Topic: Best Modchip To Use For Xbox Live ? (Read 116 times)

Altimeter88 · « **on:** January 04, 2005, 08:58:00 PM »

I have the X2 in a 1.6 and live works great. I purchased the system, did the mod and HDD upgrade, locked the HDD, disabled the modchip and played on Live just fine.

lordvader129 · « **Reply #1 on:** January 04, 2005, 10:33:00 PM »

any modchip is as good as th enext, id say make sure you use a bios with Live blocking though (i think yuo can add that to m8)

b166ir · « **Reply #2 on:** January 05, 2005, 03:38:00 AM »

So far I dint signed in with my new xbox yet so if I upgrade to a new hard disk I will not get banned right ? I dint used xbox live yet with this new xbox

also i'm thinking about getting the Xecuter 3 then add a switch to the d0 point just to be sure its complete disabled

b166ir · « **Reply #3 on:** January 05, 2005, 06:56:00 AM »

Ok I just ordered Xecuter 3 v1.6 rebuild PCB

Should I just use the D0 point to a switch to be 100 % sure that the chip is disabled so it doasnt magicly turns on when using xbox live ?

aaron1017 · « **Reply #4 on:** January 05, 2005, 11:49:00 AM »

I have a Crystal 1.6 Xbox with an X3 and go online 24/7 and am just fine. The blue modchip light stays on when its disabled though.

chasealicious11 · « **Reply #5 on:** January 05, 2005, 05:36:00 PM »

the d0 switch would not work because that is used to boot off the lpc on boot

b166ir · « **Reply #6 on:** January 05, 2005, 11:06:00 PM »

Where should I attach a switch to then to be sure its completely disabled when I turn the switch to off so xbox live doasnt turn it on with there jedi powers

lordvader129 · « **Reply #7 on:** January 06, 2005, 05:30:00 PM »

for a 1.6? get a DPDT switch and put it on LAD0 and LFrame (this will require you to use wires to rebuild those points and not your PCB)

b166ir · « **Reply #8 on:** January 06, 2005, 10:29:00 PM »

QUOTE(lordvader129 @ Jan 7 2005, 02:01 AM)

for a 1.6? get a DPDT switch and put it on LAD0 and LFrame (this will require you to use wires to rebuild those points and not your PCB)

danhrules · « **Reply #9 on:** January 07, 2005, 09:38:00 AM »

My setup (in sig) works great on Live, I got banned once 'cause I accidently turned the chip on. I just insert a stock HDD to play Live and I flashed a new EEPROM

b166ir · « **Reply #10 on:** January 09, 2005, 02:38:00 PM »

Does anyone els use a DPDT switch with Excuter 3 to be 100% sure it stays off when you switch it to off ?

Calpico · « **Reply #11 on:** January 12, 2005, 02:23:00 AM »

QUOTE(b166ir @ Jan 9 2005, 11:09 PM)

Does anyone els use a DPDT switch with Excuter 3 to be 100% sure it stays off when you switch it to off ?

Author Topic: Best Modchip To Use For Xbox Live ? (Read 116 times)