Topic: Wireless Adapter Setup (Read 95 times)

Gir489 · « **on:** July 06, 2006, 01:54:00 PM »

You just need the LIVE! addition to your Dashboard.

Do the following:

SETTINGS -> NETWORK SETTINGS -> ADVANCED -> WIRELESS -> SETTINGS -> NETWORK NAME

It will do the stupid Live! loding circle thing, which is so ghey, and then come to a screen that says 'SELECT NETWORK', and which time... select your network.

It will do the stupid circle thing, again, and then it should go to the Wireless Status page, at which you should be go to go. IPB Image

kl1k · « **Reply #1 on:** July 06, 2006, 03:17:00 PM »

Nope - doesnt work. ive entered the network name, but when i got to the wireless setting is says no wiresless adapter found

(((

Gir489 · « **Reply #2 on:** July 06, 2006, 05:04:00 PM »

QUOTE(kl1k @ Jul 6 2006, 05:24 PM)

Nope - doesnt work. ive entered the network name, but when i got to the wireless setting is says no wiresless adapter found

(((

Did you check the PATCH5 cable? It might be broken.

kl1k · « **Reply #3 on:** July 07, 2006, 12:06:00 AM »

Yip - I'm 200% sure of the cable. Took it from a working machine. Also tried a crossover cable as well. still no luck.

Gir489 · « **Reply #4 on:** July 07, 2006, 10:22:00 AM »

OK, then. Check the port where you plug the RJ-45 plug into, and see if it's damaged.

Check if any of the connectors are like sticking up, or touching another.

kl1k · « **Reply #5 on:** July 07, 2006, 11:23:00 AM »

I fixed the problem.

You wont believe it but it was a power supply problem. I'm not quite sure what led me to it but the power supply was giving out 5.6V.

I got another power supply. This ones gives out 6.2V and the xbox adapter works perfectly now. Updated the firmware and all working 100%

Thanks for the help.

Gir489 · « **Reply #6 on:** July 07, 2006, 03:55:00 PM »

QUOTE(kl1k @ Jul 7 2006, 01:30 PM)

I fixed the problem.

You wont believe it but it was a power supply problem. I'm not quite sure what led me to it but the power supply was giving out 5.6V.

I got another power supply. This ones gives out 6.2V and the xbox adapter works perfectly now. Updated the firmware and all working 100%

Thanks for the help.

Hum. I use one that's a 5V, and it works. IPB Image

kl1k · « **Reply #7 on:** July 09, 2006, 01:11:00 AM »

Still having problems

If I setup the xbox adapter and my wireless access point to have no security everything works fine - but this is a little too insecure for liking. when I ebable WEP (either 64 bit or 128 bit) the xbox adapter refuses to see my access point.

On the xbox i've selected infrastructure, the host name is the same as my ssid, and selected 64bit wep with the same security key as on my WAP. still no luck. what am I doing wrong?

I've got a surecom 9410sx. both wap and xbox adapter are on the latest firmware.

kl1k · « **Reply #8 on:** July 09, 2006, 01:48:00 AM »

Ok - scratch the previous reply. I went back to basics. (After a strong cup of coffee)

Reset both WAP and xbox adapters and resetup IPs and keys. Now working with WEP!!!

Author Topic: Wireless Adapter Setup (Read 95 times)