Topic: Removing Evox Boot Logo (Read 195 times)

Manta_2005 · « **Reply #15 on:** November 10, 2005, 03:29:00 AM »

Cheers for your help mate, I appreciate it alot.

Oh well back to the drawingboard..

Manta_2005 · « **Reply #16 on:** November 10, 2005, 03:32:00 AM »

You were right too btw, it is an Aladdin chip..

I'm such a fuckstick.

Manta_2005 · « **Reply #17 on:** November 10, 2005, 03:54:00 AM »

May have found the solution down the bottom of this page..

http://www.modchip.com/xbox/directions.htm

I'll probably stuff that aswell!

StrictPuppet · « **Reply #18 on:** November 10, 2005, 04:09:00 AM »

I dont believe you will be able to fix it with out a programmer, or by hotswap flash on another modded box.... but maybe someone else has a solution.

Manta_2005 · « **Reply #19 on:** November 10, 2005, 04:33:00 AM »

My mate got exactly the same Aladdin chip / EvoX bios installed that I did.
What is this hot swap thing?

Thanks.

Edit: Yeah just found the tut. No way I'm opening the sucker up, I've done enough damage!

This post has been edited by Manta_2005: Nov 10 2005, 12:45 PM

pezzar · « **Reply #20 on:** November 10, 2005, 05:14:00 AM »

QUOTE(Manta_2005 @ Nov 10 2005, 12:40 PM)

My mate got exactly the same Aladdin chip / EvoX bios installed that I did.
What is this hot swap thing?

Thanks.

Edit: Yeah just found the tut. No way I'm opening the sucker up, I've done enough damage!

when you boot M$ dash and go to settings theres an info page and that gives kernel version. if it reports k1.00.5838 then its a v1.6 and dont use the evox M8Plus use the Evox M8Plus_16

torbjorn · « **Reply #21 on:** November 10, 2005, 05:23:00 AM »

OOOOOOOOOOHHH!!!

thats really fucked up man....

i hope u get the fix of it..

if it is an aladdin try puttin slayer disc in and boot up and se if u can do anything..

i just flashed my aladdin- but it gotta be 256 kb or ur fukkd!!

that thing in xbmc is for lpc and stuff like that.. dont mind it..

torbjorn · « **Reply #22 on:** November 10, 2005, 05:30:00 AM »

http://ps2modchip.co....php?page=30006

to flash aladdin hold down power button for 3 sec untill it flickers at boot.. then it is open..

the reason it jumps to ms could be because u got evox.dash in wrong partition..

try install evox on f and c..

Manta_2005 · « **Reply #23 on:** November 10, 2005, 06:46:00 AM »

Hey Pezzar, I found this in the M$ settings - K 1.00.5101.01.

I know how to put the Aladdin into flash mode - hold for 5 secs till Led flashes then release, but nothing happens. How can I use this method to help me? Can I reflash from a CDr or something? What bios should I use then? Pretty certain the original EvoX bios was M8 (not plus or _16).

May have to return to Mod shop and get him to hook up his Aladdin programmer.

Anyone have any thoughts?
Cheers all.

pezzar · « **Reply #24 on:** November 10, 2005, 01:57:00 PM »

this kernel version K 1.00.5101.01.
is def not a v1.6 more like a v1.4

so use the Evox M8Plus.bin not the 1.6 version

Manta_2005 · « **Reply #25 on:** November 10, 2005, 05:18:00 PM »

I think it is a v1.4. I also think the original bios I had was EvoXM8 (without the plus), perhaps this caused the problem? Another cause might be that I didn't copy the new hash thingo (givin by EVtool) to the evox.ini file, after I changed things in the bios (all I did was 'remove Evox logo')?
Is there a way to use a boot disc to at least be able to FTP to the xbox, so I could add the appropriate file(s) to the evox.ini - or is this unlikely to even be the problem?

Thanks again guys.

pezzar · « **Reply #26 on:** November 11, 2005, 09:22:00 AM »

remove the flashed bios and re flash it

Manta_2005 · « **Reply #27 on:** November 12, 2005, 12:12:00 AM »

I'm not messing with it anymore. Took it back to the place I had it installed so they can hook their programmer up to it.
No more playing around with bios's for me.

pezzar · « **Reply #28 on:** November 12, 2005, 03:59:00 PM »

Author Topic: Removing Evox Boot Logo (Read 195 times)