Print

[mirx999]

QUOTE (h1tman @ Mar 26 2004, 10:35 PM)

question is have u beat the game first? otherwise its stupid if you havnt.

shut up.

[mirx999]

alright i've managed to get invincibility (not invisibility) to work.  in the Offline folder, edit ThirdEchelonUser.ini.  almost all the way at the bottom, you'll see a few joystick layout lines.  Use those.  it's layed out like this:

;Button Name
Button Position = Button Function

for example

CODE

;R1, Right Joy8=Fire

the first part of the button name line is the PS2 layout afaik, and the 2nd is the xbox layout.  you can see the button function there.

I did this using the duck button as a test.

change

CODE

;Circle, B Joy2=Duck

to

CODE

Circle, B Joy2=Invincible

I got the Invincible button function from looking at the keyboard layout part of thirdechelonuser.ini.  reupload thirdechelonuser.ini to the directory, clear the cache (not sure if this is necessary, but i do it just in case), load up a game, and try using the B button to toggle invinicibility.  there is no visual confirmation if it works, so just go near an enemy.  if they shoot you and your controller vibrates, it means invinicibility is off.  if it doesn't vibrate, invincibility is on and your health shouldn't be going down.  i'll test this with other functions later.  For now, though, have fun.

[spgurley]

cool
nice work
i'll try it

[mirx999]

Thanks.

From here on in, i'll only be posting function names and what they do.  Also, it's not necessary to clear the cache.  This way, you can make whichever button you want perform that function.  The function for invisibility is "Invisible 1".

[spgurley]

would there be any possible way at all to get the keyboard drivers in the games so you can use a keyboard? the kaybord has all the cheats mapped to it

[mirx999]

i doubt it, and i have no way of trying....

[havocaose]

QUOTE (mirx999 @ Mar 27 2004, 05:16 PM)

QUOTE (h1tman @ Mar 26 2004, 10:35 PM) question is have u beat the game first? otherwise its stupid if you havnt. shut up.

i agree, anyways.. when you said hacking the game do you mean online (rb6:3) or offline.. like making sam a large pokemon.

EDIT: i agree with the shutup part... not the other part

[h1tman]

QUOTE (mirx999 @ Mar 27 2004, 05:16 PM)

QUOTE (h1tman @ Mar 26 2004, 10:35 PM) question is have u beat the game first? otherwise its stupid if you havnt. shut up.

lol, okay, its pretty fucking stupid to hack somethin u havnt beatin. otherwise its no fun. cheating online is gay anyways.

[spgurley]

i only want to hack it as a chalenge, to mess around in the levels ive already beaten

cheating to beat the game before youve beaten it already is gay

[SomeT]

Hey mirx999 nice work do you know the function so you can fly through walls and stuff, like you could on splinter cell one? Also if you do know could you post how to put it/assign it to a button?

[mirx999]

I only do offline stuff (thirdechelonuser.ini is in the Offline folder of splinter cell, i'm not gonna bother touching anything else).  As for the no clipping...i'm working on it.  assigning functions to a button was explained earlier in this thread.

[mirx999]

alright i've made a few more discoveries

you can make a button perform 2 functions by putting a | between them...

Invisibility is turned off by mapping a button to perform the function "Invisible 0"

No Clip mode is the function "Ghost"
No Clip is turned off by the function "Walk"

[mirx999]

double post.

This post has been edited by mirx999: Mar 28 2004, 03:51 PM

[mirx999]

function for Maximum Ammo is Ammo and the function for Maximum Health is Health.

[phonix_9924]

CODE

I was messing about with my .ini files this morning and here are some of the interesting things that I found (there are a lot more, but I havent documented them yet). BTW, good work Mirx999, keep it up. NOTE: All the below are located in your .ini files that are in SPLINTERCELLPATH/Offline/ Just replace the values with what you want ----------------[ Esetting.ini ]------------------- [Echelon.EPlayerCam] m_speedRun=999999.0   // SPEED WHICH SAM RUNS m_speedRunCr=999999.0   // SPEED WHICH SAM RUNS WHEN CROUCHED m_speedWalk=99999.9   // SPEED WHICH SAM WALKS m_speedWalkCr=99999.9   // SPEED SAM WALKS WHEN CROUCHED m_speedWalkFPCr=999999.0   // SPEED SAM WALKS WHEN IN FirstPerson and Crouched m_speedWalkJammer=999999.0  // SPEED SAM WALKS WHEN USING JAMMER m_speedWalkJammerCr=99999.0 // SPEED SAM WALKS WHEN CROUCHED WITH JAMMER m_speedWalkSniping=999999.0   // SPEED WHEN SNIPING [Echelon.ESniperNoise] pitchSize=0.0// THESE VALUES WILL MAKE IT SO YOUR SNIPER VIEW WONT MOVE pitchSpeed=0.0  // UP AND DOWN WHEN SAM BREATHES. yawSize=0.0 yawSpeed=0.0 noiseUpSpeed=1.6 noiseDownSpeed=1.6 recoilSize=0 recoilPitchAdd=0 recoilYawAdd=0 recoilUpSpeed=0.0 recoilDownSpeed=0.0 recoilFatigueUp=0.0 fatigueRecoilMaxSize=0 fatigueRecoilUpSpeed=0.0 fatigueRecoilDownSpeed=0.0 holdMax=200.0   // THIS VALUE IS THE TIME THAT SAM CAN HOLD THE SNIPE STILL tiredMax=0.0 [EchelonIngredient.EStickyCamera] minfov=1000000000.0 maxfov=90000000000000.0 zoomspeed=50000000000.0  // ZOOM SPEED damping=1000.0 [Echelon.EchelonGameInfo] bNoGore=true       // ENABLE GORE MinBeforeDamage=999999999.0     // MIN FALL DISTANCE BEFORE DAMAGE MaxBeforeDeath=999999999.0     // MAX FALL DISTANCE BEFORE DEATH m_RollSpeed=350000000.0    // ROLL SPEED -------------------[ ThirdEchelonUser.ini ]---------------------- // JUST REPLACE YOUR KEYS WITH THE BELOW Format of button layout ; PS2_CONTROL, XBOX_CONTROL KillSam      // Kills SAM (obviously) ShowAllPawns       // Cycles Through Enemies (if you push b (get out weapon) before you do this you will be able to shoot the enemy) Killpawns       // Kills ALL enemies Invincible       // DOES WHAT IT SAYS Invisible 1       // TURNS ON INVISIBILITY Invisible 0       // TURNS OFF INVISIBILITY eg: replace ;R2, Black Joy6=Whistle with ;R2, Black Joy6=Invisible 1     NOW WHEN YOU HIT [BLACK BUTTON] YOU WILL BE Invisible -----------------[ OTHER INTERESTING FEATURES ]---------------------- TO EDIT YOUR LOAD SCREENS REPLACE THE FOLLOWING: SPLINTERCELLPATH\Offline\screenshot\ loding_progress.tga    // LOAD SCREEN \English\*       // LEVEL LOADING SCREENS (the .tga files can be read with PhotoShop) ---------------[ Watch The ENDING or any other .bik file ]--------------------- Replace SPLINTERCELL\Default\Video\UbiLogoPAL.bik with SPLINTERCELL\Offline\videos\CompleteEnding2.bik (remember to rename it as UbiLogoPAL.bik) This will replace the ubisoft logo the BIK file that you have replaced.

This post has been edited by phonix_9924: Mar 28 2004, 04:53 PM