Topic: Ind-bios Vga Support (Read 898 times)

Textbook · « **Reply #75 on:** January 13, 2006, 06:55:00 AM »

Ok, I got it working. It was in the value of my resistance. I really don't know why all these guides tell you to use 680K ohm if it's not going to work for everybody. I tried using a lower resistance (470K ohm) and it works just fine now.

Textbook · « **Reply #76 on:** January 14, 2006, 03:51:00 PM »

For a comparison between S-Video and HD, go to THIS PAGE and check it out for yourself. It's pretty amazing how much clearer the picture is. Not only that, but it's a lot easier to carry around my flat-panel monitor than it is my huge TV.

Textbook · « **Reply #77 on:** January 15, 2006, 04:13:00 PM »

Disable 720p and 1080i. Most monitors can't handle it. Test only with 480p. After you get that working, you *might* be able to get 720p.

dfect · « **Reply #78 on:** February 04, 2006, 01:23:00 PM »

Anyone tried building after this scheme?, this one have one more chip on it.., does anyone know the funcion of using the 7404 to the 1881 .. is the signal inverted on the ps2?

IPB Image

Textbook · « **Reply #79 on:** February 12, 2006, 11:23:00 AM »

First time I have ever seen that particular setup. The diagram was created very well though, includes all the pinouts. I'm just not sure why they chose a 2-chip solution to split the sync, when they could have used the lm1881 to do it. So, it seems like it's basically 2 chips doing the job of 1.

shahab street no 49 · « **Reply #80 on:** March 27, 2006, 07:11:00 AM »

please excuse my english
anyone please tell me that how can i flash the ind bios 5003.67 to my xbox and how can i resize it
does anyone know that ind bios is flashed to specific xbox with 256kb tsop or it can be flashed with xbox version 1.0 and 1.1 with 1mb tsop chip

shahab street no 49 · « **Reply #81 on:** March 27, 2006, 07:49:00 AM »

QUOTE(shahab street no 49 @ Mar 27 2006, 07:18 PM)

please excuse my english
anyone please tell me that how can i flash the ind bios 5003.67 to my xbox and how can i resize it
does anyone know that ind bios is flashed to specific xbox with 256kb tsop or it can be flashed with xbox version 1.0 and 1.1 with 1mb tsop chip i have xbox with conexant video chip what version of bios should i use please reply i have already dumped 2 consoles i have xecuter2 modchip

Joshua Wood · « **Reply #82 on:** March 30, 2006, 06:16:00 PM »

QUOTE(shahab street no 49 @ Mar 27 2006, 03:18 PM)

please excuse my english
anyone please tell me that how can i flash the ind bios 5003.67 to my xbox and how can i resize it
does anyone know that ind bios is flashed to specific xbox with 256kb tsop or it can be flashed with xbox version 1.0 and 1.1 with 1mb tsop chip

Read the info for what xbox versions it supports... I think the vga one only supports 1.0 and 1.1. Both have a 1mb tsop. Using the latest version of Evox to flash will automatically resize the bios to 1mb for you, so you don't have to worry. Likewise, if you're tsop is split into 2x512k or 4x256k, Evox will sort it out for you.

This applies to any bios. Regular ind-bios (non vga) works on 1.0 - 1.5 I believe, but again, check the readmes.

shahab street no 49 · « **Reply #83 on:** April 01, 2006, 07:11:00 AM »

thanks for the reply i have version 1.2 xbox so this version outputs the vga signals or i have to use the bios to get them and what bios should i use to get the vga output i have the pixel8 diagram but my xbox shows nothing but the sounds of the dashboard and i also have a ps2 and i made the vga cable using the sync splitter and the 7404 chip it worked for me and i want to know is that what kind of chip is 7404 and can we use it in the xbox vga cable

shahab street no 49 · « **Reply #84 on:** April 03, 2006, 08:06:00 AM »

QUOTE(shahab street no 49 @ Apr 1 2006, 07:18 PM)

thanks for the reply i have version 1.2 xbox so this version outputs the vga signals or i have to use the bios to get them and what bios should i use to get the vga output i have the pixel8 diagram but my xbox shows nothing but the sounds of the dashboard and i also have a ps2 and i made the vga cable using the sync splitter and the 7404 chip it worked for me and i want to know is that what kind of chip is 7404 and can we use it in the xbox vga cable

please tell me that ind bios 5003 compatibility with the mod chips

DarkLegion · « **Reply #85 on:** April 05, 2006, 07:18:00 PM »

ind-bios 5001-vga works with 1.0-1.5 xbox, so yes, it will work with your 1.2.It should work with any modchip as it is only 256k.

shahab street no 49 · « **Reply #86 on:** April 06, 2006, 02:44:00 AM »

thanks man but what about the diagram it will work on xbox or not
what is the chip 7404

Mooner2 · « **Reply #87 on:** April 11, 2006, 08:16:00 AM »

Has anybody had any luck with the Dell 2405FPW. Supposedly it supports SOG but I haven't had any luck with it, the picture dosen't even come up but a few words saying it can't display the picture. Any help?

veeper · « **Reply #88 on:** June 19, 2006, 10:19:00 AM »

QUOTE(shahab street no 49 @ Jun 13 2006, 09:27 AM)

will u tell me what is 7404 chip is and can i use it in xbox vga cable
hello i made the cable and flashed ind 5001vga bios but my result is like s-video
i mean the result is clear but it is not detailed will u tell me what is wrong

Make shure 480p is selected.

LivHard · « **Reply #89 on:** June 20, 2006, 05:01:00 PM »

QUOTE(sonix @ Oct 18 2004, 09:19 PM)

my config
xbox v1.2 (conexant video chip)
viewsonic vp171 lcd display (with sync on green)
vga through hd pack
evox is my dashboard

the bios works alright but the picture is way too fuzzy, fuzzy as in antenna reception fuzzy. i would rather use a tv tuner instead. but i wont cuz i want TRUUUE VGA

. the screen also goes blank every several minutes and goes right back on. anyone know whats going on here if its the bios or its my hd pack or what?

Same problem with me, I have the Vx922 monitor.. Grr I'm sorta pissed, but its no biggy.. especially when it happens in games.. seems its mayb something with khz ?!?

Author Topic: Ind-bios Vga Support (Read 898 times)