Topic: Xenon Diagram For Lpt Flashing (Read 1390 times)

luckycool · « **Reply #495 on:** March 03, 2010, 04:10:00 PM »

hi
i have read 16 mb nand from xbox360 and write xenon_hack.bin..
using command

NandPro lpt: -r16 nand.bin

NandPro lpt: -w16 xenon_hack.bin

my two orginal backups and xenon_hack.bin had the same size .. so i carried on writing the hacked bin..

thanx

luckycool · « **Reply #496 on:** March 03, 2010, 04:23:00 PM »

QUOTE(thwack @ Mar 3 2010, 05:44 PM)

You've got multiple bad blocks in your NAND

And by the looks of the other piccies you sent me, they're not reallocated to the end of the NAND.

You'll need to rebuild your NAND from scratch - have you ust flashed Xell over, or have you written over the entire NAND on the 360? If you have written over the entire NAND you're going to have to find a donor KV with CPU key to repair.

If you haven't written over the lot, then use Louuky's Xellous tut to repair.

i cant find louuky's xellous tut.. pls guide me thanx

cRaCKwHoRe · « **Reply #497 on:** March 04, 2010, 05:45:00 AM »

QUOTE(luckycool @ Mar 4 2010, 12:23 AM)

i cant find louuky's xellous tut.. pls guide me thanx

Well it took me about 2 seconds to get it... look next time

http://forums.xbox-s...howtopic=703757

luckycool · « **Reply #498 on:** March 04, 2010, 08:33:00 AM »

QUOTE(cRaCKwHoRe @ Mar 4 2010, 12:45 PM)

Well it took me about 2 seconds to get it... look next time

http://forums.xbox-s...howtopic=703757

Thanks for point me in this direction mate.i think i have a little bit more problem..i have made a backup which wasnt valid .. and then i write xeon_hack.bin now i need to write valid nand so i can make my xbox360 work again..

luckycool · « **Reply #499 on:** March 04, 2010, 09:18:00 AM »

QUOTE(thwack @ Mar 3 2010, 05:44 PM)

If you have written over the entire NAND you're going to have to find a donor KV with CPU key to repair.

i cant get this in my head mate .. is there any instruction for this ?

cRaCKwHoRe · « **Reply #500 on:** March 04, 2010, 10:28:00 AM »

Let me get this right- you made a backup of your NAND, found that it wasn't valid, and then proceeded to flash over your current NAND anyway? ... And now it doesn't work so you want to restore from, oh wait, no backup?

Sorry, I don't mean to bash you but c'mon, use your head. Always have a backup. Now you're sorely out of luck unless you can find someone willing to give you a dump of their NAND that is from a matching model (Xenon, Falcon, etc) as well as matching CB. Do you know what your CB was?

luckycool · « **Reply #501 on:** March 04, 2010, 11:40:00 AM »

QUOTE(cRaCKwHoRe @ Mar 4 2010, 05:28 PM)

Let me get this right- you made a backup of your NAND, found that it wasn't valid, and then proceeded to flash over your current NAND anyway? ... And now it doesn't work so you want to restore from, oh wait, no backup?

Sorry, I don't mean to bash you but c'mon, use your head. Always have a backup. Now you're sorely out of luck unless you can find someone willing to give you a dump of their NAND that is from a matching model (Xenon, Falcon, etc) as well as matching CB. Do you know what your CB was?

Yeam man lols what do you expect from a noobie.....

i did make a blunder ..i dint use degraded to check if my back was valid..any way my CB version is 1903 LDV0 i read it from degraded..

i checked the size of my readed nand with two dumps my mistake should have checked with degraded..now i got to read from a different xboxb 360 right

well i m not giving up i got few broken xbobxes will try my luck with them

cheers

jc33777 · « **Reply #502 on:** April 13, 2010, 12:43:00 PM »

I've been reading alot on this and got really excited to be able to get my hdd functions back then i thought wait my computers dont have lpt port

what are my options now? i just want to be able to install games on my hdd again.

Sindyrello · « **Reply #503 on:** September 07, 2010, 01:15:00 PM »

Hi! Guys need help i need drivers for Win7 64bit !
Any help pls!

oztony · « **Reply #504 on:** May 14, 2011, 09:26:00 PM »

Ok the nand on my jtagged Xeon xbox has become corrupt.I didnt do the Jtagg install but it was working fine till the Kids did a game update.When trying to write Xell using the LPT port method I get these errors for all 50 blocks

NandPro v2.0b by Tiros

Testing LPT device address:0378
FlashConfig:21221421
Using LPT device at address:0378
Starting Block:0x000000
Ending Block:0x0003FF
Writing
File: Xell.bin FileLen:14a000 Blocks:50
Error:FFFFFFFE Programming block 0
Error:FFFFFFFE Programming block 1
Error:FFFFFFFE Programming block 2
Error:FFFFFFFE Programming block 3
Error:FFFFFFFE Programming block 4
Error:FFFFFFFE Programming block 5
Error:FFFFFFFE Programming block 6
Error:FFFFFFFE Programming block 7
Error:FFFFFFFE Programming block 8
Error:FFFFFFFE Programming block 9
Error:FFFFFFFE Programming block A

I have the original nand but not the cpu key just a couple of quick questions im using this guide here
How to do the JTAG Hack/Dump NAND/Xell - Se7enSins Forums http://www.se7ensins...kdump-nandxell/

But this guide here shows 3 330 ohm resistors

Do in need the 330 ohm resistors? also on my m/ board J2D2 4 and 7 has a resistor not a jumper wire do I need to bridge out the resistor? Note had to install diode to recognize flash controller and remove 100 ohm resistors.

Any help would be appreciated

Thanks Tony

oztony · « **Reply #505 on:** May 15, 2011, 07:48:00 PM »

Yes efuse protection before hand do I need those 330 ohm resistors?

Cheers Tony

redm1 · « **Reply #506 on:** October 03, 2011, 10:55:00 AM »

when i was extrating a dm28 male connector from a cord i had laying around one of the tins on the back of the male came off which raised a question for me can i rip off those back "spoke" things if they are not going to be used???

Author Topic: Xenon Diagram For Lpt Flashing (Read 1390 times)