I've tried several times, taking off power after flashing but still no luck. Thing is that I just have 1 dump so maybe that was a bad dumb. Later I tried on a new Elite with jasper which I accidentaly lost the key, with kernel 7636 (if im not mistaken). Read original nand 6 times with no errors, tried to boot up xell (jasper hacked 16mb version) and it didnt boot, probably the kernel is not exploitable. Then i reflashed the original nand and got RROD also on this one. I tried all the 6 dumps and still no luck. Took all day. Any suggestions please?

BLKro · « **Reply #48 on:** November 28, 2009, 06:45:00 AM »

I am currently having the same problem. Have 4 reads, all done with no errors, all identical. Flashed Xell, got CPU key, got the DVD key. Now I flashed the NAND backup and got E79 (the console is almost unused as the owner tried to mod it himself and erased before reading the key). Do I have to erase before writing the NAND back? Do I have to write with nandpro using w or W?

bar807 did you try erasing before writing back the original NAND?

hawkeye06 · « **Reply #49 on:** November 30, 2009, 04:51:00 PM »

I just did this over the weekend! Thank you so much for this!! It's probably the coolest hack I've ever done!

scobie21 · « **Reply #50 on:** December 01, 2009, 05:05:00 AM »

Hi great guide I managed to get my dvd key but when I flash the original nand dump back all I get now is 2 alternating red leds jumping from bottom 2 to top 2?. Theres no video output just black screen with the leds jumping from top to bottom
I dumped the nand 3 times and compared them using infectus tools with no errors.

Anybody got any ideas ??.

Thanks again

BLKro · « **Reply #51 on:** December 01, 2009, 12:00:00 PM »

Compared using infectus tools? Could you detail that method? Did you try comparing with "fc" command in DOS, or with Total Commander "Compare by content" option?

How many times did you write the flash back to the console? Did you try an erase command before writing?

I was able to solve the problem mentioned 2 posts above by erasing and writing again. Don't know if the problem was that I did not erase first, or maybe due to a bad writing. All is good, key injected in DVD and all is working fine and dandy

Thanks everyone for the tutorials and help!

chrisdot · « **Reply #52 on:** December 01, 2009, 01:29:00 PM »

Is Xell the same as xenon_ha&k.bin? spent ages tryin to sort this and ive got as far as reading nand and tryin to flashj xenon bin file but it wont boot up at all 3 red lights!!!!!

360player · « **Reply #53 on:** December 06, 2009, 04:50:00 PM »

I have a good falcon board with kernal 7371 that somebody swapped in a samsung drive and lost the key,
Will this method work on this board? I think there might have been some program updates in the past week?..
I just gave away 3 xbox's this last month that would have been great for this all worked just had lost dvd keys.
Damn.

Bukmop · « **Reply #54 on:** December 07, 2009, 10:40:00 AM »

QUOTE

Will this method work on this board?

Of course, it works! Recently I retrieved the lost key of Falcon MB.

moreniu · « **Reply #55 on:** December 07, 2009, 08:45:00 PM »

Does this method works for 512mb jaspers (june 09) boards?

Braaap17 · « **Reply #56 on:** December 20, 2009, 06:50:00 PM »

Is there a way to do this without VGA cable?

I have the NAND all wired to LPT and JTAG hack soldered but have NOT done anything else yet.

Anyone know i dont want to go ahead yet to screw something up.
thanks

Uppercut-Master · « **Reply #57 on:** January 15, 2010, 04:04:00 PM »

Form where I can download Xenon_hack.bin

Uppercut-Master · « **Reply #58 on:** January 15, 2010, 11:35:00 PM »

I found it
thank's for the tutorial.

dazzawul · « **Reply #59 on:** January 19, 2010, 12:48:00 AM »

QUOTE(Braaap17 @ Dec 21 2009, 12:50 PM)

Is there a way to do this without VGA cable?

I have the NAND all wired to LPT and JTAG hack soldered but have NOT done anything else yet.

Anyone know i dont want to go ahead yet to screw something up.
thanks

You don't need the VGA cable, you can use the normal cable and go composite.

But, IT'S FUCKIN' HARD TO READ!

0's look like 8's

Author Topic: [tut] How To Retrive A Lost Dvd Key From Xenon Motherboard (Read 322 times)