Print

[Jezz_X]

And for reference this is the exact same logging level from my 4th april compile that does work with exactly the same settings
Both set to debug logging and samba level 10 loging
http://jezz.bencue.c..._oldversion.log  <--- this is the working one 4th april
http://jezz.bencue.com/xbmc.log  <--- New XBMC-CVS_2006-04-21-T3CH build that dosn't work

[tslayer]

Do you have a firewall of sorts?  In the failed log, it looks to be trying to use port 445 for SMB instead of 139.

Check to see if 445 is allowed through.

TS

[tslayer]

Jezz,

And until you run with a new build (after the 23rd), this won't be looked at any further.

TS

[Jezz_X]

QUOTE(tslayer @ Apr 28 2006, 06:24 AM)

Jezz,

And until you run with a new build (after the 23rd), this won't be looked at any further.

TS

tslayer
I actually tried this with a home compiled build of the 27th for me 26th for you (but stopped using it because I ran into a problem of the IP address setting keybord didn't work) But I will compile another build as of right now and try it again.   And why would the 445 port be used in the new version but not the old ? Is it a standard port for samba ? looks like the old version used port 137  
I am running Outpost pro firewall but I completely unloaded it and tried again as well as Norton anivirus (not internet security) and I do not have windows firewall running
I would also like to point out that my xbox is placed in my trusted zone section of my firewall so its allowed to do anything on my network without getting blocked

But like I said I'll compile a new build right now and try again and see if I can get my firewall to ignore all port 445 for my xbox even though I'm sure it allready does

[Jezz_X]

I would also like to point out that dvd2xbox which I think uses the old way xbmc did to access samba currently has no problems as well

[tslayer]

Post new logs with new build.

As for 445, yes, 445 is a standard port for smb.  Search google.

TS

[Jezz_X]

OK heres a different log with the new build, firewall unistalled network reset back to default mshome and going into the same share

http://jezz.bencue.com/newxbmc_old.log <---- old workingbuild
http://jezz.bencue.com/newxbmc.log <---- 27th build not working

[elupus]

well.. as said before port 445 is a standard port for samba so it should work.. but it is timeing out.. could you increse the timeout value for samba and try again.. should be in gui settings (if it wasn't removed allready, then in xboxmediacenter.xml, clienttimeout).. the standard samba value is 40.. we have it set to 10.

the problem seem to be that your computer accepts the connection to 445, but then just doesn't return any valid data.. if it had blocked 445, it would have fallen back to 139 i think

nice info on port 445
http://www.petri.co....45_in_w2kxp.htm

[faster90]

I am having the same problem when I updated my XBMC to XBMC-CVS_2006-04-27-T3CH\XBMC built. Sharing has alway been working till now.

Here's my log,

unix_err:'7' nt_err : 'c0000122' error : 'Invalid computer name'
10:16:05 M: 40812544   ERROR: CGUIMediaWindow::GetDirectory(smb://192.168.4.100/Music/) failed
10:16:05 M: 40812544   DEBUG: CGUIMediaWindow::GetDirectory ()
10:16:05 M: 40812544   DEBUG:   ParentPath = []
10:16:05 M: 40812544   DEBUG: RetrieveMusicInfo() took 0msec
10:16:07 M: 44625920    INFO: Loading skin file: Home.xml

I try with user/pass and still same error

10:15:44 M: 40804352   ERROR: SMBDirectory->GetDirectory: Unable to open directory : 'smb://user:[email protected]/Music/'
                             unix_err:'7' nt_err : 'c0000122' error : 'Invalid computer name'
10:15:44 M: 40812544   ERROR: CGUIMediaWindow::GetDirectory(smb://user:[email protected]/Music/) failed
10:15:44 M: 40812544   DEBUG: CGUIMediaWindow::GetDirectory ()

Wierd  

[faster90]

I found my solution. Turn out my WMI was corrupted and after fixing that, SMB is working.  

[Jezz_X]

QUOTE(faster90 @ May 3 2006, 02:55 AM)

I found my solution. Turn out my WMI was corrupted and after fixing that, SMB is working.  

Care to share how you fixed it ?

[rafaqat]

CODE

22:35:05 M: 40071168   DEBUG: CVideoDatabase::GetMoviesByPath query = select * from path join files on path.idPath = files.idPath join movieinfo on files.idMovie = movieinfo.idMovie where path.strPath like '%smb://192.168.1.102/InternalVideos' or path.strPath like '%stack://smb://192.168.1.102/InternalVideos'
22:35:16 M: 40054784   DEBUG: CPlayerCoreFactor::GetPlayers(smb://192.168.1.102/InternalVideos/Pirates of the Caribbean.avi)
22:35:16 M: 39530496    INFO: mplayer play:smb://192.168.1.102/InternalVideos/Pirates of the Caribbean.avi cachesize:8192
22:35:16 M: 39530496   DEBUG: CURL::CURL - Url has no protocol Pirates of the Caribbean.avi, empty CURL created
22:35:16 M: 39530496   DEBUG: CURL::CURL - Url has no protocol subtitles, empty CURL created
22:35:18 M: 33312768   DEBUG:   msg:  set audio functions called
22:35:18 M: 33312768   DEBUG:   msg:  done
22:35:19 M: 33312768    INFO: smb: write_data: write failure in writing to client . Error Invalid argument
22:35:19 M: 33304576    INFO: Loading skin file: DialogProgress.xml
22:35:22 M: 32907264    INFO: FileSmb->Open: Unable to open file : 'smb://192.168.1.102/InternalVideos/Pirates%20of%20the%20Caribbean.avi'
                             unix_err:'16' nt_err : 'c0000008' error : 'Invalid handle'

This line here seems to concern me the most.

CODE

22:35:19 M: 33312768    INFO: smb: write_data: write failure in writing to client . Error Invalid argument

I've used SharePoints on the mac to set up the SMB share and I've opened up read/write permissions to everyone.  Used to work on the November 2005 release.

Any ideas?

[sc00bs]

Hi

I was having a similar problem after updating to the 13/04/06 release.

I run a Linux NAS box called NASLITE, it is a small Linux build with Samba shares, no passwords. Was all working 100% prior to updating to the 13/04 build, I then started having issues with it not always seeing my workgroup. Sometimes it would work, sometimes not. I thought it was perhaps a cable problem or something but after investigation ruled this out. Conection to the internet was working 100% and I was able to FTP files to the local hard drive for playback, I only has to do this a few times when I could not access the Samba share. This issue, whatever was causing it, however seems to have been rectified as I am now running the 27/04 build and have had no issues

JohnB

[rafaqat]

QUOTE(sc00bs @ May 4 2006, 08:01 PM)

Hi

I was having a similar problem after updating to the 13/04/06 release.

I run a Linux NAS box called NASLITE, it is a small Linux build with Samba shares, no passwords. Was all working 100% prior to updating to the 13/04 build, I then started having issues with it not always seeing my workgroup. Sometimes it would work, sometimes not. I thought it was perhaps a cable problem or something but after investigation ruled this out. Conection to the internet was working 100% and I was able to FTP files to the local hard drive for playback, I only has to do this a few times when I could not access the Samba share. This issue, whatever was causing it, however seems to have been rectified as I am now running the 27/04 build and have had no issues

JohnB

strange that you had an intermeittent problem with a previous build and it seems to work fine on the 27th Apr release.  How do you know it's still not intermittent and that you're in a period when it's working.   (IMG:style_emoticons/default/wink.gif)

I was hoping someone would know what the write errors meant.  It looks like it's trying to write back to my mac's external drive which doesn't seem right.  It's just a straight read surely?

[Jezz_X]

Well Ive tried that rebuilding the WMI thing and its still no go for me I even tried a 2nd may build and I still have the exact same problem with it