Topic: .06 Or .67 What's The Difference? (Read 189 times)

imp_assassin · « **Reply #15 on:** January 12, 2005, 08:19:00 AM »

Hmmm I am a little confused. Is the bios different than the dashboard? Sorry I am a noob but I thought I had some grasp of this. Now I think I am in way over my head. I have a smartxx V2 modchip that I just installed via pinheader on a 1.0 box seems to have worked so far. Problem is the original hdd went out prompting to go for the upgrade to the chip and a seagate 400g hdd. but I can't seem to get it working. I think I could handle it with a working original drive but I don't have that to work with and now I am confused cuz I haven't heard anything about this bios issue til now. Any advice on what to do next?

Oh yah is it there a way to download the bios or is it like roms? And ho wdo I get the slayer disk and will it help me?

This post has been edited by imp_assassin: Jan 12 2005, 04:22 PM

ckh2004 · « **Reply #16 on:** January 13, 2005, 03:53:00 AM »

QUOTE

Problem is the original hdd went out prompting to go for the upgrade to the chip and a seagate 400g hdd. but I can't seem to get it working.

What you need is X2 4983.67 bios.

Paulusss · « **Reply #17 on:** April 14, 2005, 12:37:00 PM »

I got a 200 GB HD in my box totally filld with games. I got one fat F right now, so i want to use .06 but do i have to reformat my disk for this?? or just flash and play?

It works fine now with a D6 LBA48 Support

flashfreak · « **Reply #18 on:** April 21, 2005, 07:50:00 PM »

it would've been simpler to just say .06 has one big f drive and .67 makes a g drive after 137gig

PIRATA! · « **Reply #19 on:** December 09, 2005, 04:48:00 AM »

Hi!
I am from Italy and didn't understood well what is write in first post.
I have an XBox 1.1 with Xecuter2 modchip with an actual 120Gb hdd and want to change it with a 300Gb hdd, but I have some questions about it.

If I use a .67 bios, will I have a F partition of 137Gb and a G partition of the rest or the remaning Gbs???

Will the G partition have the same filesystem that has my actual F partition or will the G partition have a filesystem that might be incompatible with some ftp or streaming softwares??

If I use a .06 bios, will I have a F partition of ALL the remaning Gb of the hdd (more then 137Gb)??

Must I use an X2 bios (X2 4983.06/67)?? Where can i find them?

Thank you very much.

ugenn · « **Reply #20 on:** March 30, 2006, 11:42:00 PM »

Is it possible to have a hdd < 137gb but not have
f: take up the rest of the space?

PSUPef2k · « **Reply #21 on:** April 03, 2006, 07:44:00 AM »

I am not sure which version I have, but regardless, my HD is 250GB and I did only an F partition when setting up my xenium gold, but it only reads about 129GB in evox. Is there anythinG I need to change to get it to see the rest? The person that sent me the bios files used it and they have a 300GB and a single F partition (no G) and it works fine. Should I start over from scratch and re-do the HD upgrade from the xenium upgrade wizard?

xclusiveafghan · « **Reply #22 on:** May 25, 2006, 04:06:00 PM »

hey i have a question..

will re-flashing your bios erase your hard drive? i have a problem with my xbox and i think re-flashing it is the way to fix it but i would like to kno if it erases your E: Drive because 200 GB of stuff on there. thx for the help.

theperfekt001 · « **Reply #23 on:** May 26, 2006, 01:36:00 PM »

it doesnt erase your hdd, but you have to make sure you flash with the same type of bios (.06 or .67)

Kampfar · « **Reply #24 on:** December 13, 2007, 02:22:00 PM »

I cant use all of my HDD space. What do I have to do to unlock all of it? I got a softmodded xbox.

Author Topic: .06 Or .67 What's The Difference? (Read 189 times)