xboxscene.org forums

Pages: 1 2 3 [4] 5 6 ... 13

Author Topic: Dedicated Temperature Thread  (Read 1132 times)

Haygar

  • Archived User
  • Sr. Member
  • *
  • Posts: 285
Dedicated Temperature Thread
« Reply #45 on: January 25, 2010, 03:03:00 PM »

Yeah I believe so. You just get a fixed speed except for the original auto of course.

But it will be cooler, just keep an eye on temps every now and then if your using a low speed setting.
Logged

ddxcb

  • Archived User
  • Sr. Member
  • *
  • Posts: 330
Dedicated Temperature Thread
« Reply #46 on: January 25, 2010, 04:20:00 PM »

I made 10 threw 100 tongue.gif
Logged

Looouky

  • Archived User
  • Hero Member
  • *
  • Posts: 789
Dedicated Temperature Thread
« Reply #47 on: January 28, 2010, 08:33:00 PM »

played 5 hrs straight of me2, fans running at 90

and temperatures were 45 across the board.

XENON untouched....
Logged

firefighter1023

  • Archived User
  • Jr. Member
  • *
  • Posts: 57
Dedicated Temperature Thread
« Reply #48 on: January 29, 2010, 10:39:00 PM »

I read through the entire post, I haven't noticed anyone reporting any results by replacing the GPU heatsink with a 2nd Gen CPU heatsink.  Anyone have any results for this mod?
Logged

pirichios

  • Archived User
  • Full Member
  • *
  • Posts: 230
Dedicated Temperature Thread
« Reply #49 on: January 30, 2010, 02:01:00 AM »

CPU: 52
GPU: 58
EDRAM: 56
MB:32

Xenon with patched fans running at 80%
is this good by common standards?
Logged

Need Help Now!

  • Archived User
  • Full Member
  • *
  • Posts: 143
Dedicated Temperature Thread
« Reply #50 on: January 30, 2010, 02:33:00 AM »

I took a bit of a risk myself hoping not to brick my Development Kit using the fan patcher and the old fantool xex's :X, thankfully it ended up working fine on a 256BB Jasper. I read about some people having their xbox spitout errors after patching and running it, but I got through fine.

After setting my speeds to 100%, I left my kit on at the H3B Main Menu where it flies around a real 3d valhalla for a little over two hours, here's a picture I took of the temperatures afterwards. Figured it would somewhat accurately demonstrate gameplay without me actually having to be present.

IPB Image

Just a side note, but I've noticed jaspers seem to be running a hotter MB temperature then other revisions, kinda funny.

Maybe later I'll go back to the 44speed and get a 'before' temperature picture. I'm curious as to how much cooler the jaspers run anyway. No other modifications have been made to the Kit.

-NHN!
Logged

Evilove

  • Archived User
  • Newbie
  • *
  • Posts: 4
Dedicated Temperature Thread
« Reply #51 on: January 30, 2010, 09:37:00 AM »

Motherboard : Xenon  dry.gif  2007 (used)

Mod : Stock Fan with Full power (100%)

Room Temperature : ~ 27C

Start up Temp

CPU : 52C
GPU : 42C

After 1 hour of playing

CPU :  57C
GPU :  50C
Logged

FutabaGP

  • Archived User
  • Newbie
  • *
  • Posts: 23
Dedicated Temperature Thread
« Reply #52 on: January 31, 2010, 12:57:00 AM »

After some play
CPU 76
GPU 92
EDRAM 87
MB 40
 flamethrower.gif
Xenon with stock systems.
Logged

morinzo

  • Archived User
  • Jr. Member
  • *
  • Posts: 65
Dedicated Temperature Thread
« Reply #53 on: January 31, 2010, 08:57:00 AM »

INFO:
Model: Premium (FALCON)
MFR Date: 09/28/2007
Usage: Light
Fans: Stock
Fan Speed: 70speed.xex
Case: Assembled
Temps read via: XeXMenu v1.1

Room Temp ~ 20C

20 mins XeXMenu

CPU: 38.2C
GPU: 41.8C
EDRAM: 41.4C
MB: 27.9c

Replaced X-Clamps (as a preventative measure, it has never RROD'd), thermal paste replaced with AS5 (CPU+GPU).
Logged

yaazz

  • Archived User
  • Hero Member
  • *
  • Posts: 1370
Dedicated Temperature Thread
« Reply #54 on: January 31, 2010, 09:35:00 AM »

QUOTE(dakaku @ Jan 31 2010, 08:58 AM) View Post

Just to show what is possible:

CPU: 48.7 GPU: 38.3 EDRAM: 38.7 MB: 29.2
after 1h in xexmenu 1.1
Jasper 256MB, vertical position

My mods:

NO stock fan
NO DVD-Drive (its useless with xbr, anyway)
internal HDD (red)

80mm Revoltec Air Guard at stock fan controller running at 100% (unhearable) over HANA (yellow)
120mm Noctua NF S12-1200 running at 12V (unhearable) over CPU/GPU Heatpipe (green)
Heatsinks on HANA/RAM

IPB Image

I had 52°CPU, because the airflow is kinda bad with the fan on top. Since i had 4 RAM Heatsinks left i just placed those at the side of the CPU cooler straight into the airflow, which brought the CPU down to ~49°C.
I have a cool and quiet xbox360 now.


are the fans blowing in or out
Logged

YoungGeekGuy

  • Archived User
  • Jr. Member
  • *
  • Posts: 76
Dedicated Temperature Thread
« Reply #55 on: February 01, 2010, 12:11:00 AM »

QUOTE(Haygar @ Jan 30 2010, 07:44 AM) View Post

I'm concerned about the gpu readings i'm seeing from everyone. My jasper is at best around 39C for CPU and 52C for GPU, always at least above 10C difference between the cpu/gpu.
Today it was around 33C ambient and with the fans at 80% it was at 50C cpu and 64C gpu.
Should I be concerned, this is a new box and never had the mobo out of the frame, maybe a poor heat transfer with the heatsink?
Can anyone with a jasper give some light.

Around 22 ambient and after hosting an XP lobby on MW2 for 5 hours my CPU was just over 60c, GPU was 64c, these were stick speeds. You should be concerned about your ambient temp, are you playing Xbox in a sauna? That's why its so hot, your ambient is 33c.
Logged

kipper2k

  • Archived User
  • Sr. Member
  • *
  • Posts: 423
Dedicated Temperature Thread
« Reply #56 on: February 01, 2010, 10:07:00 AM »

QUOTE(FutabaGP @ Jan 31 2010, 08:57 AM) View Post

After some play
CPU 76
GPU 92
EDRAM 87
MB 40
 flamethrower.gif
Xenon with stock systems.


 If you dont get those temps down soon you will be RROD, is that an original box, no xclamps etc ?
Logged

viper8695

  • Archived User
  • Newbie
  • *
  • Posts: 14
Dedicated Temperature Thread
« Reply #57 on: February 01, 2010, 05:42:00 PM »

QUOTE(FutabaGP @ Jan 31 2010, 01:57 AM) View Post

After some play
CPU 76
GPU 92
EDRAM 87
MB 40
 flamethrower.gif
Xenon with stock systems.



jeeze! water boils at 100C! how is your box not smoking???

you def need the fan speed .xex

check this out for sure!
http://forums.xbox-s...p;#entry4625045
Logged

yaazz

  • Archived User
  • Hero Member
  • *
  • Posts: 1370
Dedicated Temperature Thread
« Reply #58 on: February 02, 2010, 12:10:00 PM »

Just so you guys know, XEXmenu temps are almost like IDLE temps. when you are playing a game add at least 20 degrees on to the temps you see.
Logged

dakaku

  • Archived User
  • Full Member
  • *
  • Posts: 102
Dedicated Temperature Thread
« Reply #59 on: February 05, 2010, 01:04:00 AM »

For those who are interested in the "120 fan mod"

Before plastic cards (see page 4 or 5):
CPU: 48.7 GPU: 38.3 EDRAM: 38.7 MB: 29.2

With plastic cards, after 2 hours ftping:
CPU: 42 GPU:38 EDRAM 38 MB 30

I added 2 old plastic cards to force the airflow though the cpu. Very easy.

IPB Image

white: plastic cards
red: hdd
yellow/green: fans

I have and leave the original X-Clamps in.
X-Clamp replacement would probably bend the board even more.
Logged
Pages: 1 2 3 [4] 5 6 ... 13