Topic: Newbie Screwed Unbanned (Read 72 times)

undead · « **on:** March 07, 2003, 03:40:00 PM »

DiD YoUr CaPs LoCk GeT sTuCk

Dont type all caps, its very impolite !

second, make sure the .ini file specifies the correct spot where you put the eeprom.bin file..

gugu · « **Reply #1 on:** March 07, 2003, 05:32:00 PM »

i did the path is good

shanafan · « **Reply #2 on:** March 07, 2003, 06:51:00 PM »

Just like I already told you, you have to UPDATE the EEPROM. When you load it, it just loads the current Xbox's EEPROM

Use the UPDATE EEPROM command

BTW, again, please don't use caps, it is annoying and some people just wont help you because of it

shanafan · « **Reply #3 on:** March 07, 2003, 08:04:00 PM »

Here is my configmagic.ini
Hope this helps...

#****************************************************************
#ConfigMagic Configuration File..
#****************************************************************
#Please note ALL fields and Values are Case Sensitive !!
#****************************************************************

# ************** SPECIFY OPTIONS IN THIS SECTION ***************
[MAIN]
#ConfigMagic should be able to auto detect your XBOX Version
#but if you are having problems, Force your version here..
#valid values are 1.0 AND 1.1
#WARNING: DO NOT USE THIS IF AUTO DETECT WORKS FINE !!
#YOU COULD BREAK YOUR XBOX WITH WRONG VALUE !!!!
#XboxVersion      = 1.0

# ************ SPECIFY INPUT FILES IN THIS SECTION *************
[INPUT_FILES]
#NOTE ONLY Drives C, D, E, F are supported !!
#Remember that D is always the normal relative App Path !!
EEPROMBinFile      = "C:(backslash)eeprom(backslash)neweeprom.bin"
EEPROMCfgFile      = "C:(backslash)eeprom(backslash)neweeprom.cfg"

# ************ SPECIFY OUTPUT PATH IN THIS SECTION *************
[OUTPUT_FILES]
#NOTE ONLY Drives C, D, E, F are supported !!
#Remember that D is always the normal relative App Path !!
#This path is used for writing backup files to.. Make sure it exists !!
#This default will write to the root of E drive
BackupFilesPath      = "C:(backslash)eeprom(backslash)backupeeprom.bin"

shanafan · « **Reply #4 on:** March 07, 2003, 08:06:00 PM »

QUOTE (gugu @ Mar 8 2003, 12:02 AM)

ok when i update the eeprom, is it suppose to go in my config.ini on the input line and laod the eeprom that i've put on my cdrw in the folder data and am i suppose to see a difference on the screen when i update it (like serial number and mac etc....)
thanks again
and terribly sorry for the caps
marc

Well yes, when it is does, it should be different

BUT, when you choose "Load EEPROM from BIN File", it should access the BIN file in the input section of the ini

shanafan · « **Reply #5 on:** March 07, 2003, 09:18:00 PM »

gugu, PM user 'undead'. He is the creator of the program. Ask him if you need help with that, as it should work

PS, you did select "Load EEPROM from BIN" command, correct?

shanafan · « **Reply #6 on:** March 07, 2003, 10:07:00 PM »

The EEPROM.BIN file should be 1k

shanafan · « **Reply #7 on:** March 07, 2003, 10:25:00 PM »

I will try to load Configmagic and an EEPROM from a CDRW, will report what happens

shanafan · « **Reply #8 on:** March 07, 2003, 10:58:00 PM »

Hmm, it won't load my backup EEPROM off the CDRW...does it load for you?

BTW, why can't you just put it on your HD? Seems easier for you

shanafan · « **Reply #9 on:** March 07, 2003, 11:09:00 PM »

Hmm, now it is giving me all zeros for my backup EEPROM I have when I load it from its BIN file...oh well, it's late...

Author Topic: Newbie Screwed Unbanned (Read 72 times)