Topic: Help! (Read 136 times)

jfoster1234 · « **on:** April 26, 2005, 10:34:00 PM »

i made an iso, put it in my comp, set my bios to boot from cd, and it says"disc boot error. please insert system disc snd press enter." what did i do wrong?

Soullar · « **Reply #1 on:** April 27, 2005, 12:44:00 AM »

* You burned the iso as a file instead of as an image.
or
* Burning speed was too high, try lowest possible.

jfoster1234 · « **Reply #2 on:** April 27, 2005, 02:25:00 PM »

it didn't work. i burned it as an image in nero at 4x.

Soullar · « **Reply #3 on:** April 27, 2005, 03:15:00 PM »

Weird ....

I remember having the same problem some time ago ... I used a CD-RW, which was using the full 700 MB. It also stated 'boot disc error insert disc etc etc", hitting 'enter' a couple of times did start it though.

Maybe try a different brand disc, a smaller iso (if possible) or a CDR instead of a CDRW (or the other way around).

Other than that I'm out if options, at least this reply gave you another bump =)

Lamer123 · « **Reply #4 on:** April 27, 2005, 03:50:00 PM »

Did you use make-iso-win.bat ?

jfoster1234 · « **Reply #5 on:** April 27, 2005, 05:54:00 PM »

yes, could someone give me a step by step guide using nero?

This post has been edited by jfoster1234: Apr 28 2005, 12:54 AM

Soullar · « **Reply #6 on:** April 27, 2005, 11:39:00 PM »

Just go into the 'recorder' menu and choose : 'burn image'

Select the iso you just made, burn it and you're done.

jfoster1234 · « **Reply #7 on:** April 29, 2005, 04:36:00 PM »

that didn't work

jfoster1234 · « **Reply #8 on:** April 29, 2005, 04:58:00 PM »

is it because i'm using windows 95?

kingroach · « **Reply #9 on:** April 29, 2005, 05:09:00 PM »

what is you max RAM>. xboxhdm need atleast 64MB of RAM..

jfoster1234 · « **Reply #10 on:** April 29, 2005, 05:20:00 PM »

damn, it's 32 mb. do you think my dell will freeze lock my hd. i got it to years ago. i can't turn off auto-detection on my primary ide 0 channel, but i can turn it off on primary ide 1. could i use xboxhdm to format my hd if it was on primary ide 1? how would i hook my hd to it?

This post has been edited by jfoster1234: Apr 30 2005, 12:24 AM

Seany · « **Reply #11 on:** April 30, 2005, 07:18:00 AM »

QUOTE(kingroach @ Apr 29 2005, 10:08 PM)

what is you max RAM>. xboxhdm need atleast 64MB of RAM..

Before you start you'll need another 32MB of RAM before you do anything with xboxhdm i'm afraid

QUOTE

how would i hook my hd to it?

I don't think it matters what IDE you put it on by the way.. (as long as the jumper settings are right i.e master/slave)
Leave CD-ROM drive on auto-detect(IDE-0) and the HD on IDE-1.Have both HD and CD-ROM set to master since they will both be on seperate IDE cables.

Reboot with xboxhdm (with your 64MB RAM) and go from there..

Note:
When burning the ISO in Nero, make sure you "finalize the cd" This could have an impact on some drives booting from the CD..

jfoster1234 · « **Reply #12 on:** April 30, 2005, 08:47:00 AM »

nevermind, i got my hd working with chimps

Author Topic: Help! (Read 136 times)