Print

[hassle]

IM running vista 32 bit and i successfully flashed a sammy ms28 yesterday with this same system.

This is the steps i took to falshing my liteon drive:
-i built my own extractor
-i ran everything just fine
-did half tray open thing
-extraced the dummy, identify, inquiry, key
-made lite_cfw.bin
*****now this is where it started to mess up*********
-tried to erase the drive and i never got 0x72 but it said drive was in vendor mode.
-then i kept getting errors: (heres the log file) (All the XXXXXXXXXXXXXXXXX are my drive key just covered up)

-------------------------------------------------------------------------------------------------------



 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~

JungleFlasher 0.1.51 Beta

Session Started Tue Mar 31 18:06:37 2009




This is a 32 bit process running on a 32 bit CPU

Found 4 I/O Ports.

Found 1 Com Ports.

Found 2 windows drives.

Found 2 CD/DVD drives.



Sending DVDKey request to I/O port 0x1420 and COM1



................ Serial Data looks ok,  key returned: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

................ Serial Data looks ok,  key returned: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

................ Serial Data looks ok,  key returned: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

................ Serial Data looks ok,  key returned: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

................ Serial Data looks ok,  key returned: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

................ Serial Data looks ok,  key returned: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX



Extracted drive key matched 6 times.

Key data saved to C:\Users\Kernel\Documents\liteon\Key.bin



0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS    

0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S        

0020: 37 34 38 35 30 43 41 30 - 41 31 44 36 30 38 43 47 74850CA0A1D608CG

0030: 38 31 33 38 31 30 30 31 - 37 33 31 20 20 20 00 00 81381001731   ..

0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................



Inquiry String saved to C:\Users\kernel\Documents\liteon\Inquiry.bin



0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0010: 00 00 00 00 44 36 30 38 - 43 47 38 31 33 38 31 30 ....D608CG813810

0020: 30 31 37 33 31 20 20 20 - 00 00 00 00 00 00 34 37 01731   ......47

0030: 35 38 43 30 20 20 4C 50 - 53 44 20 20 20 20 47 44 58C0  LPSD    GD

0040: 31 2D 44 36 53 32 20 20 - 20 20 20 20 20 20 20 20 1-D6S2          

0050: 20 20 20 20 20 20 20 20 - 20 20 20 20 20 20 00 00               ..

0060: 00 00 00 0B 00 00 00 04 - 00 02 06 00 00 00 00 00 ................

0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0080: 03 00 78 00 78 00 E3 00 - 78 00 00 00 00 00 00 00 ..x.x...x.......

0090: 00 00 00 00 00 00 00 00 - 02 02 00 00 68 00 00 00 ............h...

00A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

00B0: 20 20 00 00                                         ..            



Identify String saved to C:\Users\kernel\Documents\liteon\Identify.bin



0000: 44 36 30 38 43 47 38 31 - 33 38 31 30 30 31 37 33 D608CG8138100173

0010: 31 20 20 20 FF FF FF FF - 38 43 31 37 30 39 33 32 1   ....8C170932

0020: 31 37 44 36 31 34 58 58 - 41 30 FF FF 53 34 50 38 17D614XXA0..S4P8

0030: 33 32 35 30 30 30 30 30 - 30 35 37 36 35 34 00 00 32500000057654..

0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 31 FF FF ............A1..





Dummy.bin file saved to C:\Users\kernel\Documents\liteon\Dummy.bin



Loading DVDkey source file

Inquiry string found

Identify string found

DVD key found @ 0xA030 key is XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Firmware is a Lite-On Dummy OSIG: PLDS    DG-16D2S        7485

Firmware type is: DVDKey32 extract                



Auto-Loading target file c:\Users\kernel\Documents\iXtreme 1.51+ JungleFlasher 0.1.51 Beta ALL Versions\JungleFlasher.0.1.51.Beta\JungleFlasher v0.1.51 Beta\firmware\ix151-liteon.bin

Target File MD5 hash is:  933ed9c64d5839c69628059fc1e2806d

Genuine Lite-On iXtreme 1.51

Inquiry area found

Current DVD key is 55AA55AA55AA55AA55AA55AA55AA55AA

Firmware is a Lite-On encrypted iXtreme OSIG: PLDS    DG-16D2S        7485

Firmware type is: iXtreme v1.51-12X

DVD Key copied to target

Inquiry string copied from Source to Target

Identify string copied from Source to Target

Serial strings copied from Source to Target



Target f/w saved as: C:\Users\kernel\Documents\liteon\Lite_CFW.bin



Sending Lite-On-Erase request to port 0x1420

Drive returned Status 0xD0

........................................

Device Intro failed!



Sending Lite-On-Erase request to port 0x1420

Drive returned Status 0x80

.......

Serial flash found with Status 0x72

Sending Vendor Outro to port 0x1420

Manufacturer ID: 0x90

Device ID: 0x90

Flash Name:  Unknown type

Flash Size:  n/a



Getting Status from port 0x1420

Invalid Status



Getting Status from port 0x1420

Invalid Status



Sending Lite-On-Erase request to port 0x1420

Drive returned Status 0x80

........................................

Device Intro failed!



Getting Status from port 0x1420

Invalid Status

Sending Vendor Intro to port 0x1420

Status 0x80

Re-sending Vendor Intro:

......................................

Device Intro failed!



Sending Lite-On-Erase request to port 0x1420

Drive returned Status 0x80

........................................

Device Intro failed!



Sending Lite-On-Erase request to port 0x1420

Drive returned Status 0x80

........................................

Device Intro failed!



Sending Lite-On-Erase request to port 0x1420

Drive returned Status 0x80

........................................

Device Intro failed!

Sending Vendor Intro to port 0x1420

Status 0x80

Re-sending Vendor Intro:

......................................

Device Intro failed!



Getting Status from port 0x1420

Invalid Status



Sending Lite-On-Erase request to port 0x1420

Drive returned Status 0x80

........................................

Device Intro failed!

Sending Vendor Intro to port 0x1420

Status 0x80

Re-sending Vendor Intro:

......................................

Device Intro failed!



Sending Lite-On-Erase request to port 0x1420

Drive returned Status 0x80

........................................

Device Intro failed!

---------------------------------------------------------------------------------------------------------


And now when I try to just use the drive i only get the blinking middle light and the drive does nothing. wont eject or anything!!!

What have i done?

This post has been edited by hassle: Apr 1 2009, 04:46 AM

[hassle]

This is the tutorial i used to make the xtracotr

http://img27.imageshack.us/my.php?image=ch...eyextractor.jpg

This post has been edited by hassle: Apr 1 2009, 05:50 AM

[ncaaplayer4]

Your extractor worked. All you got to do is take your frimware you made in Jf (  lite_cfw.bin )
and flash it in Iprep or dosflasher.

 All the extractor does is extraced the identify, inquiry, key, and dummy.
Make sure this is not the key 55AA55AA55AA55AA55AA55AA55AA55AA you flash in your drive.
You can check the key in JF.

JF is JungleFlasher.

[hassle]

okay so i have the key but now i need to use iprep or dosflasher. got ya. and 55aa55aa55aa55aa55aa55aa55aa isnt the key i falshed to my drive, it was my actual key.

thank you for responding. i will come back with results.

If I have the lit_cfw.bin alredy then can i just skip the reading and go straight to the flash? just put the firmware in the root or what?

Im sorry if i sound nooby. Ive been out of the game or a very long time.

This post has been edited by hassle: Apr 1 2009, 07:18 AM

[turny]

QUOTE(ncaaplayer4 @ Apr 1 2009, 07:05 AM)

Your extractor worked. All you got to do is take your frimware you made in Jf (  lite_cfw.bin )
and flash it in Iprep or dosflasher.

 All the extractor does is extraced the identify, inquiry, key, and dummy.
Make sure this is not the key 55AA55AA55AA55AA55AA55AA55AA55AA you flash in your drive.
You can check the key in JF.

JF is JungleFlasher.

wrong!!! the extractor extracts key only, the rest is over the sata. your extractor worked correct!!!!
yes everything looks good until the erase did you power cycle the drive within 1 sec by jacking the power in and out after clicking on lite on erase in jf, then under flash chip properties they should be some info .

[hassle]

everything went fine using dos.
I had to try it a few times to get the vendor status but its good.

The problem occured when i tried to power cycle during the erase, when i did it i was using the system to power it and when i hit the poer button it stayed on to cool off the machine and wouldnt turn back on for about 5 seconds or so. From now on im using my connectivity kit v2 to power it.