The Following are quotes from the Pinned XYZ code thread
at the top of this forum.
It answers all your questions:
"Great News Everyone! GOT XBOX LIVE TO WORK AGAIN!
( See my previous post on page 2 of this thread )
http://forums.xbox-s...ST&f=21&t=14993Well, I got an eeprom dump from another xbox and flashed mine with the data.
For reference it was Superfro's program EEPromerv0.4 that made it possible!
(PLEASE DO NOT EMAIL AND ASK ME FOR IT!)
Pixal8's blank eeprom will not work.
Superfro, you RULE man, Thank you!!!!!
I did have to recover the account but that was not too difficult. It was like installing my account on another xbox. Very easy and it's done through account management.
OK, here are the old settings:
1.00.4920.01
X: 0000 - 000D
Y: 00A8 - 6800 (Bad)
Z: 8015 - 190D
UL: 0KB DL: 0KB
L: 0 P: 0 / 0
And here are the new settings after the eeprom switchover:
1.00.4920.01
X: 0000 - 000D
Y: 00A8 - 4800 (Good)
Z: 0000 - 0000
UL: 9765KB DL: 3530KB
L: 105 P: 8 / 8
I'm in the US, use a BioXX (detailed setup is in my sig) and both IP and DNS are manual.
Good luck everyone and remember not to try to get on LIVE with your mod ON!
How To Get Your XYZ Info.ATTENTION, THIS TUTORIAL ASSUMES YOU HAVE ALREADY FULLY INSTALLED XBOX LIVE!
1.Turn off your modchip and go to the Xbox Dashboard.
2.Click on the Xbox Live Tab.
3.Go to Network Connections.
4.Wait for the Green Lights (or red X'es depending on your setup) to load.
5.Once they load highlight the help button.
6.Over the help button press the Y button.
7.An X code a Y code and a Z code will come up along with more packet data including upload and download speed.
8.Take note of these Numbers.
9.Post results in Xyz Code, Uncoded on the Xbox-Scene forums in the Xbox Live section
-Fuzzy
Examples:
never been modded xbox...
all settings automatic...
X: 0000 - F001
Y: 00A8 - 4860
Z: 8015 - 1917
Xbox Live XYZ Codes Explained. ~FuzzyX:0000:F001
Y:00A8:4860 Good
Z:8015:1917
X: 0000 - 000D
Y: 00A8 - 6800 Bad
Z: 8015 - 190D
X. First of all, the first four numbers of x should always be zeros. They SHOULD always but I haven't seen one that isn't (if yours isn't contact me.)
Y. 00A8 seems to be common among banned and not banned boxes. Now here is where the problem is. Apparently 6860 indicates an LPC mod that is enabled or a non switched non-LPC mod enabled. 6820 means that the system had once had a modchip in it but at the moment is not running. Other wise it should be something like 4840, 4820 or 4860.
Z. The last row (a.k.a Z) has to do with packets and trashed responses.
(OpJose)
I've been able to confirm that an 8015 in the first Z field indicates
(only IF you have a full and valid connection to the internet/xblive servers)
that your EEPROM is "consistent".E.G. if you are able to change the HD key and get back a 8015, as far as the kerberos servers were concerned your EEPROM's state is "good".
Meaning that the servers think that the encrypted stuff is ok.
The information in the "user" area of the EEPROM does not seem to affect the 8015 results.
This does NOT mean that you can get on XBLive however.
It DOES mean that once we can get 8015 values out of generated HD key's we will have the right formula to unban Xboxes!!!!!!!
This is a BIGGGGGGG Hint for the hackers. (/OpJose)
A good code should look something like this:
X: 0000-F021
Y: 00A8-4840
Z: 0000-0000
IF YOUR SECOND Y CODE BEGINS WITH A 6 YOU ARE BANNED.
SO FAR NO ONE TO BE BANNED HAS EVER HAD ANYTHING OTHERWISE. THIS IS THE EASIEST WAY TO TELL.
I would appreciate if some more people (banned and not) posted their codes.
This is what I have deciphered and I believe it is 99.9% correct. I hope it is of some use to Zander, Opjose, Undead, Or someone. Thanks for your time
This post has been edited by Fuzzy on Dec 4 2002, 01:53 AM
Good luck everyone and remember not to try to get on LIVE with your mod ON!"