Topic: Full Xbox360 Game Raw Dump (Read 1821 times)

Suburban Kid · « **Reply #270 on:** July 26, 2006, 06:45:00 PM »

can this program adapt to xbox1 games?

if not, can i backup my xbox1 games without plugging my xbox360 through my computer?
is it even possible to backup xbox1 games using a 360?

jakeyboy1972 · « **Reply #271 on:** July 31, 2006, 12:15:00 PM »

I have been trying to dump PG3 iso and all i keep getting is "Error @ 0 : Data error (cyclic redundancy check)."

I am using an NEC ND-3500AG burner, i have used the different settings and all i get is 3.6gigs instead of the 6.7 i should have.

Please help as im going mad!!!!!!

(?) · « **Reply #272 on:** July 31, 2006, 07:46:00 PM »

Im confused. Does this require the firmware hack? Also will it work with an external dvd burner?

Jenna_Tellya · « **Reply #273 on:** July 31, 2006, 11:33:00 PM »

Im using an Lg so far dumping 360 games works good, but I cant read 1 single xbox1 game, I always get Cycle Redundance error at the same spot of the disc after 4 tries. Yes I cleaned the disc as well. Anyone got any info on that??

Wayne

McBilly · « **Reply #274 on:** August 02, 2006, 05:15:00 PM »

Wow that's a pretty clever tool you've devised man. A few tweaks and it sounds like it will be pretty kick-@ss.

dodgyness · « **Reply #275 on:** August 04, 2006, 05:00:00 AM »

Hi been using this now for about 3 days got seven coasters now

presuming that the ss bin files are wrong yet i read somewhere you can burn you origanal with the incorrect ss bin file?...My games are PAL which is a bummer coz there are diff versions of PAL releases well so far failed on burnout revenge....pgr3...Moto06
all showing red in ss merger 1.6 and coming up as unreadable on my TS drive with xtreme firmware but then Ridge Racer and DOA4 backed up fine still showing red in ss merger 1.6

Any info or help on this could it be that DOA4 and Ridge Racer are unlocked regions...

Suburban Kid · « **Reply #276 on:** August 06, 2006, 01:03:00 AM »

i also am having problems...

i've tried every tutorial on here and i'm coming up with no results, just coasters.

i have a TMS360 MOD but all i seem to be getting are messages of "please insert this sic into a 360 console" or
the disc is dirty (something along those lines, which it isnt)

if anyone can give me a tip or two so i can backup my games, it would be so much appreciated as i dont want my origionals to be ruined.

.Ben.

jj6590 · « **Reply #277 on:** August 06, 2006, 04:48:00 AM »

ok just to make sure i'm getting this right by using gael's ripper program you extract the full raw data of the xbox360 game put that into a iso then do this (below), burn it to a disk and you can actually play the ripped game on your 360?? (IMG:style_emoticons/default/love.gif)

also- does this work with games were you can you play online like Battlefield 2 with the ripped cd?

QUOTE(PSoff @ Jul 24 2006, 09:39 AM)

You need to rip the game, rip the ss.bin, then load up Ss Merger and 'Merge' the game and ss.bin together. Once this is done, you will have a Game.ISO that can be burned, aswell as a Game.DVD file which contains the LAYER BREAK information. You can either use CloneCD as the tutorials show, or DVD Decrypter.

Finally make sure your BOOKTYPE is set to DVD-ROM and not 'Normal'.

Basically do this checklist every time and you should rarely get a coaster:

1) I have verified my ISO and SS.bin (with SS Merger)
2) I have MERGED them together with SS Merger (after verifying)
3) I have specified the LAYER BREAK in my burning program
4) I have changed the BOOKTYPE of my DVD Burner to DVD-ROM.

If you miss one of these steps the game won't work. The ISO is the game itself, and the SS Bin is the 'serial number' in a sense. Just like Windows or any other app, If you don't have the serial number, you can't load the program. Same goes for Layer break and Booktype. The layer break is where layer 1 of your 'dual layer' disc stops and layer 2 begins. If this is incorrect, the 360 won't be able to read both layers properly.

Finally, the 'booktype' normally corresponds with whatever media you're using. For example, if you burn a DVD-R, the booktype is DVD-ROM. If you burn a DVD+R Dual Layer, the booktype is DVD+R DL. The 360 is programmed to only read games on DVD-ROM discs. So if you leave your Booktype to 'Normal', and burn your game to a DVD+R DL disc, the 360 will see that its a DL and not a DVD-ROM and won't boot it. If you change the booktype to DVD-ROM and then burn, the 360 will see it as a DVD-ROM disc even though it's really a DVD+R DL.

Hope this helps!

P.S (offtopic) how do i change my gamercard umdermeath my name?

Thanks in advance (IMG:style_emoticons/default/biggrin.gif)

This post has been edited by jj6590: Aug 6 2006, 11:57 AM

jj6590 · « **Reply #278 on:** August 06, 2006, 03:55:00 PM »

its been 12 hours and no one can answer my question?

lickwid · « **Reply #279 on:** August 07, 2006, 10:57:00 PM »

What's the point of using the hot-swap method with a DVD-Rom or DVD-Burner to backup your ISO's when you still have to use the Xbox 360 DVD Drive to rip out the Security Sectors??

Is there any way to rip the Security Sectors using a standard DVD-Rom or DVD-Burner?

Thanks in advance.

ushbeki · « **Reply #280 on:** August 08, 2006, 01:04:00 PM »

Hey can somebody help me

does anyone know how i can play the game ncaa football 07=ntsc on my pal xbox 360

thx

jtom617 · « **Reply #281 on:** August 08, 2006, 08:38:00 PM »

QUOTE(ushbeki @ Aug 8 2006, 08:11 PM)

Hey can somebody help me

does anyone know how i can play the game ncaa football 07=ntsc on my pal xbox 360

thx

check if the game is region free. Usually its more like PAL games will play on NTSC consoles. But i think its the same the other way too. Google for region free games.

ushbeki · « **Reply #282 on:** August 09, 2006, 05:54:00 AM »

hey

but when the game is not region free is their somehow a way to play the game like crack regioncode or something??

would be nice if sombody could answer it

thx

Mastercheif76 · « **Reply #283 on:** August 09, 2006, 03:26:00 PM »

QUOTE(PSoff @ Jul 24 2006, 03:39 PM)

You need to rip the game, rip the ss.bin, then load up Ss Merger and 'Merge' the game and ss.bin together. Once this is done, you will have a Game.ISO that can be burned, aswell as a Game.DVD file which contains the LAYER BREAK information. You can either use CloneCD as the tutorials show, or DVD Decrypter.

Finally make sure your BOOKTYPE is set to DVD-ROM and not 'Normal'.

Basically do this checklist every time and you should rarely get a coaster:

1) I have verified my ISO and SS.bin (with SS Merger)
2) I have MERGED them together with SS Merger (after verifying)
3) I have specified the LAYER BREAK in my burning program
4) I have changed the BOOKTYPE of my DVD Burner to DVD-ROM.

If you miss one of these steps the game won't work. The ISO is the game itself, and the SS Bin is the 'serial number' in a sense. Just like Windows or any other app, If you don't have the serial number, you can't load the program. Same goes for Layer break and Booktype. The layer break is where layer 1 of your 'dual layer' disc stops and layer 2 begins. If this is incorrect, the 360 won't be able to read both layers properly.

Finally, the 'booktype' normally corresponds with whatever media you're using. For example, if you burn a DVD-R, the booktype is DVD-ROM. If you burn a DVD+R Dual Layer, the booktype is DVD+R DL. The 360 is programmed to only read games on DVD-ROM discs. So if you leave your Booktype to 'Normal', and burn your game to a DVD+R DL disc, the 360 will see that its a DL and not a DVD-ROM and won't boot it. If you change the booktype to DVD-ROM and then burn, the 360 will see it as a DVD-ROM disc even though it's really a DVD+R DL.

Hope this helps!

So... Do I need the firmware hack to do this or not?

Fluxburn64 · « **Reply #284 on:** August 09, 2006, 05:09:00 PM »

This might sound silly, but couldn't you run some sort of emulation for the hotswap disc?

Author Topic: Full Xbox360 Game Raw Dump (Read 1821 times)