xboxscene.org forums

Author Topic: Ind Bios With Xecuter 3 Ce........  (Read 30 times)

effbee05

  • Archived User
  • Full Member
  • *
  • Posts: 132
Ind Bios With Xecuter 3 Ce........
« on: November 29, 2005, 04:38:00 AM »

Is your current setup with a F and G partition? If so use iND-BiOS.5003.67.bin
If it's just one big F drive then use iND-BiOS.5003.06.bin
The config maker makes the .ini the bios gets it's settings from, it goes in the root of C
So run the config maker and setup the .ini how you want it and FTP that to C: then flash whichever bios you need and thats it. And all the custom flubbers and all go in C: also.
Logged

Devastater

  • Archived User
  • Newbie
  • *
  • Posts: 12
Ind Bios With Xecuter 3 Ce........
« Reply #1 on: November 29, 2005, 07:26:00 AM »

what happens if the config file isn't there? does it frag? and what would happen if an invalid flubber.x file was in the C:\ ? would it frag then too or would it just skip the flubber animation and go strait to the default dash? thanks for your help..... biggrin.gif
and ya i have it set to all F:\ so i'll flash the iND-BiOS.5003.06.bin to bank 5 and set the switches to
on on off on, (correct me if i'm wrong)
Logged

deadparrot

  • Archived User
  • Hero Member
  • *
  • Posts: 1252
Ind Bios With Xecuter 3 Ce........
« Reply #2 on: November 29, 2005, 01:41:00 PM »

Whatever you do, DO NOT FLASH THE BFM ONE!  It will screw you over big time as BFMs are not meant to be flashed onto chips.
Logged

Devastater

  • Archived User
  • Newbie
  • *
  • Posts: 12
Ind Bios With Xecuter 3 Ce........
« Reply #3 on: November 29, 2005, 08:41:00 PM »

**** are you serious vcause i flashed the bfm's to my chip trying to make the bios work but no effect to my knowledge........any invisible effects to my banks that i flashed them 2?  

(edit)
craaaaaaap,
ok i used the config wizard and it made a cfg file so i put that on the xbox C:\ and u said it should be ini so i made a copy of it and made that an ini.....
i flashed the 06 to the box and it didn't work.......i even flashed it to bank 8 which has never been touched and it didn't work so it couldn't be the bfm bios .......
oh ya, i made the default dash F:\evoxdash.xbe
is that a problem and does it have to be on the c or is it something else?
i even took off my custom flubber thinking that might have something to do with it but nothing.....
suggestions?
Logged

effbee05

  • Archived User
  • Full Member
  • *
  • Posts: 132
Ind Bios With Xecuter 3 Ce........
« Reply #4 on: November 30, 2005, 04:25:00 AM »

Oh my bad the iND bios extension is .cfg tongue.gif ind-bios.cfg
The dashboards can be on any drive
Logged

Devastater

  • Archived User
  • Newbie
  • *
  • Posts: 12
Ind Bios With Xecuter 3 Ce........
« Reply #5 on: November 30, 2005, 08:25:00 AM »

then what am i doing wrong?
i flashed my bios with 06 because i have it all set to the F:\
i have the config file on the C:\
so whats the problem.........
the only thing i can think of is that i have a 1.6 box........does ind-bios support 1.6 xboxes?
ive even tried flashing it with the 67 file cause the 06 won't work and still nothing.......
what am i doing wrong? blink.gif
Logged

effbee05

  • Archived User
  • Full Member
  • *
  • Posts: 132
Ind Bios With Xecuter 3 Ce........
« Reply #6 on: November 30, 2005, 02:27:00 PM »

Hmm according to XS BIOS chart the iND BIOS doesn't support 1.6
Logged

deadparrot

  • Archived User
  • Hero Member
  • *
  • Posts: 1252
Ind Bios With Xecuter 3 Ce........
« Reply #7 on: November 30, 2005, 02:31:00 PM »

BFM = Bootable From Media.  They're only for use with PBL, and other BIOS loaders.  I;ve only heard of bad things happening when they are flashed to chips.  They never work on a chip, 100% garunted.
Logged

Devastater

  • Archived User
  • Newbie
  • *
  • Posts: 12
Ind Bios With Xecuter 3 Ce........
« Reply #8 on: December 01, 2005, 08:43:00 AM »

well can i use 4003 and does it support thr replacement flubber option?
Logged