xboxscene.org forums

Pages: [1] 2 3

Author Topic: Team Xtek: Status Lite  (Read 309 times)

TeamXTek

  • Archived User
  • Newbie
  • *
  • Posts: 7
Team Xtek: Status Lite
« on: December 01, 2004, 06:13:00 PM »

Welcome to the official Team XTek Status Lite BST.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Please note: All Status Lite mods are currently on pre-order and will ship no later than December 14, 2004. Prices are USD (US Dollars.)

Status Lite -- Allows you to place LEDs above the controller ports (or wherever you like,) that change from one color to another when a controller is inserted in the associated port. There are several options for purchasing the Status Lite:

Pictures coming soon...
  • Complete Status Lite, Assembled -- Comes complete with everything you need. Simply attach +5v and ground, isolate the controller port shielding from the rest of the Xbox case shielding (easy, instructions inclued,) solder one wire to the back of each controller port, and mount your LEDs where you want.
    Cost: $30 + Shipping (see below)

  • Status Lite Unassembled, Without LEDs, LED Wires, or LED Resistors -- Everything you need to solder up your own Status Lite, aside from the LED specific parts. You need to supply your own LEDs, wires, and 1/4 watt resistors for the LEDs. Comes complete with all the switching circuitry and PCB (printed circuit board.)
    Cost: $20 + Shipping (see below)

  • Bare Status Lite Printed Circuit Board -- Just the PCB. Nothing else. You will need to obtain your own resistors, transistors, LEDs, and wires.
    Cost: $10 + Shipping (see below)

Available bi-color LEDs -- You can choose between:
  • Blue/Red
  • Blue/Green
  • Blue/White
  • Red/White

Please make sure to specify the color you want along with which colors you want when there is no controller inserted and which color you want when a controller is inserted.

More products coming soon...

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Shipping & Handling -- All shipping is done via USPS Priority Mail. Up to 3 items per large envelope, 1 item per small envelope.
  • United States -- $5.00 per standard envelope (up to 3 items)
  • Canada -- $5.00 per small envelope (1 item only,) $8.00 per standard envelope (up to 3 items)
  • United Kingdom -- $6.00 per small envelope (1 item only,) $10.00 per standard envelope (up to 3 items)

Placing an Order -- To place an order, use PayPal to make a payment to [email protected]. Include in the notes area when you send money exactly which product you want, along with LED color choices and configuration (if needed.) Please be sure to calculate the shipping (as noted above) and include that as well.
Logged

Arjun

  • Archived User
  • Hero Member
  • *
  • Posts: 1650
Team Xtek: Status Lite
« Reply #1 on: December 01, 2004, 06:15:00 PM »
damn this shit is hot. are the pcbs actually etched? can we get some pics please? biggrin.gif
Logged

TeamXTek

  • Archived User
  • Newbie
  • *
  • Posts: 7
Team Xtek: Status Lite
« Reply #2 on: December 01, 2004, 06:30:00 PM »
Yes, the pcbs are etched and come complete with a labled silkscreen for easy component placement if you decide to assemble your own.

All we have right now are pictures of an assembled pre-production revision 1.0 pcb (All are now rev 1.1. A few cosmetic changes, minor functionality improvement.)

Here's some pics. I'll post some of just the rev 1.1 pcb and another pre-production assembled unit later tonight or tommorrow:

(IMG:http://teamxtek.com/xtek-files/slpics/v1.0/PICT0001_1.jpg)

(IMG:http://teamxtek.com/xtek-files/slpics/v1.0/PICT0004_1.jpg)

(IMG:http://teamxtek.com/xtek-files/slpics/v1.0/PICT0005_1.jpg)

(IMG:http://teamxtek.com/xtek-files/slpics/v1.0/PICT0006_1.jpg)

That is a 1.0 pcb. The new ones look MUCH better. Expect to see less hot glue and flux as well ;)

The last picture is a picture of the back which has velcro on it for easy mounting and removal. Shipped versions will be either velcro or double sided foam tape. Probably the tape as it is cheap. If you want velcro, send us an extra $1 (USD) and we'll do it. Be sure to make a note in your order.
Logged

mdfirefighter

  • Archived User
  • Full Member
  • *
  • Posts: 176
Team Xtek: Status Lite
« Reply #3 on: December 01, 2004, 07:14:00 PM »
bump for the team.

MDFF
Logged

darkplayer

  • Archived User
  • Full Member
  • *
  • Posts: 108
Team Xtek: Status Lite
« Reply #4 on: December 01, 2004, 11:14:00 PM »
ohmy.gif
Logged

TeamXTek

  • Archived User
  • Newbie
  • *
  • Posts: 7
Team Xtek: Status Lite
« Reply #5 on: December 01, 2004, 11:34:00 PM »
Logged

mdfirefighter

  • Archived User
  • Full Member
  • *
  • Posts: 176
Team Xtek: Status Lite
« Reply #6 on: December 02, 2004, 07:35:00 AM »
QUOTE (darkplayer @ Dec 2 2004, 02:17 AM)
ohmy.gif

Is that amazement? or suprise? Share your thoughts with us.

MDFF
Logged

velocityboy

  • Archived User
  • Newbie
  • *
  • Posts: 8
Team Xtek: Status Lite
« Reply #7 on: December 02, 2004, 12:03:00 PM »
Maybe a stupid question -- but how do you advise to connect it to the motherboard? Or are you required to solder to each port?
Logged

mdfirefighter

  • Archived User
  • Full Member
  • *
  • Posts: 176
Team Xtek: Status Lite
« Reply #8 on: December 02, 2004, 12:11:00 PM »
QUOTE (velocityboy @ Dec 2 2004, 02:59 PM)
Maybe a stupid question -- but how do you advise to connect it to the motherboard? Or are you required to solder to each port?

At this time we don't have the solderless kit. To install you will have to solder the 5v and ground wire to the source of your chooseing. Then you have to solder the trigger wires to the controller ports. There are some other steps in there that will be included in the install guide. But thats the jist of it.

MDFF
Logged

Maverick0984

  • Archived User
  • Sr. Member
  • *
  • Posts: 452
Team Xtek: Status Lite
« Reply #9 on: December 02, 2004, 12:43:00 PM »
what exactly does the unassembled version come with then? the $20 one.  it seems pretty stripped down for $10 more.  does it come with instructions for the resistors needed for common LED voltages?
Logged

mdfirefighter

  • Archived User
  • Full Member
  • *
  • Posts: 176
Team Xtek: Status Lite
« Reply #10 on: December 02, 2004, 12:58:00 PM »
QUOTE (Maverick0984 @ Dec 2 2004, 03:39 PM)
what exactly does the unassembled version come with then? the $20 one.  it seems pretty stripped down for $10 more.  does it come with instructions for the resistors needed for common LED voltages?

The unassembled version comes with
-The PCB
-The transistors
-The resistors for the transistors
-Installation guide including a list of the resistors we use for the LEDs we install.

Basically it comes without the LEDs, resistors for the LEDs, and the labor.

MDFF
Logged

Maverick0984

  • Archived User
  • Sr. Member
  • *
  • Posts: 452
Team Xtek: Status Lite
« Reply #11 on: December 02, 2004, 02:22:00 PM »
oh alright, so it has the sets of resistors that are already on the board
Logged

Shillow

  • Archived User
  • Newbie
  • *
  • Posts: 18
Team Xtek: Status Lite
« Reply #12 on: December 02, 2004, 03:00:00 PM »
When you buy a complete kit, you specify which LEDs you want from the list above. We then install the correct value resistors on the board. Everything is ready to go.

When you buy an unassembled kit, you get everything except the LED related parts. No LEDs, or the wires to the LEDs from the circuit board. Since there is no LEDs, there are no resistors for LEDs, as it makes no sense to include them. You will need to supply your own LEDs, LED resistors, and wire to connect the LEDs to the pcb.
Logged

Shillow

  • Archived User
  • Newbie
  • *
  • Posts: 18
Team Xtek: Status Lite
« Reply #13 on: December 02, 2004, 03:02:00 PM »
When you buy a complete kit, you specify which LEDs you want from the list above. We then install the correct value resistors on the board. Everything is ready to go.

When you buy an unassembled kit, you get everything except the LED related parts. No LEDs, or the wires to the LEDs from the circuit board. Since there is no LEDs, there are no resistors for LEDs, as it makes no sense to include them. You will need to supply your own LEDs, LED resistors, and wire to connect the LEDs to the pcb.
Logged

Chappy316

  • Archived User
  • Newbie
  • *
  • Posts: 40
Team Xtek: Status Lite
« Reply #14 on: December 02, 2004, 04:02:00 PM »
bump for an awesome product and a double post.... now i just need to find a crystal front panel replacement so i dont have to drill holes in my original......

chappy
Logged
Pages: [1] 2 3
« previous next »