Topic: Flashing Bios (Read 56 times)

VOYAGERXP · « **on:** July 09, 2003, 03:53:00 AM »

I went to flash my X2 lite+ with flashx but it did not flash. The flashx menu came up and asked me to pick my bios and so i did and then said last chance press x to conferm. But did not go anywhere after i pressed x.

trob · « **Reply #1 on:** July 09, 2003, 05:48:00 AM »

Your bios.bin file on your c drive is 512kb, correct?

VOYAGERXP · « **Reply #2 on:** July 09, 2003, 08:34:00 AM »

what do ya mean 512k on c drive ? I thought because my chip had the bank jumper on that it was flashed with a 1mb bios and not 512k.

silentkiller · « **Reply #3 on:** July 09, 2003, 02:37:00 PM »

512 to flash 1 bank, 1024 to flash both. Bank selector just chooses which bank to boot from.

VOYAGERXP · « **Reply #4 on:** July 09, 2003, 05:18:00 PM »

In drive c of my xbox is 1.00mb bios. That must mean that my xbox chip was flash across both banks and not 1 right? So it has to be flashed across both banks or i will have to take my xbox apart and change the jumper over. Am i right.

Frag Daddy · « **Reply #5 on:** July 09, 2003, 06:46:00 PM »

Just leave the bios jumper on your chip if you want to flash the whole chip. Use a 1 mb bios file.

Author Topic: Flashing Bios (Read 56 times)