Topic: Im Using Debug Bios But Big Problem... (Read 110 times)

junit0524 · « **on:** June 29, 2004, 12:12:00 AM »

how can i flash my bios using debug bios? without a programmer also.

ViNCe_V · « **Reply #1 on:** June 29, 2004, 12:19:00 AM »

If you did not mess up the original flash (which you didn't say you had), then you can simply use the same program that you used to flash the debug bios on. In other words, you can use evox or raincoat again.

geniusalz · « **Reply #2 on:** June 29, 2004, 05:24:00 AM »

Try patching the evox/flashx xbe for debug bios (there should be tools around), and then burn it (with a bios) to a CD/DVD and boot with that.

BenJeremy · « **Reply #3 on:** June 29, 2004, 08:21:00 AM »

EvoX Dash doesn't like debug bioses.

FlashX should work, though...

junit0524 · « **Reply #4 on:** June 29, 2004, 11:06:00 AM »

junit0524 · « **Reply #5 on:** June 29, 2004, 11:16:00 AM »

no im using debug bios and i need to reflash the debug bios and make it M7.

AE6689 · « **Reply #6 on:** June 29, 2004, 11:43:00 AM »

You can use evox and launch it from the XDK Launcher. Then all you have to do is choose flash bios and flash away.

Kaiser Zero · « **Reply #7 on:** June 29, 2004, 02:25:00 PM »

Get the evoxdash.xbe and open it in dexbe. Then go to flags and check debug (Under region), then File -> Patch to Debug Version, then save and exit.

Now the debug bios should boot the debug evoxdash.xbe. Good luck.

BCfosheezy · « **Reply #8 on:** June 29, 2004, 03:42:00 PM »

AE6689 · « **Reply #9 on:** June 29, 2004, 06:59:00 PM »

Well then do the same with a different xbox app like FlashX that will reflash your bios.

junit0524 · « **Reply #10 on:** June 29, 2004, 07:33:00 PM »

i tried flashx and evox xbe when i open them in dexbe i get some I/O Error 131 message?

Kaiser Zero · « **Reply #11 on:** June 29, 2004, 09:54:00 PM »

Hmm, sorry, I didn't think of that... It works with all of my games, so I figured it would work with newer stuff. Well, you can probably find at least ONE app that will flash, and that's all you need, I guess. Good luck.

junit0524 · « **Reply #12 on:** June 30, 2004, 12:27:00 AM »

BenJeremy · « **Reply #13 on:** June 30, 2004, 02:49:00 AM »

Why not just use PBL to load a retail BIOS and run the flashing apps with that?

bucko · « **Reply #14 on:** June 30, 2004, 03:53:00 AM »

I think an old version of evox might work in it, i remember having the same problem.

Author Topic: Im Using Debug Bios But Big Problem... (Read 110 times)