Topic: 4981.06 An Crommwell Both On Same Chip. (Read 89 times)

ComputerDude5565 · « **on:** February 21, 2004, 12:39:00 PM »

I am planning to flash banks 3&4 (512) with Cromwell and 1 with EvoX and 2 with M7 any reson you dont think this will work.

derived · « **Reply #1 on:** February 21, 2004, 04:05:00 PM »

I don't see any reasons why it wouldn't work.

even if they are incompatible, the one on the first bank will still be bootable

Of course, if your using Ant's extension, there can't be any incompatibility issues. But IMO that's better reserved as a recovery mecahnism.

ComputerDude5565 · « **Reply #2 on:** February 21, 2004, 04:29:00 PM »

Worked great and everything is fine. Now I have 4981.06 on bank 1 M7 on bank 2 and cromwell on bank 3&4 (512K). Can I boot to bank one and start EvoX and switch to bank 3&4 and flash it, or would I need to use a bios CD booted from cromwell.

player1 · « **Reply #3 on:** February 21, 2004, 11:59:00 PM »

Now that you have this done just get hold of flashX ( not xflash) and use that m8.

It allows you to flash to individual banks .

satchel · « **Reply #4 on:** February 22, 2004, 08:07:00 AM »

you can use evox to flash them, just make sure the file is in the bios directory on your c drive and it is the proper size

player1 · « **Reply #5 on:** February 22, 2004, 12:51:00 PM »

ComputerDude5565 · « **Reply #6 on:** February 23, 2004, 11:21:00 AM »

So bank 3&4 (512K) is cromwell. I boot evox out of bank 1 and switch the dips to bank 3 and flash it with 4981. Power off. Do the samething again but flash bank four with 4981. Do you thik it will work

Author Topic: 4981.06 An Crommwell Both On Same Chip. (Read 89 times)